66 Buick Skylark Gs on 2040-cars

Auto blog

2018 Buick Enclave: How engineers made it larger, lighter, more sophisticated

Buick used the unveiling of the 2018 Enclave at the New York Auto Show to introduce its new range-topping Avenir sub-brand to the world. With fancier interior finishes and exterior details, it's Buick's latest effort to make itself a proper luxury brand (or perhaps re-establish itself as such). However, lost in the Avenir song and dance is the fact that the 2018 Buick Enclave is a (very) long-awaited all-new model regardless of the trim level one selects. Like the Chevrolet Traverse upon which it is based, the new Enclave is bigger than the vehicle it replaces but considerably lighter, by about 400 pounds. "We told every engineer, 'get your job done, but then take the weight out,'" said engineer Rick Spina as we hovered next to his larger yet lighter creation. His team therefore set about taking a little bit of weight out from just about everywhere, from using additional aluminum in the suspension to varying the thickness of the frame (thicker in places that needed to be stronger, thinner and therefore lighter in places that didn't). Only about 100 pounds came out of the body with the rest coming from elsewhere. Not only will the reduced weight improve fuel economy (Buick-estimated at 19 mpg combined with FWD versus 18 for the 2017 model) and presumably the old Enclave's rather ponderous handling, but it should only make things easier for the new powertrain: General Motors' now-familiar 3.6-liter V6 and its latest nine-speed automatic. With 302 horsepower and 260 pound-feet of torque, Buick says the new engine will need 7.2 seconds to reach 60 mph with FWD or 7.5 seconds with AWD. That's a second quicker than before. Besides acceleration, towing is also bumped up by 500 pounds to 5,000. For those models with all-wheel drive, the Enclave has the same basic system featured on range-topping versions of the Buick LaCrosse. Besides power being sent front and rear, it can also differ from right to left in the back, although Spina is quick to point out that capability is for traction-enhancing purposes rather than sporty, handling-enhancing torque-vectoring ones. Buick owners already appreciated the Enclave for its quietness so the engineers decided to take it that much further. This included altering the exhaust, improving body sealing (there are triple door seals), including active sound deadening and utilizing advanced materials that absorb sound as opposed to simply being thick, dense and heavy enough to keep it out.

2021 Buick Envision order guide shows $32,995 base price

Based on an early dealer guide Cars Direct got its hands on, the 2021 Buick Envision will bring more to the market than handsome new design inside and out. The 2020 Envision in 1SV and Preferred trims starts at $33,500 plus a $1,195 destination charge, totaling $34,695. The dealer guide shows the 2021 Envision Preferred starting at $32,995 after destination, a $1,700 cut compared to this year's model. The 1SV was also listed in the guide but didn't get a price. A Buick spokesperson confirmed to Cars Direct that the Preferred trim will be the new entry-level, so it appears the 1SV could go away. The two trims are equipped the same as standard, the difference being that Preferred opens up the options menu to features like the Active Package and a powered panoramic moonroof. That pricing puts the 2021 Envision thousands of dollars under of its luxury competitors like the Acura RDX, Audi Q5, Lexus NX, and Lincoln Corsair. The price of the middle Essence trim doesn't change, at $36,995 after destination.   The current Premium trim will be replaced by the Avenir trim. At present, the Premium trim only comes in all-wheel drive, which Buick has changed for the 2021 model year. A 2021 Envision Avenir with front-wheel drive will start at $41,395, which is $500 less than a 2020 Envision Premium with all-wheel drive. Adding power to the rear axle adds $1,800 to the price, the Envision Avenir AWD the most expensive model at $43,195. That's a $1,600 cut compared to the 2020 Envision Premium AWD. The only engine on offer will be a 2.0-liter turbocharged four-cylinder with 230 horsepower and 258 pound-feet of torque, the same engine in the 2021 Envision's E2 platform-mate, the Cadillac XT4. That output falls between the two engines that can be had on the 2020 Envision, either the base 2.5-liter four with 197 hp and 192 lb-ft, or an optional 2.0-liter turbo four with 252 hp and 295 lb-ft.  Related Video:

GM expanding Lansing Lambda CUV plant

Considering that crossovers are a rapidly growing portion of the US auto market, it's not surprising to hear that General Motors is preparing to build even more of them. The company is investing $63 million to expand its Lansing Delta Township Assembly plant that builds Lambda platform CUVs like the Chevrolet Traverse, GMC Acadia and Buick Enclave.
According to GM, the expansion will add roughly 263,000 extra square feet of space to the plant. Of that, 181,000 square feet will be for an updated body shop with cutting-edge robots. There will also be 54,000 square feet of additional room in the paint shop and 28,000 square feet of more area for general assembly.
GM isn't saying as much, but there is the possibility that this extra space could allow for additional models produced at the factory. Cadillac reportedly dropped plans to build a three-row SUV on the Lambda platform earlier this year, however, dealers for the luxury brand were recently pitched the possibility of adding large and small CUVs, an ATS convertible or a sedan below the ATS.