2014 Buick Enclave Leather on 2040-cars

Auto blog

Junkyard Gem: 1990 Buick Reatta Coupe

During the 1980s, General Motors worked hard to woo back American car shoppers who had defected to European luxury brands. Swanky interiors, futuristic electronics and Europe-influenced styling found their way into quite a few GM models during the second half of the decade. Pontiac had the 6000 STE, Oldsmobile offered the Toronado Trofeo, Cadillac sold the Turin-Hamtramck-built Allante, and Buick produced the sporty Reatta two-seater. Just under 22,000 Reattas were built during the 1988 through 1991 model years, and today's Junkyard Find is the fifth example I've found during my junkyard travels. The Reatta was the most expensive 1990 Buick, priced at $28,335 for the coupe and $34,995 for the convertible (or about $65,895 and $81,380 in inflation-adjusted 2022 dollars).  For that kind of money, American car shoppers in 1990 could get a BMW 325i in coupe or convertible form for $24,650 or $33,850. They could get a Saab 900 Turbo convertible for $32,995 or an Audi Coupe Quattro for $29,750. Each of those European competitors had sophisticated overhead-cam engines and grippy suspensions, but the Reatta was built on a shortened version of the chassis that went under the Barcalounger-esque Buick Riviera and its engine was the old-timey pushrod Buick V6. The 3.8-liter Buick V6 had been made quite reliable and acceptably smooth by the time this car was built, and it made 165 horsepower (just three fewer than the BMW 325i), but Buick salesmen didn't have much to brag about when showing this engine compartment to a 35-year-old youngster who had just driven a Saab 900 Turbo. The antiquated engine was problem enough, but the lack of a manual transmission served to chase off additional potential buyers. A four-speed automatic was mandatory in every Reatta. Just in case some traditional (i.e. Greatest Generation members) Buick customers might consider this glamorous two-seater, Buick scared them off with the Reatta's video-game-style digital dash and its way-ahead-of-its-time Graphics Control Center touchscreen interface. You can't win! The Graphics Control Center hardware has been grabbed from this dash (the components also fit optioned-up Rivieras and Trofeos of the same era, so junkyard shoppers pull them for resale). Naturally, a Reatta owner would want a hardwired car phone. If you really wanted to be cool in the early 1990s, you bought a Chrysler product with the amazing VisorPhone.

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.