Buick Grand National 86 on 2040-cars

Auto blog

Buick Encore, Chevy Trax earn Top Safety Pick from IIHS [w/video]

The Buick Encore has been a massive sales success practically from the moment it debuted, and Buick recently decided to increase production to keep up with demand for the premium compact crossover. The Insurance Institute for Highway Safety recently put one to the test again, and the Encore earned a Top Safety Pick award. It's the first model from the brand to score the nod since 2013, according to the IIHS, and the rating also carries over to the 2015 Chevrolet Trax. The 2015 Encore scored a Good rating in all of the IIHS' evaluations, including the 40-mile-per-hour, small overlap front crash test. That was a big improvement over the previous model the institute tested, which scored a Poor result in the overlap test. In the first test, about 13 inches of the lower door hinge pillar came into the passenger compartment, and the steering wheel airbag moved too far to protect the dummy's head. Improvements for the latest model year showed six inches of intrusion this time, and the airbags caught the dummy's head well. The dummy's sensors also indicated a low risk of injury. The two CUVs missed out on the full Top Safety Pick+ because the IIHS scored the Encore as only having a basic front crash prevention system, and there was no such equipment for the Trax. To earn the highest mark, models need at least an advanced rating by the institute for this technology. Buick Encore, Chevrolet Trax earn 2015 TOP SAFETY PICK award ARLINGTON, Va. - A small SUV is the first vehicle from the Buick brand to qualify for a TOP SAFETY PICK award from the Insurance Institute for Highway Safety since 2013. The Buick Encore's newly introduced, lower-priced twin, the Chevrolet Trax, also qualifies for the honor. The Encore's award follows improvements to the SUV's structure for better small overlap front protection. The 2015 model earns a good rating in the small overlap test. In contrast, the 2013-14 Encore rated poor in the test. The driver's space was seriously compromised with intrusion measuring as much as 13 inches at the lower door hinge pillar. The dummy's head barely contacted the front airbag before sliding off the left side, as the steering column moved to the right. The side curtain airbag deployed too late and didn't have sufficient forward coverage to protect the head. In the latest test, the driver space was maintained reasonably well, with maximum intrusion of 6 inches at the door hinge pillar and instrument panel. The dummy's movement was well-controlled.

GM cutting production at two plants

General Motors is continuing to adjust to excess supply of some of its brands' models. To get production more in line with the vehicles' actual demand, the automotive giant is idling two of its factories in North America in the coming months. The Orion Assembly plant is going to be down from March 9-13, according to an anonymous plant worker and another insider speaking to Automotive News. The factory builds the Chevrolet Sonic and Buick Verano, but there are plenty of both models sitting on dealer lots, including 216 days worth of Sonics, according to AN. The factory already had two idle periods announced to reduce the excess. In addition, downtime is scheduled at GM's "Flex" line at the Oshawa, Ontario, Canada, plant from April 13-17. This affects supply of the Chevrolet Camaro, Impala, Buick Regal and Cadillac XTS. Among them, the automotive giant has the largest supply of Regals ready for dealers with 213 days worth of them, according to AN. The future for the whole Oshawa factory is cloudy in general, though. There are rumors that it could close entirely in the future because the Camaro is leaving and the Regal and XTS might not last much longer than 2017. The Canadian government and the labor union there intend to put up a fight, though. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing Buick Cadillac Chevrolet GM orion assembly oshawa plant idle

2016 Buick Envision might be your first Chinese-built crossover

At the Detroit Auto Show, the new Envision crossover flips the traditional Buick paridigm on its head. We've been hearing for years about strong sales of the Buick brand in China, but now we'll see if North America is ready for a Chinese-built (but, as GM is very quick to point out, American-engineered) CUV. The Envision rides on the latest version of the Delta 2 platform that underpins many GM vehicles. It'll slot between the tiny Encore and the cavernous Enclave, which is a nice sweet spot for volume sales in the hot crossover market. Gas is cheap, and Americans are eating these vehicles up – in a market like this, does it really matter where the Envision was actually screwed together? The powertrain package is surprisingly compelling – perhaps there will be some life to the driving experience. Motivation is provided by a 252-horsepower turbo inline-four and a six-speed auto, and in a first for a Buick crossover, it'll feature the torque-steer fighting HiPer suspension, which splits up steering and suspension duties in a way that'll tidy up the front axle's manners under power. A few other neat tricks make it into the Envision, like active grille shutters to squeeze some extra efficiency out of the CUV, and available park assist. The 2016 Buick Envision goes on sale later this year. Buick Introduces Envision Luxury Crossover DETROIT – The 2016 Envision is an all-new luxury compact crossover with segment-challenging driving dynamics, advanced technology, connectivity and Buick's trademark interior acoustics. It is a global vehicle, designed from the ground up as a Buick luxury compact crossover. It goes on sale in the U.S. in the second quarter of 2016. "The all-new Buick Envision is a modern, confident and responsive luxury compact crossover that combines the brand's core characteristics with great performance features like our HiPer strut suspension," said Duncan Aldred, vice president of Buick.