2006 Cadillac Cts Base Sedan 4-door 3.6l on 2040-cars

Auto blog

2018 Cadillac XTS V-Sport Drivers' Notes Review | Cruise missile

The XTS is a standout in Cadillac's current lineup. It's a throwback to the automaker's cars of the '90s and early 2000s. It's big, comfy and packs a punch under the hood, but there's only a slight pretense of sportiness, despite the V-Sport moniker. If you want a Cadillac that handles, buy a CTS or ATS. Still, there's nothing wrong with being a big, slightly soft cruiser. Not everyone is out to conquer the Nurburgring. Some people just want comfy seats and a half-mile of wheelbase. Our tester is the range-topping Platinum V-Sport trim. At $73,040, it's not exactly cheap. That said, you do get a hell of a lot for your money. This car has heated and cooled massaging front seats with 22-way power adjustment, a heated steering wheel, heads-up display, the latest version of Cadillac's infotainment system, Bose surround sound, LED headlights and adaptive cruise control. That's not including all the V-Sport goodies like Brembo brakes, magnetic ride and a howling 3.6-liter twin-turbo V6. Senior Editor, Green, John Beltz Snyder — Hopping in the Cadillac XTS, the familiar surroundings created a certain set of expectations. Like judging a book by its cover, it's an easy trap to judge a Cadillac by its interior (they all feel the same to me). Some of what I expected, I got: a smooth ride, hearty pep, robust driver assist and fussy audio and HVAC controls. What surprised me was just how urgent this motor is. On paper, that should come as no surprise. The V-Sport's 3.6-liter twin-turbo V6, making 410 horsepower and 369 pound-feet of torque, is bound to pack a punch. You almost forget what that should feel like, though, until you put your right foot down. There's no lag, and despite the all-wheel drive, there's even a little torque steer. The lightness of the steering means it's no difficult task to account for it, though. Speaking of steering, I actually enjoyed bending this through tight corners. It's a breeze to saw the tiller back and forth, and the car communicates the interaction between the tires — especially up front — with the road. I'd like to take this Caddy to the track. Associate Editor Reese Counts: I liked this car way more than I thought I would. I was expecting a DTS or STS with a fresh face and a bit more punch. In a way, that's what this is, but I don't mean that as a knock. I don't need every car I drive to be able to put down hot laps. Sometimes I want something with soft seats (that massage!) and a big engine to get me home quickly.

Cadillac introducing V2V communications on 2017 CTS sedans

While Audi has introduced vehicle-to-infrastructure technology in select cars in select cities, Cadillac is focusing on vehicle-to-vehicle (V2V) communications, and it all starts with the CTS sedan. Starting this month, the company will be adding V2V equipment to 2017 models. The feature will be standard on cars in the US and Canada. These V2V devices will allow these new Cadillacs to communicate with each other up to 980 feet away. The cars will be able to transmit and receive information on speed, direction, and location. An example of how this data can be used is in detecting a car coming up a side street that could pose a possible collision risk. The cars will also be able to transmit data about brake use, hazard lights, and low traction situations for advance warning of hazards. The warnings can be displayed on the instrument panel and heads-up display. Currently, the system only communicates with other CTS sedans equipped with the technology. According to Chris Bonelli at Cadillac part of the reason is that the CTS will be the only car with the equipment on US roads at the moment, but it also isn't currently set to communicate with other cars if they were to be offered right away. However, he said that the company is absolutely willing to work with other companies to make the system compatible if or when other cars are offered with the technology. This V2V system also doesn't send data to any sort of network, instead only communicating with nearby cars. For the time being, this precludes the possibility of receiving road condition information from cars that are farther away. But as Cadillac points out, it should work under any conditions with no delay since it isn't dependent on information from a network. As far as security is concerned, Bonelli told us that the Cadillac system does have firewalls and other security measures to keep it protected from interference. He also said the cars don't store any data they receive. In addition, none of the data could be used to identify a particular person. The cars use a radio frequency set aside by the government for this use. The introduction of this technology also puts Cadillac well ahead of proposed legislation by the Department of Transportation. The organization wants this type of short-range V2V communications equipment to be a standard feature by 2023, believing the technology could prevent many injuries and deaths due to crashes. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging