V Navigation Camera Dual Sunroof Heated Cooled Leather 6.2l 2010 2011 2012 Sedan on 2040-cars

Auto blog

Meet the mother-daughter team that's worked on almost every Chevy Volt

It's Mother's Day, and we're soft enough we love our mothers enough to share a new video from General Motors with you. In it, we meet Monique Watson (left) and Evetta Osbourne, a mother-daughter team that works at the Detroit-Hamtramck Assembly where GM makes the Chevy Volt (along with all of GM's other plug-in hybrids: the Opel Ampera, Holden Volt and Cadillac ELR). The two work side-by-side and have installed the lithium-ion battery pack on almost all of those vehicles - nearly 80,000 of them - since GM started making the pre-production Volts in 2009. In a prepared statement, Watson said that she likes working next to her mom, day in and day out, and they the two are totally in sync when it comes to putting the 400-pound, 16.5-kWh packs into the vehicle undersides. They two can also share stories throughout the day, and Watson said, "The arrangement has absolutely improved our relationship." Osborne started working at Detroit-Hamtramck in 1999, Watson since 2006. If you're driving a Volt today, you probably have them to thank for doing a bit of the work putting your car together. See a short video of them in action below. It's Always Mother's Day for Detroit-Hamtramck Duo Mother, daughter install lithium-ion battery pack in nearly all GM electric vehicles 2014-05-08 DETROIT – For Detroit resident Evetta Osborne, every day is Mother's Day. That's because she literally works side by side with her daughter, Monique Watson, at General Motors' Detroit-Hamtramck assembly plant. They have installed the lithium-ion battery pack on nearly every Chevrolet Volt, Opel Ampera, Holden Volt, and Cadillac ELR since production began. In fact, apart from vacation days and an occasional sick day, the mother-daughter duo has installed almost every battery pack since the Volt was in pre-production in 2009. The ELR launched earlier this year. All told – including Ampera – that's more than 80,000 electric vehicles. "We're a good team and our relationship is secondary when it comes to performing our jobs – but it's great to work alongside my daughter, said Osborne, a mother of five. Because the battery packs weigh more than 400 pounds each, automatic guided vehicles – robotic carts that use sensors to follow a path through the plant – deliver them just as the vehicle body structures glide into position overhead. The carts then lift the T-shaped packs, and Osborne and Watson guide them into the chassis and secure each one with 24 fasteners.

Cadillac scraps three-row CUV plans

Crossovers are one of the hottest automotive segments on the planet. Apparently, the idea of mixing the practicality of a station wagon with the looks of an SUV appeals to people whether they are in Cleveland or Shanghai because nearly every automaker is jumping into the market. So it was no surprise when early rumors suggested Cadillac was planning two, new CUVs to fit above and below the SRX. But things might have changed since then.
New rumblings indicate Caddy is taking a different route. Instead of two crossovers, only the compact is on the way, and the larger, three-row CUV on the Lambda platform to sit between the SRX and Escalade may be a goner. According to Ward's Auto, General Motors thinks that the other three-row, Lambda vehicles like the Buick Enclave and GMC Acadia compete too closely with the proposed Cadillac. The decision comes fairly close to the 2017 intended production date.
As far back as 2010, this Lambda-platform based CUV was considered highly likely for production. However, Cadillac Senior Vice President Bob Ferguson was somewhat cooler about it when he discussed the new crossover briefly last year. He said the model could use the Escalade name, despite its unibody chassis, but no decision had been made yet to actually produce it.

NHTSA approves hybrid rearview mirror display in Cadillac CT6, Bolt EV

The Chevy Bolt EV prototype doesn't just have a fancy new all-electric powertrain. Just outside the driver's line of sight is a newfangled rearview mirror, one that can turn into a screen that shows a moving image from the rear-facing camera. Speaking to NPR's Robert Siegel yesterday, Department of Transportation secretary Anthony Foxx said that NHTSA has now approved this type of mirror/screen for use in vehicles. According to a letter from NHTSA to General Motors, GM will likely use this Full Display Mirror first in the 2016 Cadillac CT6 before coming to the Bolt. In its letter to GM, NHTSA said that the Full Display Mirror will only qualify as a standard rearview mirror as long as there are normal side mirrors in place. In other words, don't expect to see cameras and screens replacing all the mirrors in a motor vehicle just yet. @AutoblogGreen @NPR - #NHTSA has OK'd GM rear-view system that can switch between mirror & camera views. pic.twitter.com/6CBeIit10v — Anthony Foxx (@SecretaryFoxx) February 22, 2016 The Full Display Mirror was developed by Gentex, which has long worked with GM. The FDM debuted in 2014 and some people hoped it would also make its way into the Tesla Model X. Gentex, which also makes auto-dimming mirrors, says that it has "set out to develop the technologies and core competencies necessary to manage this evolution of the rearview mirror." The Chevy Bolt EV will start at $37,500, before incentives. The 200-mile EV will go into production late this year for likely sale in early 2017. Related Video: