Save $15k Off Msrp,2.0l Turbo, Premium Pkg, Only 10k Miles, Nav, Roof, 18s on 2040-cars

Auto blog

Hennessy wastes no time in supercharging the 2015 Cadillac Escalade

The ink is still drying on the all-new 2015 Cadillac Escalade sales brochures, but that hasn't stopped Texas-based Hennessey Performance (HPE) from leaping out of the gate with its own high-performance variant. In stock form, the big fourth-generation Cadillac flagship arrives with a new small block naturally aspirated 6.2-liter Ecotec3 V8 delivering 420 horsepower and 460 pound-feet of torque. Fresh out of the showroom, the 5,900-pound SUV will sprint to 60 mph in 5.9 seconds.
While that is plenty fast for some owners, others don't want to be shamed by a 550 horsepower Mercedes-Benz GL63 AMG or a 510 horsepower Land Rover Range Rover Sport - both will leave the stock Escalade at a stoplight.
The team at HPE has come to the rescue with its HPE550 supercharger upgrade, which includes a belt-driven supercharger, air-to-water intercooler, recalibrated engine management software and a three-year/36,000 mile powertrain warranty. With 6 psi of boost, the direct-injected 6.2-liter is tuned to deliver an impressive 557 horsepower and 542 pound-feet of torque - gains of 32 percent and 18 percent, respectively, over stock. Although HPE isn't releasing performance figures as of yet, our math says that should be enough power to put the two Europeans in the Cadillac's rearview mirror. The company also offers a set of 20-inch lightweight H10 forged monoblock wheels, to further improve performance.

Reservations for Cadillac CT4-V and CT5-V Blackwing models to open in February

Cadillac will unveil its high-performance CT4-V Blackwing and CT5-V Blackwing sedans on Feb. 1 and will accept reservations for the cars the same day. Only 250 examples of each car will be built for 2022, and immediately after the reveal, customers can secure one of these Caddies with a $1,000 deposit, which is refundable. Deliveries are set to begin in mid-summer. As a special enticement, those first 250 cars will get a numbered plaque on the steering wheel, which indicates the model, transmission, and build sequence. Note that the plaque comes only on cars equipped with the high-performance steering wheel, which based on the teaser image below appears to have carbon fiber accents. It's standard on the CT5-V Blackwing and included on mid-level and higher versions of the CT4-V Blackwing. We already know that the CT5-V Blackwing will be available with carbon fiber seatbacks. More exciting news is that Cadillac will buck the prevailing trend and offer a six-speed manual transmission as standard equipment in both cars. A 10-speed automatic also will be available. It's not yet known what engine will power the sedans, although it's not expected to be the eponymous 550-hp Blackwing V8 that had an abbreviated run in the just-discontinued CT6-V. Cadillac has also announced that Blackwing buyers can avail themselves of a 2-day high-performance driving school experience at Cadillac's V-Series Academy at the Spring Mountain Motor Resort in Pahrump, Nevada. They're on their own as far as getting there, however. The unveiling of the two new Blackwings on Feb. 1 will take place at the brand's main website as well as its Twitter page. Related Video:    

Here's your chance to own a 7.0-liter V8-powered, stick-shifted Cadillac Catera

Cadillac never stuffed a V8 engine into the Catera, the entry-level model it sold in the United States from 1997 to 2001, so American tuner Lingenfelter stepped in and offered to perform the conversion. One of the few cars it dropped an eight-cylinder into is for sale, and the bigger engine is just one of many modifications performed on it. Listed on auction site Bring a Trailer, this 2001 Catera lost its V6 soon after it was leased to its first owner in Warren, Michigan. Lingenfelter replaced the 3.0-liter V6 with a 5.7-liter V8 and ditched the automatic transmission in favor of a six-speed manual, but that wasn't enough; the owner sent it back for more. It left the shop again with a custom-built, 7.0-liter V8 between its fenders. It's essentially a Chevrolet Corvette C5.R-based block topped with LS6 heads, an LS6 intake, and a less restrictive exhaust. Its horsepower and torque outputs aren't available, unfortunately, but we assume the V8 easily doubles the stock Catera's 200-horse output. Cadillac marketed the Opel-built Catera as the Caddy that zigs, not as the Caddy that humiliates hot rods on a drag strip, so additional modifications were required to keep the V8's power in check. Highlights include a limited-slip differential, a lowered suspension with bigger sway bars, and beefier brakes all around. At one point in its life, this Catera also received 17-inch alloy wheels, a three-spoke steering wheel, and a sprinkling of V emblems. Although engine swaps are often hit or miss, this Catera has spent approximately 18 years and 40,000 miles with a V8 under its hood, so it's apparently a solid, well-thought-out build. It currently has 42,000 miles on its odometer, and it's located in Michigan. Bidding stands at $6,250 as of this writing, with five days left in the auction. It won't stay in the four-digit range for long, and it might end up costing as much as a late-model ATS-V, but when are you going to find another one like it? Related Video:   Featured Gallery 2001 Cadillac Catera with V8 engine, Lingenfelter modifications View 10 Photos Aftermarket Cadillac Performance Sedan