Le Mans Editon on 2040-cars

Auto blog

Bentley Continental GT commemorating Pikes Peak win is one green machine

Back in June, the Bentley Continental GT set a production-car record for the Pikes Peak hill climb, and now there's a limited edition to celebrate. Maybe the wait was so the brand's Mulliner division could work up a batch of the car's special green paint, which Bentley calls Radium. The green hue is taken from the hill climb car's livery, and it appears not only on the body, but also on the Pirelli P Zero tires and inside as contrast stitching, floor mat edging, and embroidery of Pikes Peak on the headrests. The not-quite-matching color on the brake calipers is Bentley's Acid Green. Besides Radium, the model also is offered in black. The special edition also features Pikes Peak graphics on the front fenders, a carbon fiber body kit, a black roof panel, black side mirrors, and 22-inch wheels also in black. Buyers can opt for Bentley's "100" grille (honoring the brand's centenary year), as pictured here. Besides the Radium green accents, the interior also comes with carbon fiber and gloss-black trim. A graphic showing one of five different sections of the track appears above the glove box, along with the record time of 10:18.488. Bentley's rotating center display also is included along with comfort-spec front seats and deep pile floor mats. All of the cars will be fitted with the 626-hp W12 engine. Pricing for the Pikes Peak limited edition depends on buyer specification, so there's no official MSRP. Nor is there a specific model name. But Bentley is saying that only 15 cars with this special set of extras will be built, and even without a name, it shouldn't be hard to distinguish them from other Continental GTs.

2022 Bentley Flying Spur Hybrid has pure electric range, near-V8 performance

Bentley is adding the new 2022 Flying Spur Hybrid as a third powertrain option in the Flying Spur family that already includes a W12 and V8 model. It’s BentleyÂ’s second hybrid vehicle, joining the Bentayga Hybrid in the companyÂ’s rollout of slightly greener vehicles. This Flying Spur PHEV is the result of borrowing powertrain components from Porsche for its powertrain components. A 2.9-liter twin-turbo V6 and electric motor combine for a total system output of 536 horsepower and 553 pound-feet of torque. The horsepower is slightly down from the Panamera 4S E-Hybrid, but its 553 pound-feet of torque is identical to the Porsche from which its powertrain is derived from. This motivates the Flying Spur Hybrid from 0-60 mph in just 4.1 seconds, which is just 0.1 second slower than the V8. Top speed is an impressive 177 mph. ThereÂ’s nothing slow about it. As for the electrics, Bentley is using a 14.1 kWh battery pack. Tested on the optimistic WLTP test cycle, Bentley predicts itÂ’ll have a range rating greater than 25 miles. The Porsche Panamera 4 E-Hybrid with the same size battery pack (2020 model, because the 2021 Panamera got a bigger battery pack) is EPA-rated for 14 miles on a full charge, so we suspect the Flying Spur will be closer to this total when it receives its EPA rating. YouÂ’ll be able to choose between pure EV mode, Hybrid Mode or Hold Mode (retains current battery charge) depending on how you wish to utilize the battery charge on your drive. A new dedicated button on the interior facilitates these mode changes, and besides the necessary hybrid-specific infotainment software and cluster layout, is the only physical change to the interior. Hybrid models will be recognizable via their small “Hybrid” badge on the front fender. TheyÂ’ll also have new quad oval tailpipes and a charging port on the left rear fender. Fuel economy figures are not yet available from Bentley, but if the Panamera it shares powertrains with is any indication, we may not see massive gains by going from the V8 to the V6 hybrid. Porsche gains only 1 mpg going from the Turbo to a 4S E-Hybrid, so a similar 1- or 2-mpg bump from the V8Â’s 17 mpg combined figure seems likely. A total driving range of 435 miles is expected with this Hybrid model, which Bentley claims is the best in its lineup. Pricing isnÂ’t out yet, but Bentley says youÂ’ll be able to place an order for a Flying Spur Hybrid this summer. The first customer deliveries are scheduled for the end of 2021.

Bentley's next continuation car is its 1929-30 Le Mans winner

Bentley's Mulliner division will resurrect the Speed Six as its second continuation project. Announced on the sidelines of the 2022 Goodwood Festival of Speed, the born-again classic will be nearly identical to the cars that won the 24 Hours of Le Mans in 1929 and 1930. Continuation cars remain a significant source of controversy among enthusiasts; Ralph Lauren is one of the high-profile collectors who wrote an angry letter to Bentley after the firm announced plans to make 12 replicas of the four 1929 Team Blower models. The criticism didn't dent the model's popularity; all 12 units were spoken for in record time, and this success encouraged Bentley to bring the Speed Six back to life. Why the Speed Six? It's one of the most important models in Bentley's history, according to the company's archives department, largely due to its success at Le Mans. It was an evolution of the 6 1/2 -Litre model whose 6.5-liter straight-six engine was tuned to develop about 180 horsepower, a huge number in the 1920s. It was offered with three different wheelbases, and 182 examples were made between 1928 and 1930. Only a small handful of those were modified for racing; they were built on a 132-inch wheelbase and fitted with a 200-horsepower six. Bentley started the continuation project by sourcing two of the original cars. One is the third of three units that raced at Le Mans in 1930, and it's been nicknamed Old Number Three. It's in private hands. The second is a 1929 model that's part of the carmaker's collection and that has previously received a full restoration. Mulliner has completed a 3D CAD model of the Speed Six using those cars and period documents. Pricing for the Speed Six continuation car starts at GBP1.5 million, a sum that represents about $1.8 million at the current conversion rate. Production is limited to 12 units, and collectors scooped up the entire batch before the project was announced to the public. Bentley will begin building the first car, which is not part of the 12 and which will be used as a testing and engineering mule, in the second half of 2022.   Featured Gallery Bentley Speed Six View 12 Photos Bentley Automotive History Convertible Luxury Racing Vehicles Performance Classics Goodwood Goodwood Festival of Speed