4dr Sdn Cxl 3.0l Fwd Sedan Automatic Gasoline 3.0l V6 Dir Dohc 24v Carbon Black on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

Junkyard Gem: 1986 Buick Riviera

The Buick Riviera personal luxury coupe attained monstrous proportions by the middle 1970s, scaling in at well over 4,500 pounds by 1976. After spending 1977 and 1978 as sibling to the Chevy Caprice, the Riviera then moved to the front-wheel-drive platform used by the Cadillac Eldorado and Oldsmobile Toronado, staying there through the 1985 model year. The Riviera world became a lot more interesting for the 1986 model year, when a smaller and more sophisticated generation hit showrooms with curvier lines and electronic gadgetry straight out of science fiction. Today's Junkyard Gem is one of those cars, found in a self-service boneyard in Phoenix, Arizona. What makes this car such a fascinating bit of automotive history is this dash-mounted touchscreen interface, known as the Graphic Control Center. The 1986 Riviera was the first GM vehicle to get the GCC, which means it was the first production car in history with a factory-installed touchscreen display. This system became available in the Buick Reatta and the Oldsmobile Toronado a few years later.  The GCC used a cathode-ray tube screen sourced from an ATM manufacturer, which ran on 120VAC power and required an inverter and dangerous high-voltage wiring inside the dash. It was used to operate the HVAC, the radio and the trip computer, as well as to display operating and diagnostic information. The system used numerous bulky components in addition to the dash screen; I've extracted a couple of complete sets of GCC components over the years and plan to build them into a junkyard-parts boombox. As it turned out, the senior-citizen-heavy demographic of Buick shoppers didn't feel great enthusiasm for the GCC and there wasn't a huge sales payoff for this revolutionary technology. That didn't stop GM from introducing the first mass-produced cars with head-up displays a couple of years later. The running gear wasn't quite as sophisticated as the GCC. The 1986-1993 Rivieras got old-fashioned 3.8-liter Buick V6s under their hoods; the one in this car was rated at 140 horsepower and 200 pound-feet. If you wanted a manual transmission in your '86 Rivvie, you were out of luck. A four-speed automatic was mandatory equipment. Note the unusual face-loading cassette deck in front of the shifter; the AM/FM radio was a remote-controlled unit living inside the center console. The MSRP for this car was $19,831, or about $55,691 in 2023 dollars.

Buick luxury sedan design sketch would make a great flagship

Over the Thanksgiving holiday General Motors posted a sketch of a futuristic Buick sedan to social media. In fact, the sleek wedge is just the latest in a series of illustrations that seem to point the way to a luxury EV coming in 2024 (for model year 2025). That's when Buick has promised its first fully-electric vehicle, with the promise that the entire lineup will be gasoline free.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) The sketch shows a low, long sedan that seems to be inspired (or perhaps served as the inspiration for) the Buick Wildcat concept revealed in June. However, there are significant differences as well. The sketch shows a profile that's more cab backward than the Wildcat's, with a gently sloping roofline that's more Audi A7 than the physical car's aggressive Nissan GT-R-like top.  The front end is less busy than the Wildcat's as well, with the chrome better integrated into the fascia and headlights. Similar brightwork appears on the rocker panels and on the fenders behind the wheel arches, cues the Wildcat concept lacks. Buick's updated logo sits at the end of a sporty BMW-esque trough on the hood. Of course, the exaggerated wheels have such little clearance they wouldn't really be able move or turn, much less survive a pothole, but we can forgive that artistic liberty. Other recent sketches shown on the GM Design account on Instagram show a more refined version of the same sedan, but without the Wildcat's Honda CR-V-esque taillights. Another super-luxurious coupe with hints of Syd Mead looks just as beautiful but is unbranded and may work better as a Cadillac. The Buick brand feels a bit redundant these days, but stunning designs like these could help differentiate the brand. The General has plenty of trucks and SUVs already. If it's going to foist crossover after crossover at us, maybe the Buick division could stand out as the sedan-and-coupe-only brand. Related video: