1966 Buick Riviera on 2040-cars

Auto blog

Kia Telluride vs Buick Enclave Luggage Test | What actually fits behind that third row?

So, you want to buy a three-row crossover. Before plunking down $40,000 on a new sport utility vehicle, might we dissuade you with the prospect of minivan ownership? The Pacifica Hybrid, perhaps ... no? Fine. Good thing crossovers (especially the Telluride and comparable Palisade) are so nice to drive these days. We’ll assume you want the big three-row crossover, as you intend to seat folks in all three rows. Unfortunately, raising that third row reduces the luggage area from cavernous to crawl space. ItÂ’s rather devastating from a pure numbers perspective to the two models we have today. The 2019 Buick Enclave goes from a monstrous 58 cubic-feet with the second-row in place down to 23.6 cubic-feet (which along with the nearly identical 2020 Chevrolet Traverse is still best-in-class). Meanwhile, the 2020 Kia Telluride takes a similar hit, going from 46 cubic-feet down to 21 cubic-feet. Just looking at the numbers, it would seem that the EnclaveÂ’s big advantage all but disappears with the third row up, boasting just 2.6 cubic-feet of storage more than the Telluride. But as West Coast Editor James Riswick has discovered in the numerous luggage tests he's conducted, the numbers don't always tell the whole story. Let's see how the Enclave and Telluride compare when you actually put things inside.  Boom. The Enclave swallows all of the test luggage we have for it without any fuss. The distance between the back of the seats to the hatch opening is enough to fit our full-size suitcase horizontally, making it easy to stack every other bag around it. It even fits below the seatbacks, so the driver will have an uninhibited view out the rear of the vehicle.  At our Michigan HQ, our test luggage consists of the following pieces: 28-inch upright suitcase, 24-inch upright suitcase, 19-inch upright suitcase, two small tote bags and one backpack. ItÂ’s likely enough luggage for a quick weekend getaway with the family, given there are no strollers involved. As we attempted to pack it all into the Telluride, weÂ’re glad we didnÂ’t have anything else. The loss of 2.6 cubic-feet of space was indeed felt much harder than what it looks like on paper. We knew we were in trouble when the 28-inch suitcase didnÂ’t fit along the floor as it did so neatly in the Enclave. We were forced to stack it up next to the rear seats, which left it sitting rather tall back there. As a result, the other suitcases didnÂ’t have a neat or convenient place to go.

2021 Buick Envision order guide shows $32,995 base price

Based on an early dealer guide Cars Direct got its hands on, the 2021 Buick Envision will bring more to the market than handsome new design inside and out. The 2020 Envision in 1SV and Preferred trims starts at $33,500 plus a $1,195 destination charge, totaling $34,695. The dealer guide shows the 2021 Envision Preferred starting at $32,995 after destination, a $1,700 cut compared to this year's model. The 1SV was also listed in the guide but didn't get a price. A Buick spokesperson confirmed to Cars Direct that the Preferred trim will be the new entry-level, so it appears the 1SV could go away. The two trims are equipped the same as standard, the difference being that Preferred opens up the options menu to features like the Active Package and a powered panoramic moonroof. That pricing puts the 2021 Envision thousands of dollars under of its luxury competitors like the Acura RDX, Audi Q5, Lexus NX, and Lincoln Corsair. The price of the middle Essence trim doesn't change, at $36,995 after destination.   The current Premium trim will be replaced by the Avenir trim. At present, the Premium trim only comes in all-wheel drive, which Buick has changed for the 2021 model year. A 2021 Envision Avenir with front-wheel drive will start at $41,395, which is $500 less than a 2020 Envision Premium with all-wheel drive. Adding power to the rear axle adds $1,800 to the price, the Envision Avenir AWD the most expensive model at $43,195. That's a $1,600 cut compared to the 2020 Envision Premium AWD. The only engine on offer will be a 2.0-liter turbocharged four-cylinder with 230 horsepower and 258 pound-feet of torque, the same engine in the 2021 Envision's E2 platform-mate, the Cadillac XT4. That output falls between the two engines that can be had on the 2020 Envision, either the base 2.5-liter four with 197 hp and 192 lb-ft, or an optional 2.0-liter turbo four with 252 hp and 295 lb-ft.  Related Video:

Junkyard Gem: 1986 Buick Riviera

The Buick Riviera personal luxury coupe attained monstrous proportions by the middle 1970s, scaling in at well over 4,500 pounds by 1976. After spending 1977 and 1978 as sibling to the Chevy Caprice, the Riviera then moved to the front-wheel-drive platform used by the Cadillac Eldorado and Oldsmobile Toronado, staying there through the 1985 model year. The Riviera world became a lot more interesting for the 1986 model year, when a smaller and more sophisticated generation hit showrooms with curvier lines and electronic gadgetry straight out of science fiction. Today's Junkyard Gem is one of those cars, found in a self-service boneyard in Phoenix, Arizona. What makes this car such a fascinating bit of automotive history is this dash-mounted touchscreen interface, known as the Graphic Control Center. The 1986 Riviera was the first GM vehicle to get the GCC, which means it was the first production car in history with a factory-installed touchscreen display. This system became available in the Buick Reatta and the Oldsmobile Toronado a few years later.  The GCC used a cathode-ray tube screen sourced from an ATM manufacturer, which ran on 120VAC power and required an inverter and dangerous high-voltage wiring inside the dash. It was used to operate the HVAC, the radio and the trip computer, as well as to display operating and diagnostic information. The system used numerous bulky components in addition to the dash screen; I've extracted a couple of complete sets of GCC components over the years and plan to build them into a junkyard-parts boombox. As it turned out, the senior-citizen-heavy demographic of Buick shoppers didn't feel great enthusiasm for the GCC and there wasn't a huge sales payoff for this revolutionary technology. That didn't stop GM from introducing the first mass-produced cars with head-up displays a couple of years later. The running gear wasn't quite as sophisticated as the GCC. The 1986-1993 Rivieras got old-fashioned 3.8-liter Buick V6s under their hoods; the one in this car was rated at 140 horsepower and 200 pound-feet. If you wanted a manual transmission in your '86 Rivvie, you were out of luck. A four-speed automatic was mandatory equipment. Note the unusual face-loading cassette deck in front of the shifter; the AM/FM radio was a remote-controlled unit living inside the center console. The MSRP for this car was $19,831, or about $55,691 in 2023 dollars.