2013 Bentley Continental Gt V8 Coupe on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Ducati Diavel for Bentley is the first collaboration between the brands

Sister companies Ducati and Bentley have joined forces for the first time to create a limited-edition version of the Diavel motorcycle. Inspired by the Batur, which is also a limited-edition model, the bike stands out with an elegant design that incorporates several Bentley styling cues. Although this is the first time Bentley's winged logo appears on a Ducati, it's not the first car-themed Diavel to come out of the Italian brand's design studio; it collaborated with Lamborghini on a Sian FKP 37-inspired 1260 Diavel in November 2020. Drawing inspiration from the sold-out Batur, designers added mesh inserts and red accents to the side air intakes, edition-specific fairing made with carbon fiber, and forged wheels shaped like the ones Bentley put on its limited-edition coupe. Scarab Green paint from the Bentley palette completes the look. The rider sits on an Alcantara-upholstered seat with red accents that echoes the Batur's interior and faces a redesigned instrument cluster. Ducati notes that buyers will receive the bike in a personalized wood case along with a certificate of authenticity, a motorcycle cover, and a passenger seat. The two companies also collaborated on a range of accessories that includes a helmet and a limited-edition jacket. Fitting the Diavel with Bentley's 6.0-liter twin-turbocharged W12 engine seemingly wasn't an option, so power comes from a stock, 1.2-liter V4 rated at 168 horsepower and 93 pound-feet of torque. If neither figure sounds impressive, keep in mind the standard Diavel weighs 520 pounds. Put another way, its power-to-weight ratio approaches that of a Bugatti Chiron. It's the two-wheel equivalent of a supercar. Ducati will build 500 units of the Diavel for Bentley. If that's not rare enough, it will make 50 additional examples of a version named Diavel for Bentley Mulliner that's reserved for Bentley customers. They'll notably have a broader scope of customization options to choose from. Featured Gallery Ducati Diavel for Bentley View 29 Photos Design/Style Bentley Motorcycle Luxury Performance

Bentley plotting Mulsanne performance model for Paris debut

Between three distinct body styles and numerous engine specifications, Bentley has made more versions of the Continental over the years than we would care to count. But one thing it has, by and (very) large left alone is the Mulsanne. Sure, it's done some special editions and some extra equipment packages - it's even toyed with the idea of a two-door convertible version - but at the end of the day, the Mulsanne soldiers on as a four-door sedan with one engine and one engine alone. That may be about to change, however.
Fueled by ambiguous pronouncements from Bentley's returning chief Wolfgang Dürheimer, rumors from the UK suggest that the Flying B marque is preparing a more performance-focused version of the Mulsanne to debut at the Paris Motor Show this October.
Details are few and far between, but we'd expect the Mulsanne's long-serving 6.75-liter V8 engine to be further tuned beyond its current specification of 505 horsepower and 752 pound-feet of torque, accompanied by a stiffer suspension, bigger brakes and other upgrades. Historically Bentley would turbocharge the Mulsanne's predecessors (to turn the 90s-era Brooklands, for instance, into the Turbo R), but the Mulsanne's engine is already spooled up, so the British automaker will likely have to massage the extra muscle out another way.