2018 Buick Encore Preferred Sport Utility 4d on 2040-cars

Auto blog

Junkyard Gem: 1978 Buick Skylark Sedan

Around the time that OPEC shut off the oil taps, The General realized that it was time to sell more small cars from GM divisions not previously known for such machines. The logical candidate for this project was the Chevrolet Nova, a rear-wheel-drive compact that shared much of its chassis design with the Chevrolet Camaro and Pontiac Firebird. The Nova-based Pontiac Ventura came out in the 1971 model year, and the Buick and Oldsmobile Divisions began producing their own badge-engineered Nova siblings for 1973 (Cadillac was late to the party, but eventually created the Nova-based Seville for 1976). At first, the Buickized Nova got Apollo badges, but the better-known Skylark name was applied to these cars for the 1975 through 1979 model years. Today's Junkyard Gem is one of those Nova-based Skylarks, found in a Denver self-serve yard. From the 1964 through 1972 model years, the Skylark lived on the A-Body chassis and was sibling to the Chevrolet Chevelle/Malibu, Pontiac LeMans/Tempest/GTO, and Oldsmobile Cutlass/442. After the 1975-1979 rear-wheel-drive X-Body phase, the Skylark name then went onto the unrelated front-wheel-dive X-Body chassis developed for the Chevrolet Citation. It's a Nova, sure, but Buick made sure that it had a bit more swank than its Chevy counterpart. Checked seat fabric with big square buttons! The base engine in the '78 Skylark was the 3.8-liter Buick V6, rated at 110 horsepower. GM had invested in a new crankshaft design for this engine the year before, so it no longer had the "odd-fire" cut-down V8 crankshaft that shook the fillings out of so many drivers' teeth in earlier years. An assortment of low-compression V8s from Oldsmobile, Chevrolet, Pontiac, and Buick were available as optional equipment as well, eventually leading to the "Chevymobile" lawsuits of a few years later. The base transmission in this car was a three-speed manual (I'm not sure if you could still get a three-on-the-tree column-shift manual Skylark in 1978, but a three-on-the-floor manual was available for sure). The very last three-on-the-tree car Americans could buy was the '79 Nova and its Olds Omega/Pontiac Phoenix siblings, while the final three-on-the-floor cars were the '81 Malibu and siblings. This car has the optional three-speed automatic.

2022 Buick Envision Plus three-row crossover is like an Envision, plus

Buick exited the sedan segment when it axed the Regal, but it's going all-in on crossovers and SUVs. It released a dark preview image that gives us an early look at a three-row family-hauler named Envision Plus. Announced only for the Chinese market as of writing, the Envision Plus is — as its name implies — positioned above the Envision in the company's range, though it's smaller than the Enclave. It's mechanically related to the crossover it shares its nameplate with, but it appears to receive a specific design with a new-look front bumper and a more upright grille. It also wears a boxier silhouette that allowed Buick to add a third row of seats. Extra seating aside, we expect the Plus will offer an interior close to the standard Envision's, which we described as "a scaled-down take on the Enclave's interior" in February 2021. Similarly, Buick will likely offer the Envision Plus with the same turbocharged, 2.0-liter four-cylinder as the smaller model. It produces 228 horsepower and 258 pound-feet of torque, and it spins the front or the four wheels via a nine-speed automatic transmission. Buick will release more details about the 2022 Envision Plus in the coming weeks, and it will unveil the model at the 2021 edition of the Shanghai auto show opening its doors on April 21. While the company hasn't confirmed plans to sell its latest crossover in its home market, we wouldn't be surprised if it arrives here before the end of 2021. Auto shows were put on hiatus in 2020, at the height of the on-going coronavirus pandemic, and the upcoming Shanghai show is the first major industry event in over a year. In addition to the Buick people-mover, we'll discover Toyota's first global electric car. It will arrive as a near-production concept close in size to the hot-selling RAV4. Related video: 2021 Buick Envision Running Footage

Buick Wildcat EV concept previews the future of the brand

Once again, Buick has revealed a drop-dead stunner of a coupe concept, the Wildcat EV. And just like the Avista that came before it, don't get your hopes up too high for a production model. Buick hasn't said "no," but they haven't said "yes," either. But unlike the Avista, the Wildcat does give us a look at where Buick is going as far as styling, branding and technology. Also, did we mention it's freaking gorgeous? The Wildcat EV started out as a sketch by a Buick designer that caught the eye of the department, simply because it was really cool. The team started developing it further, and eventually the brand gave the go-ahead to bring it to the full-size concept you see here. It is purely a design concept, so although it's an EV by name, it doesn't have any kind of production powertrain or real specs. But it is designed with electric power in mind, as evidenced by the extremely long wheelbase and short overhangs. And this translates into Buick's electric future. The brand plans to be fully electric by 2030, and its first EV will launch in 2024 as a 2025 model. The shape of the coupe is very clean, simple and organic, but with interesting creases and intersections scattered throughout. It has wide haunches and a low, pointy nose. The grille is pushed down and made wide, which accentuates the shape of the car. The badge now sits atop the bumper, too. The greenhouse has blacked-out front pillars to create a wraparound look, and the roof has a gentle slope toward the rear. It incorporates a glass hatch, and the taillights blend into the glass and extend all the way up the rear pillars. While Buick isn't making a commitment either way for the Wildcat EV, these styling cues will appear on future Buick models. So imagine the front and rear fascias, the window treatment and sheetmetal detailing, but on other bodystyles, likely crossovers and SUVs. In fact, Buick said it has two models it will reveal later this year with some styling based on the Wildcat. Before we get too far from design, we should also highlight other cool aspects of the Wildcat EV concept. The wheels are turbine shaped as a throwback to Jet Age design and optimism. Each wheel took two months to produce and finish. The doors on the Wildcat are conventional, except for the gull-wing upper panels. They open up to make ingress and egress easier. And the interior is a gorgeous, mid-century-modern design.