2014 Cadillac Cts Luxury on 2040-cars

Auto blog

2020 Cadillac CT5 debuts at N.Y. Auto Show as a proper sport sedan

The 2019 Cadillac CT5 is here, and it's not a tweener sedan. After having done battle with the luxury sedan world through cars that were either too large or too small, Cadillac is using the CT5 to take direct aim at the BMW 3 Series, Audi A4, Alfa Romeo Giulia and Mercedes C-Class. Specifically, the CT5 replaces the CTS, but takes on vehicles one class smaller than what the CTS did. So, let's take a look at what Cadillac is bringing to the table. To begin, GM knows it has a winner on its hands with the Alpha platform used on the CTS and ATS and the Camaro, so engineers adapted it to the CT5. This seems like a great start, because we all happen to love the driving dynamics from vehicles on this chassis. The wheelbase is a couple inches longer than the CTS, but the CT5 is a couple inches shorter in overall length. As a result, the wheels get pushed toward the corners of the car, leaving the CT5 with relatively short overhangs in the front and rear. It looks different than both of the to-be-discontinued Cadillac sedans, but we wouldn't call it revolutionary. The rear end isn't quite a "sportback," but it's a "faster" shape, eschewing a traditional sedan's long decklid for a sloping-roof look instead. This shape does come at the expense of rear seat headroom, but we'll dive into the interior later. We got a little preview of the powertrain setup before this official reveal, but details were scarce. The base engine is the recently new 2.0-liter turbo four-cylinder found in the Cadillac XT4. Just as it did in that vehicle, this engine makes 237 horsepower and 258 pound-feet of torque. While it might be down on power compared to the old 2.0-liter in the ATS (272 horsepower and 295 pound-feet) we found it to be incredibly smooth, refined and not lacking in thrust compared to the old unit. We're sure the four-pot will offer sufficient power for the CT5, but the 3.0-liter twin-turbo V6 is lying in wait. This engine makes 335 horsepower and 400 pound-feet of torque. Both engines are paired to a 10-speed automatic transmission and can be had in rear-wheel drive or all-wheel drive in every configuration. So yes, you can get the V6 with rear-wheel drive, thankfully. Cylinder deactivation is also equipped to both these power units — the four-banger is able to run on two cylinders, while the V6 drops to four. Cadillac was entirely transparent about its new pumped-in engine sound strategy, too.

2017 Cadillac CTS-V Drivers' Notes | V is for velocity

The 2017 Cadillac CTS-V is as close to a four-door Corvette Z06 as you're ever likely to get. Underneath the carbon-fiber hood rests one hell of an engine, a 640-horsepower supercharged V8. It's only slightly less powerful than what you'll find in the Corvette. Thanks to GM's chassis wizards, the car's handling is an equal match for the powerful engine. This particular car packs in a number of options, including Recaro seats and the performance data recorder that allows owners to measure lap times and record video. The most expensive option is the $6,950 Carbon Black Package. This nets you a carbon fiber hood vent, front splitter, spoiler and rear diffuser. This car isn't cheap, but it does undercut the less powerful Audi RS7 and Mercedes-AMG E63 S. Associate Editor Joel Stocksdale: This is a seriously fun, if also flawed, car. And the biggest contributor to the fun is the big lump of V8 under the hood. The supercharged 6.2-liter makes 640 horsepower, but Cadillac could've left the number off and just called it "effortless." The gentlest pressure on the gas pedal will result in you picking up an extra 10 mph without ever noticing. And when you stomp on it, you get this huge and immediate surge of acceleration. It's truly giggle-inducing. Although the CTS-V is big and heavy, it handles the power well. It gives you enough info on what's happening so you feel in control, and the chassis is impressively composed. The only real weak points I can find on the CTS-V (besides the low gas mileage) are the interior controls. They are abysmal. The infotainment screen is pretty poor, with a clutter of information at the main screen, and difficult-to-find commands for getting to other menus. But worse than that are the climate and volume buttons. They're all touch-sensitive spots on the center stack. They're not very responsive, and the vibratory feedback it provides isn't noticeable while driving. It doesn't help that the feedback feels pretty inconsistent, too. For me, I think I could learn to live with the infotainment, simply because I love the way the rest of the car feels and drives. But, Cadillac, you need to get to updating this ASAP. Associate Editor Reese Counts: OK, Cadillac's infotainment system sucks. Let's get that out of the way. Touch capacitive interfaces don't work well in cars. This does have the old version of CUE, so I'm hoping the next-gen system will fix some of the interface issues. Like Joel, this wouldn't turn me off from buying the car.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.