2011 Bentley Mulsanne on 2040-cars

Auto blog

Bentley Continental GT3-R is a limited-edition racer for the street

Limited to just 300 examples worldwide, Bentley's new GT3-R is set to bring a bit of the brand's motorsports pedigree to the street. After all, the Flying B recently took the win at the Blancpain Endurance Series at Silverstone with its new Continental GT3, less than one year after the big racer's debut.
Like the road-going Conti GT, the GT3-R uses a twin-turbocharged 4.0-liter V8, tuned in this application to 572 horsepower and 516 pound-feet of torque - increases of 51 hp and 14 lb-ft from the already potent GT V8 S. That's enough to get the 4,839-pound Bentley to 60 miles per hour in just 3.6 seconds, on its way to a top end of 170 mph.
To make the GT3-R more hardcore than standard Continentals, the air suspension has been retuned, the brakes have been upgraded with carbon silicon discs, and there's a titanium exhaust that's good for 15 pounds of weight-savings - in all, the GT3-R is some 200 pounds lighter than a comparable GT V8 S.

Bentley officially returns to racing at Gulf 12hr

For a company with a tendency to name its cars after parts of the Circuit de la Sarthe like Arnage and Mulsanne, Bentley sure has been gone from endurance sportscar racing for a long time. It famously won the 24 Hours of Le Mans five times in the 1920s, but didn't come back until 68 years later to win again in 2003. That was the last time Bentley competed on the world stage... until now.
Bentley first revealed its rekindled racing ambitions with the Continental GT3 at the 2012 Paris Motor Show. The car would be developed for privateer racers, and that's all led up to this point. Team M-Sport, which you may know better for having run Ford's World Rally Championship team, was charged with developing the car, and it entered the new racecar this past weekend in the Gulf 12 Hours in Abu Dhabi. There, on the Yas Marina Circuit in the United Arab Emirates, the Continental GT3 diced it with GT3 versions of the likes of the Ferrari 458, Mercedes-Benz SLS AMG and McLaren 12C.
So how did it fare on its first time out? Well the race is split into two six-hour sessions, and the Conti finished third in the first heat (behind the AF Corse Ferrari and Black Falcon Benz) and fourth in the second (just edged out by another 458 entered by Kessel Racing). Not a bad outcome for Bentley's first race in a decade. And the Abu Dhabi race was essentially a dress rehearsal for next season when the Continental GT3 will be entered in the full 2014 Blancpain Endurance Series.

Bentley W12 engine production will officially end in April 2024

We knew the Bentley W12 engine had an expiration date before, but it’s going to come up even quicker than expected. Revealed today, Bentley says the last W12 engine it produces will be in April 2024. ThatÂ’s only one year and a couple of months away! Previously, Bentley made it clear that it would only sell PHEVs and EVs by 2026, implying the W12 was done for. It wonÂ’t last long enough to bump into that 2026 limit now that the 2024 production end is set. By the time its end date rolls around, Bentley will have made over 105,000 W12 engines since the 6.0-liter twin-turbocharged unit was introduced for 2003. Each of those engines was hand-built by a team of craftspeople — Bentley says each engine takes approximately 6.5 hours to complete. Which Bentley models are going to be made available with these final W12s, you ask? The real celebration for Bentley is happening with the Batur, a small run of Mulliner coach-built coupes based on the Continental GT. Final validation just wrapped up for the Batur version of the W12, and itÂ’s the most powerful yet at 740 horsepower and 737 pound-feet of torque. Versus the W12 found in other Bentley models, the Batur features reworked intake, exhaust and cooling systems along with a revised engine calibration. Unfortunately, all 18 Baturs (pic below) are already spoken for. If you still want a W12, Bentley says it has limited order slots left for the Continental GT Speed, Bentayga Speed and Flying Spur Speed. Additionally, Bentley will allow you to spec it in either the Continental GT Mulliner or Flying Spur Mulliner. No other new Bentley orders will be W12-compatible between now and production completion. The company warns that there are only a limited number of build slots left, so anyone still on the fence should act quickly if they want the W12.  Over the years, Bentley says the W12 has seen a 37% increase in power, 54% increase in torque and 25% reduction in emissions. The biggest changes came in 2015 when Bentley redesigned the engine “from the sump up” for the launch of the Bentayga SUV. As of today, there are 30 people involved in the engine assembly process. Bentley says it aims to retrain and redeploy all 30 into different positions once W12 production ceases Related video: 2024 Maserati GranTurismo walkaround