2005 Cadillac Cts Base Sedan 4-door 3.6l Manual 6 Spd on 2040-cars

Auto blog

GM may kill 6 car models as it works with UAW to tackle sales slump

The president of the United Auto Workers union said on Thursday the union is talking with General Motors about the potential threat to plants and jobs from slumping U.S. car sales. GM's response will be more trucks and SUVs, and sources say at least six slow-selling car models may be killed off. "We are talking to (GM) right now about the products that they currently have" at underused car plants such as Hamtramck in Michigan and Lordstown in Ohio, and whether they might be replaced with newer, more popular vehicles such as crossovers, Dennis Williams told reporters. "We are tracking it (and) we are addressing it," Williams added. GM has cut shifts at several U.S. plants this year as inventories of unsold cars have ballooned. Industry analysts said more jobs could be at risk as the automaker wrestles with permanently shrinking production of small and midsized sedans. GM is reviewing whether to cancel at least six passenger cars in the U.S. market after 2020, including the Chevrolet Volt hybrid, which could be replaced in 2022 with a new gasoline-electric crossover model, Reuters has learned from people familiar with the plans. Other GM cars at risk include the Buick LaCrosse, Cadillac CT6, Cadillac XTS, Chevrolet Impala and Chevrolet Sonic, sources said. Some analysts have singled out GM's Hamtramck plant in Detroit as one of the most vulnerable because of plummeting car sales. The plant, which opened in 1985, builds four slow-selling models: Buick LaCrosse, Chevrolet Impala, Cadillac CT6 and Chevrolet Volt. In the first half, it built fewer than 35,000 cars, down 32 percent from the same period in 2016, according to suppliers familiar with GM's U.S. production schedule. The typical GM assembly plant builds 200,000-300,000 vehicles a year.COMING ATTRACTIONS: TRUCKS AND SUVS GM must "create some innovative new products" to replace slow-selling sedans "or start closing plants," said Sam Fiorani, vice president of AutoForecast Solutions. The auto maker already has begun to shift future production plans from cars to trucks, according to Morgan Stanley auto analyst John Murphy. He estimates that fewer than 10 percent of the new vehicle models that GM will introduce over the next four years will be passenger cars, with the rest divided among trucks, SUVs and crossovers. GM plans to add production of the new Cadillac XT4 crossover next year to its Malibu sedan plant in Fairfax, Kansas.

Cadillac to expand V-Series but discontinue CTS-V and ATS-V

Cadillac said Tuesday it will expand its V-Series performance sub-brand with the arrival of the CT6-V sedan in 2019 ( formerly known as the CT6 V-Sport), with plans to add high-performance variants across its portfolio. The flipside to that expansion is the sunsetting of its two existing V-Series performance cars, the ATS-V (both coupe and convertible) and CTS-V sedan. Two new unspecified sedans will slot below the CT6 in Cadillac's lineup, a spokesman said. The CT6-V will arrive next spring, roughly a year after it bowed at the New York auto show. It will feature Cadillac's new "Blackwing" V8, a twin-turbo engine that displaces 4.2 liters and produces an estimated 550 horsepower and 627 pound-feet of torque, sending it through GM's new 10-speed automatic transmission to drive all four wheels. A less-aggressive version of the engine will also appear in the CT6 Platinum model, offering 500 horsepower and 553 lb-ft of torque. "Beginning with the debut of the CTS-V Sedan in 2004, the V-Series sub-brand sparked new life into Cadillac," Mark Reuss, executive vice president and president of GM Global Automotive Group and Cadillac, said in a statement. "As a result of the overwhelming response the CT6 V-Sport received when revealed in early 2018, we've decided to formally make it a V-Series, signaling the expansion of V-Series." View 61 Photos A Cadillac spokesman tells Autoblog the 2019 model year will be the last for the ATS-V and CTS-V. The ATS-V is powered by a twin-turbo 3.6-liter V6 that's good for 464 hp and 445 lb-ft of torque, an increase of 262 hp and 173 lb-ft from the base, four-cylinder ATS, which is also set to go to pasture at the end of the 2018 model year. The CTS-V, meanwhile, boasts a 6.2-liter supercharged V8 under its carbon-fiber hood that puts out 640 horsepower and 630 pound-feet of torque, good for a 3.7-second 0-60 mph time and a top speed of 200 mph. In a Quick Spin review last year, Autoblog Editor-in-Chief Greg Migliore called the car "old-school muscle in an Esquire-approved suit. It's 'roids and cufflinks." As for what's next for an expanded V-Series, Cadillac has the new XT4 crossover, and already other companies are banking on performance versions of crossovers. Cadillac's also developing a less expensive luxury sports sedan called the CT5. It's also said to be planning a production version of the Escala concept starting in late 2021, so those could be possibilities.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging