2010 Bentley Continental Gtc Speed Convertible Low Miles on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

The 2020 Bentley Flying Spur has 3-D wood now, and it looks spectacular

This is the coolest wood you’re going to see today. We promise. Bentley is now manufacturing something it calls “Three-Dimensional Wood.” And yes, all wood we come into contact with is 3-D, but this stuff pops out at you like people and items do in a 3-D movie. YouÂ’ll find it in the rear door inserts of the Bentley Flying Spur, assuming the owner checked the box. One look at the photos will have you going, “how the Â… ?” Yes, itÂ’s pretty wild to see, and we can imagine the effect it has in person is even stronger. Bentley did explain how it made wood look like the diamond-quilted leather it uses in its seats, though. As one would expect from Bentley, itÂ’s a hell of a process.  Each rear door and quarter panel is crafted out of a single block of wood. Bentley uses either American Walnut or American Cherry timber. They start by machining the back of the log to match a die-cast aluminum door panel template. ItÂ’s bonded to the template, and then the difficult work begins. Skilled craftspeople carve the wood to its three-dimensional surface with a multi-axis routing machine to a tolerance of 0.1 mm. They then hand finish the cuts to achieve perfect results. Finally, a lacquer is applied to attain the color and texture that Bentley desires. Left: EXP 10 Speed 6 Concept; Right: Production Flying Spur pattern This design of wood was first seen in a Bentley concept from 2015. It was called the Bentley EXP 10 Speed 6 (shown above, left). After the positive reaction to that design, Bentley says it felt a production adaptation was in order.  “Three-Dimensional Wood is the next interior design element weÂ’ve taken from concept car idea to production reality,” Brett Boydell, Head of Interior Design for the Flying Spur said. “It works in perfect harmony with the three-dimensional leather quilting across the cabin of the Flying Spur and creates an even more special environment for those being driven.” If you were to count the number of carved diamonds in the wood, youÂ’d come to a total of 150 in the Flying Spur. As of now, the big sedan is the only Bentley this option is available in. We wouldnÂ’t be surprised if it expanded to others in the future. In addition to that, this is a design that could be translated into lesser luxury cars using cheaper processes and 3-D printing. Bring on the 3-D wood. Related Video:    

Audi CEO's Dieselgate arrest threatens fragile truce among VW stakeholders

FRANKFURT — The arrest and detention of Audi's chief executive forces Volkswagen Group's competing stakeholders to renegotiate the delicate balance of power that has helped keep Audi CEO Rupert Stadler in office. Volkswagen's directors are discussing how to run Audi, its most profitable division, following the arrest of the brand's long-time boss on Monday as part of Germany's investigations into the carmaker's emissions cheating scandal. The supervisory board of Audi, meanwhile, has suspended Stadler and appointed Dutchman Bram Schot as an interim replacement, a source familiar with the matter said on Tuesday. Schot joined the Volkswagen Group in 2011 after having worked as president and CEO of Mercedes-Benz Italia. He has been Audi's board member for sales and marketing since last September. The discussions risk reigniting tensions among VW's controlling Piech and Porsche families, its powerful labor representatives and its home region of Lower Saxony. VW has insisted the development of illegal software, also known as "defeat devices," installed in millions of cars was the work of low-level employees, and that no management board members were involved. U.S. prosecutors have challenged this by indicting VW's former chief executive Martin Winterkorn. Stadler's arrest raises further questions. Audi and VW said on Monday that Stadler was presumed innocent unless proved otherwise. Munich prosecutors detained Stadler to prevent him from obstructing a probe into Audi's emissions cheating, they said on Monday. Stadler is being investigated for suspected fraud and false advertising. Here are the main factors deciding the fate of Audi. Background: Audi's role in Dieselgate Volkswagen Group was plunged into crisis in 2015 after U.S. regulators found Europe's biggest carmaker had equipped cars with software to cheat emissions tests on diesel engines. The technique of using software to detect a pollution test procedure, and to increase the effectiveness of emissions filters to mask pollution levels only during tests, was first developed at Audi. "In designing the defeat device, VW engineers borrowed the original concept of the dual-mode, emissions cycle-beating software from Audi," VW said in its plea agreement with U.S. authorities in January 2017, in which the company agreed to pay a $4.3 billion fine to reach a settlement with U.S. regulators.