2009 Cadillac Cts V on 2040-cars

Auto blog

Cadillac gives ATS, CTS new V6 for 2016

Replacing the existing 3.6-liter V6 in the Cadillac ATS and CTS is... another 3.6-liter V6. But this one promises higher output, while consuming less fuel, and making less noise. Like the V8s in the CTS-V and Escalade, it's got cylinder-deactivation technology to cut it down to a four-pot under lighter loads, as well as automatic stop/start, and comes mated to an eight-speed automatic transmission. The new engine produces 335 horsepower and 284 pound-feet of torque. That's a modest improvement over the 321 hp and 275 lb-ft mustered by the unit it replaces. But it also delivers an approximate improvement of nine percent in fuel economy and eight percent in carbon emissions. That's what we'd call a win-win, even if it's a modest one. Of course, those ATS or CTS buyers attracted to higher efficiency will still likely go for the 2.5-liter inline-four or the 2.0-liter turbo four. And those more inclined towards performance will be tempted by the 3.6-liter twin-turbo V6 in the ATS-V or CTS Vsport – or the 6.2-liter supercharged V8 in the CTS-V, for that matter. But those customers looking for the best of both worlds will surely be pleased by the improvements the new atmospheric V6 and 8-speed gearbox bring to the table. Related Video: New Technologies Boost Efficiency for 2016 CYLINDER DEACTIVATION AND START/STOP SYSTEMS BEGIN PRODUCTION ON ATS AND CTS PRODUCT LINES 2015-10-09 Renowned for luxury and design, Cadillac has recently added dynamic driving performance to its list of attributes. Now as 2016 model year production begins, Cadillac adds new fuel-saving technologies. Active Fuel Management and Automatic Stop/Start technologies, and widespread use of a new 8-speed transmission, are combining to raise fuel economy ratings and reduce emissions in Cadillac's portfolio. Cadillac's all-new six cylinder engine contains Active Fuel Management, or cylinder deactivation, technology enabling it to seamlessly switch from six-cylinder to four-cylinder operation under certain light-load conditions, while maintaining excellent performance. The new 3.6-liter engine is part of the 2016 ATS and CTS product lines. Additionally, the Cadillac Escalade luxury SUV's V8 will shift to four-cylinder operation in many daily driving conditions, as will Cadillac's all-new high performance CTS-V sedan.

Cadillac's semi-autonomous Super Cruise pushed back to 2017

It looks like General Motors is discovering just how difficult it is to bring autonomous vehicle technology fit for public consumption to market. The company has pushed back the launch of its semi-autonomous Super Cruise technology by several months. Originally promised by CEO Mary Barra for a fall 2016 debut, Super Cruise was supposed to be offered first on the new CT6 sedan. Automotive News is reporting that won't be the case, following a statement from GM confirming that the new system would be pushed to sometime in 2017. At the very least, that's a several month delay. GM cited the need to get the system right and keep owners safe, which prevented a firm date for Super Cruise's debut. Product boss Mark Reuss was more blunt, though, telling AN, "It will come out when it is ready." Super Cruise would be one of the earliest examples of driverless tech to be put into public hands, following the introduction of Tesla's semi-autonomous AutoPilot system in 2015. Most other automakers experimenting with the autonomous vehicles don't foresee public sales until early in the next decade, including Toyota, Renault-Nissan, and Volvo. Before Barra suggested a 2016 debut, GM originally aimed to introduce its semi-autonomous system in 2020. Related Video:

GM recalls 55,000 trucks, SUVs for separating axles, fuel pump failures

General Motors issued four separate recalls covering eight of its truck and SUV models for issues related to fuel pump and half-shaft failure. In total, the four campaigns include more than 55,000 vehicles spread out over three brands and six model years, but they've sorted themselves neatly into two categories. Let's dive in.  Axle separation Four models are being recalled for potential axle separation: The 2023 Cadillac XT5, 2023 GMC Acadia, 2023 Chevy Blazer and 2023 Chevy Traverse. The number of units affected is incredibly small (10 units each times two recalls, for a total potential population of just 20 cars). In each case, a small number left the factory with half-shaft assemblies that may have been missing the retention rings that keep them in place, possibly allowing the axles to separate or eject from the transmission. In the case of the XT5 and Acadia, it's the right-side axle assembly; Chevy dealers, however, will have to check the left side.  Fuel pump failure Again, we have multiple vehicles being recalled for similar issues, but in this case they're a bit more distinct. The first of these recalls covers the 2021-2022 Chevy Equinox and 2022 GMC Terrain. GM says a supplier-initiated change may have led to fuel pumps shipping with inadequate clearances to allow for the prescribed flow of fuel, meaning the pump could starve the engine. Customers experiencing the issue may see a check engine light and experience engine hesitation. In some cases, the cars may not start at all. Chevy and GMC will replace the units in question with correctly specified pumps.  The second recall covers a fairly specific cross-section of GM's HD truck lines. 2017-2019 Silverado and Sierra HD trucks sold with the diesel engine and a dual-tank configuration may have shipped with a rear fuel pump that is susceptible to fouling by debris, preventing fuel from properly transferring to the front tank, or, in extreme cases, resulting in a collapse of the rear tank. This issue can lead to inaccurate/erratic fuel tank readings, engine hesitation, a check-engine light or failure to start.  In both cases, GM will inspect and replace faulty units free of charge for customers. Expect notifications to be delivered by March.  Related video: Recalls Cadillac Chevrolet GMC Ownership Safety Truck SUV