2010 Buick Enclave Cxl Sport Utility 4-door 3.6l on 2040-cars

Auto blog

Buick Envision Plus is a seven-seater tweener developed for China

Buick has filled the gap separating the Envision and the Enclave with a new crossover named Envision Plus. Launched at the Shanghai auto show, the three-row people-mover is scheduled to go on sale in China later in 2021. The plus-sized Envision stretches 190.7 inches long, 74.1 inches wide, and 66.7 inches tall, figures that make it around eight inches longer and two inches taller than the regular Envision. It's also a full 14 inches shorter, four inches narrower, and three inches lower than the Enclave, which is the biggest crossover in the Buick range. Designers didn't settle for stretching the Envision's wheelbase. They gave the Plus a more upright front end characterized by a taller grille, a flatter and longer roofline, and a redesigned rear end accented by a strip of bright trim that connects the lights. Only photos of the upscale Avenir trim (shown above) have been published so far. Images of the cabin are not available yet. We expect the Plus offers an interior close to the standard Envision's — from the driver's point of view, at least. The biggest difference is that the longer Envision lives up to its name by letting motorists take more gear or kids along for the ride thanks to a more spacious trunk and third-row seats. Power for the Envision Plus comes from a turbocharged, 2.0-liter EcoTec four-cylinder engine fitted with 48-volt mild-hybrid technology. Bolted to a nine-speed automatic transmission, the turbo-four is the same basic engine found in the American-spec Envision, where it develops 228 horsepower and 258 pound-feet of torque, but figures for the Plus weren't released. Front- and all-wheel-drive models will presumably be available. Buick will release pricing information closer to the model's on-sale date. As of writing, the Envision Plus has only been announced for China, where it will be built, but unverified reports claim it will arrive in American showrooms before the end of 2021. We've reached out to the company, and we'll update this story if we learn more. 2021 Buick Verano Pro GS View 5 Photos What else did Buick show in Shanghai? Buick no longer sells sedans in America, but it remains present in that segment on the Chinese market. In addition to the Envision Plus, it unveiled a model named Verano Pro developed specifically for China, built locally, and aimed at relatively young buyers. At launch, motorists will be asked to choose between the regular sedan and a sportier-looking variant that wears the storied GS emblem.

2013 Buick Verano Turbo vs. 2013 Acura ILX 2.4

Answering The $30,000 Entry-Level Luxury Question
Twenty years ago, a comparison between an entry-level Buick and Acura would have matched a Skylark against an Integra.
Twenty years ago, a comparison between an entry-level Buick and its Acura equivalent would have matched a Skylark against an Integra. The unfair battle would have resulted in the compact American's defeat in nearly every measurable category, as the Japanese competitor was arguably at the height of its powers.

Junkyard Gem: 1962 Buick LeSabre 2-Door Sport Coupe

American car shoppers looking for a full-sized hardtop coupe in 1962 couldn't go wrong with the offerings from The General. Chevrolet would sell you a snazzy new Bel Air sport coupe for just $2,561 (about $23,800 today), but those Joneses next door wouldn't have felt properly shamed if you put a new proletariat-grade Chevy in your driveway. No, to really stand tall during the era of Alfred Sloan's Ladder of Success, you had to go higher up on the GM food chain. For the B-platform full-sized cars of 1962, that meant the Pontiac Catalina/Bonneville beat the Chevy, the Oldsmobile 88 was the next step up the ladder, and at the very top was the Buick: the hot-rod Invicta and its swanky LeSabre sibling. To go beyond that, you had to move up to a C-platform Buick Electra or Cadillac. Today's Junkyard Gem is a once-luxurious '62 LeSabre, now much-faded in a northeastern Colorado boneyard. The reason GM shoppers got so bent out of shape about the "Chevymobile" episodes of the late 1970s, in which some GM cars received engines made by "lesser" GM divisions, was that each division had its own family of V8 engines during the 1950s and 1960s and they weren't supposed to be mingled. The '62 LeSabre got a 401-cubic-inch (6.5-liter) Nailhead engine (so called because the valves were unusually small), rated at 265, 280, or 325 (depending on what kind of compression ratio and carburetion you wanted). That's not crazy horses for a big-displacement, two-ton luxury coupe of its era, but the small valves allowed for combustion chambers optimized for one thing: low-rpm torque. This 401 has the two-barrel carburetor, so it made either 412 or 425 pound-feet of torque. That's just a bit less than the mighty Cadillac's engine that year, and definitely sufficient to get this car moving very quickly. You had to pay a fat premium on the Chevrolet, Pontiac, and Oldsmobile B-bodies to get an automatic transmission (a three-speed column-shift manual was base equipment in those cars), but a Turbine-Drive (formerly known as the Dyna-Flow) automatic was standard issue on the 1962 LeSabre. This was an interesting transmission design that traced its origins back to the 1942 M18 Hellcat Tank Destroyer and used torque-converter multiplication to provide a CVT-like experience with no perceptible shifts (the driver could select a separate low gearset manually, so the shifter looks just like the one on the true two-speed Powerglide transmission).