2014 Buick Enclave Leather on 2040-cars

Auto blog

2021 Buick Encore sheds top two trims, offer only Base and Preferred

A few days ago, CarsDirect reported that the 2021 Buick Encore would prune its top two trims, the Sport Touring and Essence variants. Paring those two trims would leave the Base and the Preferred, creating larger price and amenities differences between the stalwart Encore and the new, larger, nicer Encore GX. It turns out the change has already gone into effect for the 2020 model year, as shown in Encore's Build & Price page at the brand's web site. Now the only trims available are the 1SV and Preferred. The prices for these trims won't change for next year, either. The Encore will start at $24,195 after a $995 destination charge, and now topping out at $26,215 for the all-wheel drive Preferred model. Previously, the Essence AWD established the top of the hill at $31,795. The move eliminates almost all of the MSRP overlap with the Encore GX, which ranges from $25,195 to $31,595. There will be less feature overlap, too. The now-dead Encore trims opened the door to proper luxury amenities like LED headlights, leather seats, dual-zone climate control, and an auto dimming rear-view mirror. The amenities available on the Preferred are limited to floor mats and accessories, save for the $495 Safety Package that adds Rear Cross Traffic Alert and Side Blind Zone Alert, and the $300 Remote Start. The Encore GX comes in three trims, Preferred, Select, and Essence, and "Leather-appointed seating" doesn't appear until the top-dollar Essence trim for $29,495 in FWD fettle.  The closest the Encore and Encore GX will get to one another is in engine output. The smaller crossover comes only with a 1.4-liter turbocharged four-cylinder that makes 138 horsepower and 148 pound-feet of torque. The Encore GX offers two engines depending on powertrain. A 1.2-liter turbocharged three-cylinder with 137 hp and 166 lb-ft comes solely with front-wheel drive, and a 1.3-liter turbocharged three-cylinder with 155 hp and 174 lb-ft is available with either front- or all-wheel drive. Related Video:    

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.

Junkyard Gem: 1957 Buick Special Riviera Sedan

While I find plenty of 1950s Detroit cars in quick-inventory-turnover self-service wrecking yards during my travels, they tend to be the ordinary post sedans that were built by the millions during the heyday of the three-on-the-tree manual transmission and nuclear-attack symbols on car radios. The more sought-after convertibles, coupes, and four-door hardtops are tougher to find in such yards, which makes today's 1957 Buick Special Riviera in a yard in northeastern Colorado an A-List Junkyard Gem. During the late 1950s, the Special ranked at the bottom of the Buick prestige hierarchy just below the more upscale Super and Century. Of course, this was the era of Alfred Sloan's "Ladder of Success" and the lowliest Special outranked even the nicest Olds Ninety-Eight on the Swank-O-Meter. If you were the Buick-driving Joneses and your neighbors had proletarian Chevrolets, aspirational Pontiacs, or petit-bourgeois Oldsmobiles, they were failing to keep up with you… but then you'd see a new Cadillac and feel intense envy for your victorious rival. The Ladder of Success collapsed later on, when the top-trim-level Chevy Caprices began to compete against their Cadillac Calais big brother, but it was still standing tall in 1957. The Riviera name ended up being used for its own distinct model starting in 1963 and continuing nearly into our current century, but in 1957 it was a trim level designation, used to indicate a Century or Special sedan with the then-radical pillarless hardtop design. This car listed at $2,780, which comes to a cool $27,630 in 2021 dollars. That price included the 364-cubic-inch (6.0-liter) Buick Nailhead V8 engine, rated at 250 horsepower and enough torque to peel 1957's rock-hard bias-ply tires right off their rims. The Special had a three-on-the-tree column-shift manual as standard equipment, but the original buyer of this car sprang for the extra $220 ($2,185 today) to get the Dynaflow transmission. While the shift indicator looks just like the ones on GM cars equipped with the two-speed Powerglide, the Dynaflow was an odd beast used only in Buicks; while it had gears for two forward speeds, the driver had to select low gear manually. Otherwise, a complex torque converter rig provided an experience something like today's CVTs (though with better smoothness and much more wasted power), in which the car stayed in high gear all the time and used the torque converter to multiply as needed.