Salvage , Repairable , Rebuildable,easy Fix on 2040-cars

Auto blog

2021 Cadillac Escalade's EPA highway fuel economy is worse than before

EPA fuel economy estimates for the 2021 Cadillac Escalade are out, and the news is mostly not good. The redesigned SUV sees slim to no improvement in the Feds' city ratings, and its highway numbers are considerably worse than before. These are estimates for the standard 6.2-liter V8. Figures for the no-cost-optional 3.0-liter turbodiesel six have not been released yet. Specifically, the rear-wheel-drive 2021 Escalade has estimates of 15 mpg city, 20 mpg highway, and 17 mpg combined. Compared to the outgoing 2020 version, powered by the same 6.2L V8, those numbers represent a 1 mpg improvement in city (the lone piece of good news) but are 3 mpg worse on the highway. With all-wheel drive, the 2021 Escalade can't even get out of the teens, with EPA ratings of 14 mpg city, 19 mpg highway, and 16 mpg combined. That's the same city rating as before and a 2 mpg decline versus the 2020 model's highway rating. For further comparison, cross-town rival Lincoln's Navigator with its 3.5-liter turbo V6 manages 16 mpg city and 22 mpg highway (RWD) and 16/21 with AWD. No one expects an ultra-large, body-on-frame, three-row SUV to achieve Prius-like levels of fuel efficiency, but it's pretty rare these days to see such backsliding with a fresh redesign. Here's hoping the diesel variant will have a happier story to tell. Related Video:

Cadillac previews upcoming new XT5 crossover [UPDATE]

UPDATE: Cadillac has released another three images, which we've added to the gallery above. Cadillac is gearing up to unveil its new XT5 crossover at the Dubai Motor Show in November. We've already seen what it'll look like - from a couple of angles, anyway - but the all-American luxury automaker has given us another taste of what's to come with a quartet of images released on its official Facebook page. Set to replace the SRX that's now six years old, the all-new XT5 adopts the new design language we've seen on newer Cadillacs of late. That's most particularly emphasized with those vertically integrated LED headlights. The sharply creased styling is also signature Cadillac, as is the egg-crate grille capped by the brand's wreath-less new emblem. The dark brown paint job also looks like it has a deep metallic flake to it, offset by satin brightwork where you might have once expected to see glinting chrome. (Then again, it could just be reflecting a uniform backdrop.) The XT5 is expected to be the first of several new Caddy crossovers to wear the letters XT. A smaller model (likely to be dubbed XT3) is tipped to slot in below, with a larger XT7 to slot in above – but still below the defiantly truck-based Escalade that's not about to go anywhere anytime soon. Sedans will continue to start their nameplates with the letters CT. But after a dozen years, the letters SRX will be retired from the Cadillac lexicon. Related Video:

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: