Bentley Continental Gt Mulliner 205k Msrp on 2040-cars

Auto blog

2019 Bentley Continental GT breaks Pikes Peak production car record

Bentley has made good on its promise to capture the production car record at Pikes Peak this past weekend. Pikes Peak expert Rhys Millen took a stock 2019 Bentley Continental GT (save for mandatory safety equipment) up the roughly 12-and-a-half-mile route in a time of 10:18.488 and an average speed of 70 mph. The final time was an impressive 8.4 seconds ahead of the previous record. That previous record holder was a stock 2014 Porsche 911 Turbo S driven by David Donner. That car's twin-turbo flat-6 made "just" 560 horsepower and 516 pound-feet of torque to the Bentley twin-turbo W12's 626 horsepower and 664 pound-feet of torque. Of course the Bentley is much heavier, which would be evident in a straight drag race, as the Porsche had a claimed 0-60 mph time of 2.9 seconds to the Bentley's 3.6. We're interested to see if other manufacturers will start heading to Pikes Peak in search of production class glory. In the meantime, Bentley can relish in owning not one, but two production car record times. It set the production SUV record last year with a Bentayga. The Bentayga was a little over 30 seconds slower than the Continental GT with a time of 10:49.9. Bentley set the record on Sunday, June 30, the same day that Carlin Dunne was killed in a crash while attempting to set a different record aboard a Ducati Streetfighter V4 prototype. Related Video:    

Bentley W12 engine production will officially end in April 2024

We knew the Bentley W12 engine had an expiration date before, but it’s going to come up even quicker than expected. Revealed today, Bentley says the last W12 engine it produces will be in April 2024. ThatÂ’s only one year and a couple of months away! Previously, Bentley made it clear that it would only sell PHEVs and EVs by 2026, implying the W12 was done for. It wonÂ’t last long enough to bump into that 2026 limit now that the 2024 production end is set. By the time its end date rolls around, Bentley will have made over 105,000 W12 engines since the 6.0-liter twin-turbocharged unit was introduced for 2003. Each of those engines was hand-built by a team of craftspeople — Bentley says each engine takes approximately 6.5 hours to complete. Which Bentley models are going to be made available with these final W12s, you ask? The real celebration for Bentley is happening with the Batur, a small run of Mulliner coach-built coupes based on the Continental GT. Final validation just wrapped up for the Batur version of the W12, and itÂ’s the most powerful yet at 740 horsepower and 737 pound-feet of torque. Versus the W12 found in other Bentley models, the Batur features reworked intake, exhaust and cooling systems along with a revised engine calibration. Unfortunately, all 18 Baturs (pic below) are already spoken for. If you still want a W12, Bentley says it has limited order slots left for the Continental GT Speed, Bentayga Speed and Flying Spur Speed. Additionally, Bentley will allow you to spec it in either the Continental GT Mulliner or Flying Spur Mulliner. No other new Bentley orders will be W12-compatible between now and production completion. The company warns that there are only a limited number of build slots left, so anyone still on the fence should act quickly if they want the W12.  Over the years, Bentley says the W12 has seen a 37% increase in power, 54% increase in torque and 25% reduction in emissions. The biggest changes came in 2015 when Bentley redesigned the engine “from the sump up” for the launch of the Bentayga SUV. As of today, there are 30 people involved in the engine assembly process. Bentley says it aims to retrain and redeploy all 30 into different positions once W12 production ceases Related video: 2024 Maserati GranTurismo walkaround

Bentley lays out EV and PHEV plans through 2030

Bentley has been steadily dripping details on its electrification plans through the rest of the decade. It's going fully electric and carbon neutral by 2030, and its first all-electric car is coming in 2025. Today, the company provided a few more details on its electric product rollout and how it will start phasing out internal combustion cars. That first electric car is coming toward the end of 2025, so it's probably a 2026 model year vehicle, and it's reportedly going to be an SUV. It's also just the start of a big electric push. The next five years after that car's introduction will bring another new fully electric model each year. Those electric models will probably include new generations of existing nameplates such as the Continental GT and Bentayga, but at least one, possibly the first one, will be an as-yet-unnamed machine. Furthermore, Bentley will continue building these cars at the Crewe, England, facility where it's investing 2.5 billion pounds, or nearly $3.4 billion. Until the first EV arrives, Bentley will be expanding its hybrid offerings, with a few new hybrid variants of existing models coming this year. By 2024, all Bentley models and variants will be available with a plug-in hybrid option. By 2026, all of Bentley's cars with internal combustion engines will be plug-in hybrids.