Convertible Skylark Special Financing Approval Guaranteed(o.a.c)(o.a.d)(o.a.v) on 2040-cars

Auto blog

New Takata problem results in recall of 414 GM vehicles

An airbag-inflator rupture discovered by Takata during testing has resulted in a new recall affecting 414 vehicles from General Motors, including 395 of them in the US. This latest campaign covers 2015 model-year examples of the Buick LaCrosse, Cadillac XTS, Chevrolet Camaro, Equinox, Malibu, and GMC Terrain. There are no reported breaks in any of these vehicles on the road, and the company estimates only one percent of them actually have the faulty parts. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), one side-airbag inflator failed a cold test at -40 Fahrenheit "releasing high pressure gas and propelling the separated components apart." The supplier told GM about the failure the next day. In these vehicles, the safety device might not only burst but the bag could inflate incorrectly, as well. GM and Takata say that a cause is not yet known, but they are "conducting an investigation." GM will begin notifying affected owners via overnight mail on Oct. 19. Dealers will replace the side airbag modules on all of the affected vehicles with new components outside of the suspect lot. All of the removed parts will also be collected for further study. Takata's faulty front airbag inflators have resulted in a serious scandal for the supplier. Initial figures indicated 34 million US vehicles are need of repair, though more recent figures have knocked that down to 23.4 million bad parts in 19.2 million automobiles. GM was already among the dozen automakers with models to fix, and some of its pickups were affected, along with the Saab 9-2X and Pontiac Vibe. GM Statement: General Motors is recalling 395 cars and crossovers in the U.S. because one of the front seat side air bags inflators may be defective. In the event of a deployment, the air bag's inflator may rupture and the air bag may not properly inflate. The rupture could cause metal fragments to strike the vehicle occupants, potentially resulting in serious injury or death. GM is unaware of any incidents involving vehicles with these components, which were part of a lot in which one inflator failed acceptance testing at the supplier. Dealers will replace the side air bag module or modules in affected vehicles. Including Canada, Mexico and exports, the total population of the recall is 414, GM estimates 1 percent of the recalled vehicles may have the defect.

2021 Buick Envision's bold design means small space gains, a few big losses

So far, every preview we've had of the 2021 Buick Envision compels us to believe that it isn't playing in the same league as the current Envision, nor is it playing the same sport. The chiseled, crisp exterior is matched by an interior that, in pictures at least, sends a genuine premium message. GM Authority got early intel on dimensions for the new crossover, the numbers showing that the only close relationship between the current and the new Envision is in size. According to GMA, the 2021 Buick will be 185.5 inches long on a wheelbase of 109.4 inches, it'll stand 74.1 inches wide without mirrors, and 64.6 inches tall. Front and rear tracks are matched at 63.3 inches. That makes the new version 1.8 inches longer than the current five-seater, with a wheelbase stretched 0.9 inches, while width is 1.7 inches wider but overall height is 2.2 inches lower. The track has been expanded by 1.3 inches front and back. The four-trim lineup will be base, Preferred, Essence and Avenir. Buick's website pegs the current Envision at the single curb weight of 3,755 pounds. GMA writes that the new car comes in at 3,685 pounds in base form, or 3,932 in top Avenir trim. Those could all represent weights for front-wheel-drive models. AWD will be optional on all but the base 2021 Envision. The price for edgier design is a tiny cut in interior room in front. In the coming crossover, front headroom shrinks 0.4 inches to 39.6 inches, front legroom shrinks by 0.5 inches, front shoulder room goes down by 0.3 inches. Front hip room gains 0.7 inches, however, Occupants in the row behind get a tiny bit more space in two dimensions, rear headroom going up 0.4 inches, rear legroom by 1.8 inches, Rear shoulder room gets shaved 0.7 inches, and those haunches on the 2021 model take a bite out of rear hip room, that spec dropping by 5.7 inches to 47.4.  Cargo room sees a slight dip, too, there being 25.2 cubic feet of space behind the second-row of seats compared to 26.9 feet available now. The gap grows with the rear seats down, the coming Envision able to swallow 52.7 cubic feet behind the front row, the current Envision managing 60 cubic feet.  When product starts showing up on dealer lots, we're to expect a 2.0-liter turbocharged four-cylinder under the hood with 230 horsepower and 258 pound-feet of torque, shifting through GM's nine-speed automatic transmission. GMA believes pricing will start around $34,000, which would be about $500 more than the current Envision.    

GM recalling over 243,000 crossovers over possible seat belt defect

2010 Buick Enclave - Click above for high-res image gallery
The summer of 2010's recall hit parade continues unabated today, with General Motors having just announced that it is asking 243,403 owners of its 2009-2010 Lambda crossovers to bring their three-row haulers in for inspection. The culprit? Second-row seat belts in select Buick Enclave, Chevrolet Traverse, GMC Acadia, and Saturn Outlook CUVs have "failed to perform properly in a crash."
According to GM, a second-row seat-side trim piece is to blame, as it can impede the upward rotation of the buckle after the seat is folded flat. As a result, if the buckle makes contact with the seat frame, cosmetic damage can occur, potentially requiring additional force to operate the buckle properly. So far, no great shakes, but in the process of applying that additional force, the occupant may push the buckle cover down to the strap, potentially revealing and depressing the red release button. As a result of this, the belt may not latch, or in certain cases, it may actually appear to be latched when, in fact, it isn't.