2011 Buick Lacrosse Cxl on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

GM cutting Chevy Sonic, Buick Verano production [UPDATE]

UPDATE: A previous version of this story indicated that Orion Assembly would be idled for seven weeks, from February 16 through April 6. This was incorrect. The factory will instead only be idled for the weeks of February 16 and April 6. The story has been edited to reflect this. General Motors has announced that the factory responsible for the Buick Verano and Chevrolet Sonic will be idled for the weeks of February 16 and April 6, with blame being placed on excess supply. The Orion Assembly plant, about 45 minutes north of GM's Renaissance Center headquarters, employs about 1,800 people, but they'll be given a pair of furloughs as inventories of the sub-compact Sonic and premium compact Verano reach 127 days and 84 days, respectively. That works out to 26,600 Chevys and 9,800 Buicks waiting for buyers. According to Automotive News, the compact Chevy sales bested the industry average in 2014, jumping up nine percent versus the the overall segment's eight-percent gain, while the Buick sedan's sales were down four percent. When asked about the shutdown, a GM spokesman told AN that it will "build to market demand," while also pointing out that the company did not comment on production plans. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing Buick Chevrolet GM buick encore orion assembly

Buick Blackhawk concept headed to auction block again

While the collector car auction market is often criticized for inflating the price of vintage models out of the realm of affordability for many buyers, these sales do give us an opportunity to look back on some of the beautiful, rare designs of the past. Just take a glance at this Buick Blackhawk concept with a shape right out of the '40s or '50s. Despite the heritage styling, it was pieced together from older pieces for Buick to celebrate itself in the early 2000s With styling inspiration from the classic Buick Y-Job concept car, the Blackhawk mixes actual vintage components to create its curvaceous shape. However, the power retractable top is thoroughly modern being made from carbon fiber and stows in the deck lid when the roof needs to go down. After so much work on the outside, the Buick has something equally surprising under the hood. It's a 1970 455-cubic-inch (7.5-liter) V8 GS Stage III V8 with a claimed 463 horsepower and 510 pound-feet of torque, and for easy cruising the mill is linked to a four-speed automatic. Built in-house by Buick, the Blackhawk was once part of the General Motors Heritage Fleet, but the automaker sold it off in 2009 at the Barrett-Jackson auction in Scottsdale, AZ, along with many other members of the collection. The concept went for $522,500 after the buyer's premium, according to the auctioneers. Now, it's crossing the block again with no reserve as part of RM Auctions sale of the Andrews Collection on May 2, 2015, in Fort Worth, TX. The 75-car auction also includes highlights like one of seven 1962 Ferrari 400 Superamerica SWB Cabriolet models bodied by Pininfarina. Featured Gallery Buick Blackhawk Concept News Source: RM Auctions, Barrett-Jackson AuctionsImage Credit: Darin Schnabel Courtesy of RM Auctions Design/Style Buick Auctions Convertible Concept Cars