1963 Buick Riviera 2dr 401 V8 on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

2024 Buick Envista revealed as a good-looking, quite-affordable crossover 'coupe'

Buick has a new entry-point for the brand, the 2024 Envista. The new model shares much with its mechanical twin, the Chevy Trax, including a very low base price of less than $24,000. But as you can see, it skips the traditional crossover shape for a more coupe-like roofline. Unsurprisingly, the Envista gets the Wildcat EV design language with a big, frowning grille and scowling LED lights. In profile, it looks longer and lower than the Encore GX, but not just because of the roofline. It's less bulky around the wheel arches, and the ends aren't so blunt and bulbous. Three trims are available for the Envista, and they have some design distinctions. The base trim is the Preferred, and then there are the ST and Avenir trims. The ST is pictured at top with its dark grille and black-painted fender flares, mirror caps and 18-inch wheels. The Avenir (pictured below) gets body-color trim and a bright metal grille and matching 19-inch wheels. 2024 Buick Envista Avenir View 9 Photos Inside, the Envista looks very much like the Encore GX. The dash design is nearly the same, save for slightly different upholstered panels and screen surrounds. It has the same 8-inch instrument display and 11-inch infotainment touchscreen. Trims get different topstitching, with the ST getting swoopy blue stitches, and the Avenir getting more toned-down, more geometric gray stitching. Cargo space comes in at 20.7 cubic feet behind the rear seats, and 42 cubes with them folded. The Envista uses the Trax platform, and that means it comes with only one powertrain: a turbocharged 1.2-liter three-cylinder. It makes 136 horsepower and 162 pound-feet of torque. The only transmission is a six-speed automatic, and it only sends power to the front wheels. Two suspension setups are available, one of which is a simple torsion beam, and the second adds a Watts linkage. The latter comes on all Avenirs with 19-inch wheels. As with Trax, pricing is very affordable, with the base Preferred starting at $23,495, including destination fee. The ST rises to $25,195, and the Avenir tops the range at $29,695. That puts about $3,000 of space between the Envista and the Encore GX at every trim level. Orders open for the Envista this summer. Related video:

GM applies for 'Enspire' trademark for the second time

When we wrote about the Buick Enspire concept debut in China earlier this year, we said "we wouldn't be surprised to see either an all-new crossover, or a redesigned current model, sporting the designs seen on this concept." Now it appears General Motors might be planning to go with Option A. GM Authority discovered a trademark application for the name "Enspire," to be applied to "Automobiles, excluding motor homes." This is the second time GM filed for the name, the first being in 2015. As always, applications don't mean certainties. However, we know Buick has a range of new models in development, it's losing the LaCrosse sedan and its crossovers sell quite well. If there's to be a new vehicle called Enspire, it shouldn't be hard to guess what kind it would be. GMA's previous investigations picked up clues that there'll be two new Buick crossovers, one about the size of the China-sourced Envision and sitting on the E2 platform that supports the Cadillac XT4, Chevrolet Malibu, and Buick Regal. Based on data in an IHS Automotive document, the site said the putative Enspire's platform code is E2UB, the U for utility vehicle, the B for Buick. The other crossover would sit above an Envision, below the Enclave, on the short-wheelbase C1 platform employed by the Cadillac XT5. We can probably take the Enspire concept's design cues as a preview of the future, if not its electric drivetrain. Designers carved the wide, formidable stance with curved and elongated versions of traditional Buick brand cues, such as the grille crossbar stretching into the headlights. A futuristic, art-filled and screen-heavy interior contrasts with genuine wood, and is probably best not to look at because Buick couldn't bring anything like it to production. The electric drivetrain included a 550-horsepower electric motor and enough battery to power a 370-mile range. Those figures seem a little outlandish given the potential price tag and the Buick badge. Besides, GM has other plans for a dedicated EV powertrain in development that should bow around 2021, and a Buick EV based on the Chevrolet Bolt's BEV II architecture. As such, a conventional powertrain seems more likely for an Enspire crossover, at least initially. The same IHS Automotive document said the E2UB vehicle would go into production in Shanghai in late 2019.