2018 Buick Encore Essence on 2040-cars

Auto blog

Junkyard Gem: 1962 Buick Electra 225 4-Door Sedan

Buick built its first Electras as 1959 models, with Electra production continuing unabated through 1990 (after which the Park Avenue trim level took over as the model name, much as the Malibu trim level designation had shoved aside the Chevelle model name in 1978). Some of the handsomest Electras were the second-generation models, built for the 1961-1964 model years, and today's Junkyard Gem is one of those cars. I'd always assumed that the Buick Electra took its name from the daughter of Clytemnestra and Agamemnon in Greek mythology, because the people who named cars back then were forced to read Euripides and Sophocles as undergrads. In fact, the car was named after Electra Waggoner Bowman Biggs, a Texas heiress and sculptor who married the brother-in-law of Harlow Curtice, who ran the Buick Division before being promoted to president of General Motors in 1953. How did she feel when the last Electra rolled off the assembly line in 1990? The junkyard is full of history, if you know where to look. The 1959-1960 Electra had enormous tailfins, angled something like the ones seen on the same-year Chevrolet Impalas. This Electra generation ditched the fins but kept much of the general Space Age spirit of its predecessor. The Electra lived on the same platform as the Cadillac DeVille and Oldsmobile 98 from start to finish, and it was the most expensive Buick available in 1962. The MSRP of this one was $4,051, or about $41,462 in 2023 dollars. The engine in this one was present when it arrived at U-Pull-&-Pay, but a junkyard shopper grabbed it within a couple of days of arrival. It would have been a 401-cubic-inch (6.5-liter) "Nailhead" V8, rated at 325 horsepower and a whopping 445 pound-feet of torque (keep in mind that these are gross, not net, power numbers). The Nailhead's small valves meant that it wasn't much good for high-rpm use, but its big torque was perfect for moving two-ton land yachts. The final Nailheads were installed in 1966 Buicks. Every production Electra ever built came with an automatic transmission, and the 1959-1963 models received the extremely smooth and alarmingly inefficient Dynaflow (known as the Dual-Path Turbine Drive for 1962). Originally developed for use in the 1943 M18 Hellcat tank destroyer, the Dynaflow was considered a two-speed automatic but drove more like a CVT with two selectable drive ranges.

Junkyard Gem: 1956 Buick Special 4-Door Sedan

Buick was flying high in the middle 1950s, with an all-time sales record of nearly 800,000 cars sold for the 1955 model year alone. Buick stood proud in third place for new-car sales in the United States for 1955 and 1956, behind only Chevrolet and Ford. At this time, both Oldsmobile and Buick built cars on the GM B Platform, with the Buick being the swankier and more prestigious of the two. Here's one of those Buicks, found in a Denver self-service boneyard recently. The list price of this car was $2,416, or about $27,505 in 2023 dollars. Located one step down on the GM Ladder of Success, the 1956 Olds 88 sedan started at $2,226 ($25,342 now). The Oldsmobile had a 324-cubic-inch (5.3-liter) Rocket V8 rated at 230 horsepower, which was serious stuff for 1956. This 322-cubic-inch Buick Nailhead V8 made ten fewer horses for 1956, but it would be bored and stroked out to 364 cubes for 1957 (and was all about land-yacht torque, in any case). A three-on-the-tree manual transmission was standard equipment on the 1956 Buick Special, but this one has the $204 Dynaflow automatic transmission ($2,332 in today's money). The Dynaflow usually gets called a two-speed, but it drove like more of a very inefficient (yet smooth) CVT that had two manually-selected ranges. This car spent too many decades outdoors to have any chance of a restoration. As often happens with cars stored in fields in rural Colorado, someone used this Buick for target practice. The bullet holes look like little VentiPorts. Does the '56 Buick go? Va-va-va-voom!

Buick Wildcat EV concept previews the future of the brand

Once again, Buick has revealed a drop-dead stunner of a coupe concept, the Wildcat EV. And just like the Avista that came before it, don't get your hopes up too high for a production model. Buick hasn't said "no," but they haven't said "yes," either. But unlike the Avista, the Wildcat does give us a look at where Buick is going as far as styling, branding and technology. Also, did we mention it's freaking gorgeous? The Wildcat EV started out as a sketch by a Buick designer that caught the eye of the department, simply because it was really cool. The team started developing it further, and eventually the brand gave the go-ahead to bring it to the full-size concept you see here. It is purely a design concept, so although it's an EV by name, it doesn't have any kind of production powertrain or real specs. But it is designed with electric power in mind, as evidenced by the extremely long wheelbase and short overhangs. And this translates into Buick's electric future. The brand plans to be fully electric by 2030, and its first EV will launch in 2024 as a 2025 model. The shape of the coupe is very clean, simple and organic, but with interesting creases and intersections scattered throughout. It has wide haunches and a low, pointy nose. The grille is pushed down and made wide, which accentuates the shape of the car. The badge now sits atop the bumper, too. The greenhouse has blacked-out front pillars to create a wraparound look, and the roof has a gentle slope toward the rear. It incorporates a glass hatch, and the taillights blend into the glass and extend all the way up the rear pillars. While Buick isn't making a commitment either way for the Wildcat EV, these styling cues will appear on future Buick models. So imagine the front and rear fascias, the window treatment and sheetmetal detailing, but on other bodystyles, likely crossovers and SUVs. In fact, Buick said it has two models it will reveal later this year with some styling based on the Wildcat. Before we get too far from design, we should also highlight other cool aspects of the Wildcat EV concept. The wheels are turbine shaped as a throwback to Jet Age design and optimism. Each wheel took two months to produce and finish. The doors on the Wildcat are conventional, except for the gull-wing upper panels. They open up to make ingress and egress easier. And the interior is a gorgeous, mid-century-modern design.