2014 Cadillac Cts Luxury on 2040-cars

Auto blog

2015 Cadillac Escalade is exactly what you expect [w/video]

Leading up to the debut of the 2015 Cadillac Escalade, we were told that the new luxo-SUV would be "much less ostentatious" and that we could expect greater differentiation from its Chevy Tahoe/Suburban and GMC Yukon siblings. And while those things may be true to some extent, after digesting the full raft of Escalade information and photography, we can say that this new 2015 model is exactly what we were expecting all along.
No, there isn't a single part of the new Escalade package makes us go "wow" or "ooh," but it still looks like a solid, nicely updated offering that will surely attract the same sort of baller status when it hits the road. For starters, the new front end has been completely redesigned, where cleaner, tauter lines work with the full-LED headlamps and running lamps to create a face that, while familiar, falls right in line with the rest of Cadillac's lineup. Around the sides, the shape is exactly the same as the rest of the SUV's platform mates, with better-fitting body panels and a handsome, upright design. Of course, 20-inch wheels are standard, and hifalutin' 22-inch rollers are available (in chrome, we assume). Things get really interesting around back, where full-LED taillamps extend from the bumper all the way up to the top of the tailgate, and - like the Tahoe/Suburban/Yukon - the rear window wiper has been integrated into the top of the hatch for a cleaner look. It all looks pretty modern and good, but doesn't really tone down the otherwise flashiness of the Escalade package.
Like its predecessor, the new Escalade will be available in standard- and extended-wheelbase formats (bring on the EXT!). Only one engine is available: GM's 6.2-liter EcoTec3 V8, good for 420 horsepower and 460 pound-feet of torque, mated to a six-speed automatic transmission. Both two- and four-wheel drive configurations will be offered, and the new Escalade should be a bit better to drive than the previous model, with a new coil-over front suspension and five-link rear setup, a wider track, variable-assist electric power steering and Cadillac's Magnetic Ride Control system with Tour and Sport modes.

2020 Cadillac CT4 spied completely undisguised for the first time

A few weeks ago, Cadillac gave us our first look at its new small luxury sports sedan in the form of the CT4-V. This was a bit unusual considering the company hadn't shown us the regular one yet, and the reveal is still off in the not-too-distant future. But we were lucky enough to catch a normal 2020 Cadillac CT4 parked at a local gas station completely and totally undisguised. Based on what we know about other recent Cadillacs and their trim and design, this CT4 is probably a Luxury or Premium Luxury trim, since it has plenty of bright chrome and red taillights instead of dark gray ones. The differences from the CT4-V are subtle. The mesh grilles of the V are swapped for a main grille studded with small Cadillac badge shapes and the lower grille has simple slats. The little air intakes by the lower sections of the running lights are smaller than the ones on the V. This car also lacks the V's side skirts and wider canards on the edges of the front bumper. There doesn't appear to be a rear spoiler either. While we've had a good look at the exterior of the CT4, we'll have to wait until the car's full reveal later this year to know what's under the skin. We do know that it will continue to use the Alpha platform shared with the CT5, Camaro and the old ATS and CTS. We suspect the base engine will be the same 2.0-liter turbocharged inline-4 from the CT5, which makes 237 horsepower and 258 pound-feet of torque. Since the CT4-V uses a turbo 4-cylinder that makes 320 horsepower and 369 horsepower, there might not be a V6 option for the regular CT4. The CT5's twin-turbo 3.0-liter V6 makes more power and torque, so that's out, and the old ATS's naturally aspirated V6 made 335 horsepower and 285 pound-feet of torque, which would be uncomfortably close the CT4-V's specs. But we could see a V6 of some sort in an even more potent V iteration of the CT4 later.

[UPDATE] Cadillac Blackwing gets ticket to Italy, to go to work in a supercar

UPDATE: It seems MAT's belief it had secured a supply of Cadillac's 4.2-liter Blackwing V8 was premature, and based on a handshake deal before GM sold its Turin engine center to Italy's Punch Group. Shortly after Hagerty ran the story, GM sent a statement to the outlet reading, in part, "We do not have an agreement in place with Manifattura Automobili Torino (MAT) to provide or sell the Blackwing engine. ... Our team is following up with MAT president Paolo Garella to discuss the misunderstanding." MAT also submitted a statement to Hagerty, saying, in part, "We thank GM for the clarification. Although a signed agreement was not finalized between the parties, we were under the impression that our counterpart was committing to making this engine available to MAT at conditions yet to be defined. ... We hope that this misunderstanding will not compromise our relations with GM and possible future collaborations." The original article follows: Some necessary cost-cutting at Cadillac led to switching the new CT4, CT5, and Escalade to older platforms. The revised architecture plan meant Cadillac's newest top-tier products couldn't fit Cadillac's newest top-tier engine, the 4.2-liter twin-turbo DOHC V8 known as Blackwing. That engine would serve limited duty at full power in the now-dead CT6-V, and at reduced output in the CT6 Platinum V8 trim before ending its bright, brief domestic life. But the story isn't over, the rebirth of Blackwing coming from a most surprising locale: Turin, Italy. Before the canceled Geneva Motor Show, Hagerty spoke to Paolo Garella, CEO of Manifattura Automobili Torino; that's the company better known as MAT, makers of the New Stratos and contract engineering house for boutique screamers like the Aspark Owl electric hypercar, Apollo Intensa Emozione, and SCG003C. Garella told the outlet, "We have an agreement with General Motors" for a supply of Blackwings, which would be developed and built at the General Motors Propulsion Engineering Center (PEC) in Turin. Since 2005, the PEC has been used to develop GM's global diesel engines and electronics. MAT's plan is to put the V8 into a new limited-run car MAT is creating from its own design. Then another surprising turn: Belgium-based global auto supplier Punch Group bought the PEC, with plans to work with GM on projects in progress until at least the end of 2021. Nothing changes as far as MAT is concerned, except perhaps a chance for an even closer collaboration with Punch Turin.