1996 Buick Supercharged Riviera V6 3800 Coupe Classic Drive It Home Look Ny on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

Junkyard Gem: 1990 Buick Reatta Coupe

During the 1980s, General Motors worked hard to woo back American car shoppers who had defected to European luxury brands. Swanky interiors, futuristic electronics and Europe-influenced styling found their way into quite a few GM models during the second half of the decade. Pontiac had the 6000 STE, Oldsmobile offered the Toronado Trofeo, Cadillac sold the Turin-Hamtramck-built Allante, and Buick produced the sporty Reatta two-seater. Just under 22,000 Reattas were built during the 1988 through 1991 model years, and today's Junkyard Find is the fifth example I've found during my junkyard travels. The Reatta was the most expensive 1990 Buick, priced at $28,335 for the coupe and $34,995 for the convertible (or about $65,895 and $81,380 in inflation-adjusted 2022 dollars).  For that kind of money, American car shoppers in 1990 could get a BMW 325i in coupe or convertible form for $24,650 or $33,850. They could get a Saab 900 Turbo convertible for $32,995 or an Audi Coupe Quattro for $29,750. Each of those European competitors had sophisticated overhead-cam engines and grippy suspensions, but the Reatta was built on a shortened version of the chassis that went under the Barcalounger-esque Buick Riviera and its engine was the old-timey pushrod Buick V6. The 3.8-liter Buick V6 had been made quite reliable and acceptably smooth by the time this car was built, and it made 165 horsepower (just three fewer than the BMW 325i), but Buick salesmen didn't have much to brag about when showing this engine compartment to a 35-year-old youngster who had just driven a Saab 900 Turbo. The antiquated engine was problem enough, but the lack of a manual transmission served to chase off additional potential buyers. A four-speed automatic was mandatory in every Reatta. Just in case some traditional (i.e. Greatest Generation members) Buick customers might consider this glamorous two-seater, Buick scared them off with the Reatta's video-game-style digital dash and its way-ahead-of-its-time Graphics Control Center touchscreen interface. You can't win! The Graphics Control Center hardware has been grabbed from this dash (the components also fit optioned-up Rivieras and Trofeos of the same era, so junkyard shoppers pull them for resale). Naturally, a Reatta owner would want a hardwired car phone. If you really wanted to be cool in the early 1990s, you bought a Chrysler product with the amazing VisorPhone.

GM recalls 2022 Cadillac XT5, XT6 and GMC Acadia for suspension issue

General Motors is recalling a relatively small number of 2022 Cadillac and GMC crossovers to address the potential for missing or loose rear suspension hardware that is being blamed on a lapse in quality control at the company's Spring Hill facility. The campaign covers 223 examples of the Cadillac XT5, 159 examples of the Cadillac XT6 and 354 examples of the GMC Acadia. "General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2022 model year Cadillac XT5, XT6, and GMC Acadia vehicles," GM said in its defect report. "A fastener in the left-rear suspension toe link in some of these vehicles may not have been fully tightened during suspension assembly. After an assembly process was moved to a new area, error proofing equipment was not initially set up properly, which allowed a window where the operator might miss tightening certain fasteners without the failure being flagged." The issue was discovered by a quality engineer at the Spring Hill facility in March of this year, at which point GM conducted an audit to determine which and how many vehicles may have left the factory with improperly torqued or missing fasteners, narrowing down the recall population to the above 736 vehicles. No incidents associated with the defect have been reported in customer vehicles.  Related video: Recalls Buick Cadillac GM Ownership Safety