2012 Cadillac Cts V Coupe 6.2l V8 556 Hp - Black on 2040-cars

Auto blog

GM recalls select Tahoes, Yukons, Escalades for rear driveshaft issue

GM is recalling a number of its full-size SUVs due to an issue with the rear driveshaft assembly that could ultimately result in driveshaft failure. The actual number of total vehicles involved in the recall is small at just 1,789, but it’s spread out across the entire 2021 model year full-size GM vehicle lineup. That means a small number of every model is being recalled, including the Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL and the Cadillac Escalade and Escalade ESV. GM traced the issue back to certain driveshaft assemblies with ball bearings that were not properly heat treated. If theyÂ’re not properly heat treated, GM says that the balls may deform over time, causing noise and vibration. Continue to drive in this condition, and GM says the affected joint in the driveshaft assembly could seize, causing loss of drive power. However, the problem wonÂ’t present itself all at once, as GM says there will be a gradual increase of noises and vibrations before total failure. For those few owners with affected vehicles, GM says that it will replace the left and right rear driveshaft assemblies with properly-built units. Per usual with recalls, this will be done at your local dealership at no cost to the owner. If you have one of the recalled SUVs, expect to be notified mid-March. Related video:

Here's how Cadillac made its Magnetic Ride Control suspension quicker and smarter

Bugatti makes the world's fastest car, but Cadillac claims it has developed the world's fastest suspension. Its fourth-generation Magnetic Ride Control technology receives hardware and software tweaks to deliver a more comfortable ride and sharper handling. It's offered on some variants of the CT4, CT5 and the Escalade. Introduced in 2002 on the Seville STS, this self-adjusting suspension is not as complicated as it might sound. It relies primarily on electromagnets that emit a magnetic field, and a magnetorheological fluid whose viscosity changes depending on the strength of the magnetic force. Sensors scan the road up to 1,000 times per second and send the information they gather to the electromagnets, which then alter their magnetic field as needed to modify the fluid's viscosity. The fluid is in the shocks, so making it thicker returns a firmer ride, and vice versa. In simpler terms, Magnetic Ride Control leverages chemistry and physics to make the ride sporty, comfortable, or somewhere in between -- all in the blink of an eye. By reacting to the changing magnetic field, the fluid-filled shocks filter out road imperfections and maximize tire contact with the road to deliver more precise handling. Cadillac began developing the fourth-generation system by improving the hardware. The in-wheel accelerometers are more accurate than before, the inertial measurement unit is more precise, and the damper fluid formula was changed for quicker response times and a smoother ride. Engineers then turned their attention to the system's software. They notably gave the sensors the ability to process a wider selection of input and output signals, which translates to a wider spread between comfort and sport. And, they made the response time up to 45-percent quicker. All told, the fourth-generation Magnetic Ride Control technology performs better under heavy braking and hard cornering, it delivers more consistent performance, and it reads the road more accurately. Cadillac proudly notes these are the most comprehensive updates it has made to the system in nearly two decades. Magnetic Ride Control comes standard on the 2021 CT4-V and the 2021 CT5-V, and it's bundled into the CT5's V Performance package, which also includes a mechanical limited-slip differential. It's also standard on the Sport and Platinum variants of the 2021 Escalade, and it's part of the Premium Luxury trim's Performance package.

GM adds 1,200 jobs at Detroit-Hamtramck plant

General Motors is making a big move at its Hamtramck, MI, factory, announcing it will add a second shift and hire over 1,200 workers within the next several months. It's expected that by early 2016, the factory will employ over 2,800 workers to build the Chevrolet Volt, Impala, Malibu, Cadillac ELR, and by early next year, the new CT6. According to GM Hamtramck spokesperson Courtney Zemke, 40 of the 1,200 positions are for salaried employees, while the remainder will be hourly positions. As for where these employees will go, positions are being made available across the factory, so GM isn't focusing on any particular area for its new hires. It's a similar story behind the hiring surge itself. GM said in its press release that the "second shift is necessary to meet forecasted market demand," a position Zemke reiterated. It's a matter of demand across the plant's portfolio, rather than any one particular product seriously outstripping supply. Naturally, the United Auto Workers is happy with the move. "The workforce at Detroit-Hamtramck is second to none," UAW Local 22 Shop Chairman Don LaForest said in the attached release. "We appreciate the opportunity to expand our UAW-GM family." Hiring is going on now, with the second shift slated to get underway in early 2016. GM's Detroit-Hamtramck Assembly to Add Second Shift and More Than 1,200 Jobs Plant will nearly double its workforce by early 2016 2015-10-22 DETROIT – General Motors is nearly doubling its workforce at Detroit-Hamtramck Assembly by adding a second shift and more than 1,200 hourly and salaried jobs. The addition of a second shift will increase the plant's workforce to approximately 2,800 people when hiring is completed. The second shift is necessary to meet forecasted market demand for the five cars produced at Detroit-Hamtramck. "This is the result of the award-winning vehicles Detroit-Hamtramck produces and the confidence GM has in our team to build world-class quality for our customers," said Plant Manager Gary West. Second shift hiring is underway, and the shift is scheduled to begin operations in early 2016. "The workforce at Detroit-Hamtramck is second to none," said UAW Local 22 Shop Chairman Don LaForest. "We appreciate the opportunity to expand our UAW-GM family." The 4.1 million-square-foot Detroit-Hamtramck Assembly opened in 1985. GM has invested $1 billion in the plant over the last six years, making it one of the company's most-agile manufacturing facilities in North America.