Awd Heated Leather Runs And Drives Excellent on 2040-cars

Auto blog

Kia Telluride vs Buick Enclave Luggage Test | What actually fits behind that third row?

So, you want to buy a three-row crossover. Before plunking down $40,000 on a new sport utility vehicle, might we dissuade you with the prospect of minivan ownership? The Pacifica Hybrid, perhaps ... no? Fine. Good thing crossovers (especially the Telluride and comparable Palisade) are so nice to drive these days. We’ll assume you want the big three-row crossover, as you intend to seat folks in all three rows. Unfortunately, raising that third row reduces the luggage area from cavernous to crawl space. ItÂ’s rather devastating from a pure numbers perspective to the two models we have today. The 2019 Buick Enclave goes from a monstrous 58 cubic-feet with the second-row in place down to 23.6 cubic-feet (which along with the nearly identical 2020 Chevrolet Traverse is still best-in-class). Meanwhile, the 2020 Kia Telluride takes a similar hit, going from 46 cubic-feet down to 21 cubic-feet. Just looking at the numbers, it would seem that the EnclaveÂ’s big advantage all but disappears with the third row up, boasting just 2.6 cubic-feet of storage more than the Telluride. But as West Coast Editor James Riswick has discovered in the numerous luggage tests he's conducted, the numbers don't always tell the whole story. Let's see how the Enclave and Telluride compare when you actually put things inside.  Boom. The Enclave swallows all of the test luggage we have for it without any fuss. The distance between the back of the seats to the hatch opening is enough to fit our full-size suitcase horizontally, making it easy to stack every other bag around it. It even fits below the seatbacks, so the driver will have an uninhibited view out the rear of the vehicle.  At our Michigan HQ, our test luggage consists of the following pieces: 28-inch upright suitcase, 24-inch upright suitcase, 19-inch upright suitcase, two small tote bags and one backpack. ItÂ’s likely enough luggage for a quick weekend getaway with the family, given there are no strollers involved. As we attempted to pack it all into the Telluride, weÂ’re glad we didnÂ’t have anything else. The loss of 2.6 cubic-feet of space was indeed felt much harder than what it looks like on paper. We knew we were in trouble when the 28-inch suitcase didnÂ’t fit along the floor as it did so neatly in the Enclave. We were forced to stack it up next to the rear seats, which left it sitting rather tall back there. As a result, the other suitcases didnÂ’t have a neat or convenient place to go.

GM applies for 'Enspire' trademark for the second time

When we wrote about the Buick Enspire concept debut in China earlier this year, we said "we wouldn't be surprised to see either an all-new crossover, or a redesigned current model, sporting the designs seen on this concept." Now it appears General Motors might be planning to go with Option A. GM Authority discovered a trademark application for the name "Enspire," to be applied to "Automobiles, excluding motor homes." This is the second time GM filed for the name, the first being in 2015. As always, applications don't mean certainties. However, we know Buick has a range of new models in development, it's losing the LaCrosse sedan and its crossovers sell quite well. If there's to be a new vehicle called Enspire, it shouldn't be hard to guess what kind it would be. GMA's previous investigations picked up clues that there'll be two new Buick crossovers, one about the size of the China-sourced Envision and sitting on the E2 platform that supports the Cadillac XT4, Chevrolet Malibu, and Buick Regal. Based on data in an IHS Automotive document, the site said the putative Enspire's platform code is E2UB, the U for utility vehicle, the B for Buick. The other crossover would sit above an Envision, below the Enclave, on the short-wheelbase C1 platform employed by the Cadillac XT5. We can probably take the Enspire concept's design cues as a preview of the future, if not its electric drivetrain. Designers carved the wide, formidable stance with curved and elongated versions of traditional Buick brand cues, such as the grille crossbar stretching into the headlights. A futuristic, art-filled and screen-heavy interior contrasts with genuine wood, and is probably best not to look at because Buick couldn't bring anything like it to production. The electric drivetrain included a 550-horsepower electric motor and enough battery to power a 370-mile range. Those figures seem a little outlandish given the potential price tag and the Buick badge. Besides, GM has other plans for a dedicated EV powertrain in development that should bow around 2021, and a Buick EV based on the Chevrolet Bolt's BEV II architecture. As such, a conventional powertrain seems more likely for an Enspire crossover, at least initially. The same IHS Automotive document said the E2UB vehicle would go into production in Shanghai in late 2019.

Junkyard Gem: 1986 Buick Riviera

The Buick Riviera personal luxury coupe attained monstrous proportions by the middle 1970s, scaling in at well over 4,500 pounds by 1976. After spending 1977 and 1978 as sibling to the Chevy Caprice, the Riviera then moved to the front-wheel-drive platform used by the Cadillac Eldorado and Oldsmobile Toronado, staying there through the 1985 model year. The Riviera world became a lot more interesting for the 1986 model year, when a smaller and more sophisticated generation hit showrooms with curvier lines and electronic gadgetry straight out of science fiction. Today's Junkyard Gem is one of those cars, found in a self-service boneyard in Phoenix, Arizona. What makes this car such a fascinating bit of automotive history is this dash-mounted touchscreen interface, known as the Graphic Control Center. The 1986 Riviera was the first GM vehicle to get the GCC, which means it was the first production car in history with a factory-installed touchscreen display. This system became available in the Buick Reatta and the Oldsmobile Toronado a few years later.  The GCC used a cathode-ray tube screen sourced from an ATM manufacturer, which ran on 120VAC power and required an inverter and dangerous high-voltage wiring inside the dash. It was used to operate the HVAC, the radio and the trip computer, as well as to display operating and diagnostic information. The system used numerous bulky components in addition to the dash screen; I've extracted a couple of complete sets of GCC components over the years and plan to build them into a junkyard-parts boombox. As it turned out, the senior-citizen-heavy demographic of Buick shoppers didn't feel great enthusiasm for the GCC and there wasn't a huge sales payoff for this revolutionary technology. That didn't stop GM from introducing the first mass-produced cars with head-up displays a couple of years later. The running gear wasn't quite as sophisticated as the GCC. The 1986-1993 Rivieras got old-fashioned 3.8-liter Buick V6s under their hoods; the one in this car was rated at 140 horsepower and 200 pound-feet. If you wanted a manual transmission in your '86 Rivvie, you were out of luck. A four-speed automatic was mandatory equipment. Note the unusual face-loading cassette deck in front of the shifter; the AM/FM radio was a remote-controlled unit living inside the center console. The MSRP for this car was $19,831, or about $55,691 in 2023 dollars.