2010 Cadillac Cts 3.6l Premium Sedan Pano Roof Nav 39k! Texas Direct Auto on 2040-cars

Auto blog

GM recalling 117,000 sedans, crossovers, SUVs, pickups and vans

General Motors has issued a stop-sale to dealers and has notified the National Highway Transportation Safety Administration of its intention to recall 117,000 vehicles in the United States, Canada and Mexico. Of those vehicles, only 4,500 are at dealerships.
The affected vehicles include the Cadillac CTS and Chevrolet Impala sedans, fullsize SUVs (Cadillac Escalade, Chevy Tahoe and Suburban and GMC Yukon and Yukon XL), Lambda-platform crossovers (Chevy Traverse, Buick Enclave and GMC Acadia), heavy-duty pickups (Chevy Silverado HD and GMC Sierra HD) and fullsize vans (Chevy Express and GMC Savana). The sedans and body-on-frame SUVs include model years 2013 and 2014, while the CUVs, heavy-duty pickups and vans are limited to MY2014.
GM confirmed the recall to Autoblog via an emailed statement (which we've included below). According to the statement, the issue at hand in what is the company's 69th recall of 2014 covers the chassis-control module. Automotive News is reporting that a problem in the chassis-control system could cause a short in the module, which could cause the engine to stall or fail to start. The fault could also affect the trailer-brake control, provided it's equipped.

GM recalls select Tahoes, Yukons, Escalades for rear driveshaft issue

GM is recalling a number of its full-size SUVs due to an issue with the rear driveshaft assembly that could ultimately result in driveshaft failure. The actual number of total vehicles involved in the recall is small at just 1,789, but it’s spread out across the entire 2021 model year full-size GM vehicle lineup. That means a small number of every model is being recalled, including the Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL and the Cadillac Escalade and Escalade ESV. GM traced the issue back to certain driveshaft assemblies with ball bearings that were not properly heat treated. If theyÂ’re not properly heat treated, GM says that the balls may deform over time, causing noise and vibration. Continue to drive in this condition, and GM says the affected joint in the driveshaft assembly could seize, causing loss of drive power. However, the problem wonÂ’t present itself all at once, as GM says there will be a gradual increase of noises and vibrations before total failure. For those few owners with affected vehicles, GM says that it will replace the left and right rear driveshaft assemblies with properly-built units. Per usual with recalls, this will be done at your local dealership at no cost to the owner. If you have one of the recalled SUVs, expect to be notified mid-March. Related video:

2020 Cadillac CT4 spied completely undisguised for the first time

A few weeks ago, Cadillac gave us our first look at its new small luxury sports sedan in the form of the CT4-V. This was a bit unusual considering the company hadn't shown us the regular one yet, and the reveal is still off in the not-too-distant future. But we were lucky enough to catch a normal 2020 Cadillac CT4 parked at a local gas station completely and totally undisguised. Based on what we know about other recent Cadillacs and their trim and design, this CT4 is probably a Luxury or Premium Luxury trim, since it has plenty of bright chrome and red taillights instead of dark gray ones. The differences from the CT4-V are subtle. The mesh grilles of the V are swapped for a main grille studded with small Cadillac badge shapes and the lower grille has simple slats. The little air intakes by the lower sections of the running lights are smaller than the ones on the V. This car also lacks the V's side skirts and wider canards on the edges of the front bumper. There doesn't appear to be a rear spoiler either. While we've had a good look at the exterior of the CT4, we'll have to wait until the car's full reveal later this year to know what's under the skin. We do know that it will continue to use the Alpha platform shared with the CT5, Camaro and the old ATS and CTS. We suspect the base engine will be the same 2.0-liter turbocharged inline-4 from the CT5, which makes 237 horsepower and 258 pound-feet of torque. Since the CT4-V uses a turbo 4-cylinder that makes 320 horsepower and 369 horsepower, there might not be a V6 option for the regular CT4. The CT5's twin-turbo 3.0-liter V6 makes more power and torque, so that's out, and the old ATS's naturally aspirated V6 made 335 horsepower and 285 pound-feet of torque, which would be uncomfortably close the CT4-V's specs. But we could see a V6 of some sort in an even more potent V iteration of the CT4 later.