1991 Allante Runs And Drives on 2040-cars

Auto blog

2016 Cadillac CT6 has arrived

We have known for a while that the 2015 New York Auto Show would mark the debut of Cadillac's latest flagship model. But after months of waiting as Caddy slowly revealed details, the 2016 Cadillac CT6 has finally arrived. The sedan is a technological tour de force for the brand and inaugurates a long list of new technologies. The CT6 will begin production at the Detroit-Hamtramck Assembly plant in late 2015 and will go on sale with three engine options. Caddy won't release final figures yet, but based on preliminary numbers, we know the base 2.0-liter turbocharged four-cylinder will make 265 horsepower. Stepping up to the newly revised 3.6-liter V6 will net buyers an estimated 335 hp, and finally there will be the 3.0-liter twin-turbo V6 with an output of around 400 hp. All of these engines will be mated to eight-speed automatic transmissions, and six-cylinder models will get standard all-wheel drive that will be able to constantly vary the power sent to the front wheels. Carrying those powertrains is the new, aluminum-intensive Omega architecture. In addition to the lightweight metal making up the platform, the entire exterior also uses it to provide an estimated curb weight of less than 3,700 pounds. The decision to shed mass makes the CT6 a featherweight in its class – for comparison, the lightest, six-cylinder Audi A8 weighs 4,365 pounds. The sedan rides on a 122.4-inch wheelbase and is 204 inches long. That makes the Cadillac about 1.3 inches shorter than the smallest BMW 7 Series, but the Caddy is projected to tip the scales at less than both the big Bimmer and even the 5 Series, too. Cadillac wants the CT6 to be a luxury sedan that drivers can enjoy. In addition to the low weight, there's an available Active Chassis System throughout the range with rear-wheel steering and Magnetic Ride Control. When combined with the all-wheel-drive system, it means every corner of the car is both driving and steering the vehicle. Inside, the CT6 offers a ton of tech and luxury. Drivers are held in massaging, leather seats, and rear passengers also get adjustable chairs that are heated and cooled. Quad-zone climate controls keep everyone comfortable. Plus, in addition to the 34-speaker Bose audio system and streaming rearview mirror, there are features like a 10.2-inch CUE infotainment system with a capacitive touchscreen and console-mounted touchpad. The display also shows a 360-degree view outside and can even record video when the security system is activated.

GM may kill 6 car models as it works with UAW to tackle sales slump

The president of the United Auto Workers union said on Thursday the union is talking with General Motors about the potential threat to plants and jobs from slumping U.S. car sales. GM's response will be more trucks and SUVs, and sources say at least six slow-selling car models may be killed off. "We are talking to (GM) right now about the products that they currently have" at underused car plants such as Hamtramck in Michigan and Lordstown in Ohio, and whether they might be replaced with newer, more popular vehicles such as crossovers, Dennis Williams told reporters. "We are tracking it (and) we are addressing it," Williams added. GM has cut shifts at several U.S. plants this year as inventories of unsold cars have ballooned. Industry analysts said more jobs could be at risk as the automaker wrestles with permanently shrinking production of small and midsized sedans. GM is reviewing whether to cancel at least six passenger cars in the U.S. market after 2020, including the Chevrolet Volt hybrid, which could be replaced in 2022 with a new gasoline-electric crossover model, Reuters has learned from people familiar with the plans. Other GM cars at risk include the Buick LaCrosse, Cadillac CT6, Cadillac XTS, Chevrolet Impala and Chevrolet Sonic, sources said. Some analysts have singled out GM's Hamtramck plant in Detroit as one of the most vulnerable because of plummeting car sales. The plant, which opened in 1985, builds four slow-selling models: Buick LaCrosse, Chevrolet Impala, Cadillac CT6 and Chevrolet Volt. In the first half, it built fewer than 35,000 cars, down 32 percent from the same period in 2016, according to suppliers familiar with GM's U.S. production schedule. The typical GM assembly plant builds 200,000-300,000 vehicles a year.COMING ATTRACTIONS: TRUCKS AND SUVS GM must "create some innovative new products" to replace slow-selling sedans "or start closing plants," said Sam Fiorani, vice president of AutoForecast Solutions. The auto maker already has begun to shift future production plans from cars to trucks, according to Morgan Stanley auto analyst John Murphy. He estimates that fewer than 10 percent of the new vehicle models that GM will introduce over the next four years will be passenger cars, with the rest divided among trucks, SUVs and crossovers. GM plans to add production of the new Cadillac XT4 crossover next year to its Malibu sedan plant in Fairfax, Kansas.

GM will likely build PHEV batteries in China soon

It's a big week for batteries. Friday, Tesla will hold a big event at its Gigafactory in Reno, NV. But even in Michigan, there are things happening on the electrified automotive front. This was proven when GM invited journalists to its Brownstown Battery Assembly Plant today, highlighting the six different battery packs it makes for nine vehicles around the world (plus a tenth, coming to Asia, that has not yet been announced). During our tour, we learned a few interesting tidbits that we thought readers would like to hear: The Cadillac CT6 plug-in hybrid launches in China this fall before coming to the US next year. GM builds the battery packs in Michigan and ships them to China for final assembly in the PHEV. For now, this is all fine for GM to qualify for China's incentives for building green cars in the country. But, as Bill Wallace, GM's director of global battery systems, told AutoblogGreen, this could change thanks to the country's 'Made in China 2025' plan. The situation is "evolving," he said, and it's a safe assumption that GM will need to build packs in China some day. For the CT6 PHEVs that will be sold in the US, the batteries will make a round trip, since GM will only build the plug-in version in China. As for the range of the CT6 PHEV, that hasn't been announced, but since China offers incentives for vehicles that get at least 50 kilometers (31 miles), that's a likely target (the US range (UPDATE: GM did announce an expected range for the CT6 PHEV in the US at the LA Auto Show last fall, saying it would "travel approximately 30 miles on a full electric charge"). The battery pack in the CT6 is also a clunky box-type thing, totally unlike the near-elegant T-shape used in the Volt. This despite the fact that the guts of the two packs are similar. Both have 192 li-ion cells and weigh almost the same, but GM tuned the CT6 pack for acceleration instead of range, the way it did with the Volt's pack. Still, the main reason the packs are different is because the CT6 is a rear-wheel drive vehicle, and the tunnel that the Volt's pack uses is occupied by the driveshaft. Despite the highly touted second-gen Chevy Volt going on sale last year, GM still has the capacity to build battery packs for the old, first-gen model. This is because the company is legally required to be able to provide replacement packs for warrantied vehicles (for up to 10 years), and the second-gen packs don't fit into the first-gen vehicles.