2009 Bentley Continental Gt on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Bentley Mulliner Bacalar is so bespoke, it's a whole different car

Bentley talks a lot about “bespoke” — the customized elements done at the hands of its Mulliner division — but the newly unveiled Bentley Mulliner Bacalar takes the idea to a new level. This isnÂ’t just a unique paint color or a special upholstery fabric or a fabricated housing for an ownerÂ’s pet ferret. ItÂ’s a completely custom-bodied automobile, one that transforms the Continental GT convertible into a restyled two-seat roofless barchetta, which takes its name from a lake in MexicoÂ’s Yucatan Peninsula. Bentley claims that not a single exterior body panel from the Continental GT remains unchanged on the Bacalar, and the design is said to be inspired by last yearÂ’s EXP 100 GT concept. That show car was a coupe with scissor doors and an electric powertrain. The Bacalar is none of those things. But you can see some rub-off from the EXP 100 GT in the detailing, such as the horizontal lighting elements at the front and the rear. This example wears special Yellow Flame paint that incorporates the ash from burned rice husks as a more environmentally friendly way to create a metallic effect. In the Bentley Mulliner Bacalar, the doors and fenders are made from carbon fiber, while the clamshell covering over the rear compartment is aluminum. The body panels feature additional air intakes, a double hump behind the front seats, and more pronounced rear haunches over the 20-mm wider rear track. There is no roof — presumably owners will drive one of their dozens of other cars if rain is predicted. It would be a shame, after all, to let this interior get wet. The BacalarÂ’s cabin has just two seats, with a carved-out luggage hold behind each one that is specially designed to fit custom-matched bags made by Italian luggage maker Shedoni. The reworked center console angles up to meet the dash, which contains BentleyÂ’s Rotating Display and a digital instrument cluster that differs from that of production Bentleys. The seats are upholstered in British wool together with two types of leather, and the wool elements also appear on the console and door panels. The wood trim — in both matte and gloss finishes — is sourced from 5,000-year-old trees harvested from rivers, lakes and peat bogs. The 6.0-liter twin-turbocharged W-12 engine is massaged to the tune of 650 horsepower and 667 lb-ft of torque (versus 626 ponies and 664 lb-ft in the Conti GT). The W-12 is paired with an eight-speed dual-clutch automatic transmission and rear-biased all-wheel drive.

$10,000 champagne bottle cooler? Only in a Bentley

Bentleys are expensive. They wouldn't be Bentleys if they weren't. Even so, the ~$200k list price for a new Flying Spur is just the starting point. The company's Mulliner customization division offers a wide array of optional extras – all of them suitably pricey – and just introduced a new selection for the sedan. Highlighting the options list for the Continental's sedan counterpart is a champagne bottle cooler mounted between the rear seats behind the armrest. The on-board mini-fridge fits two standard-size champagne bottles – no magnums, we're afraid – canted forward, as well as a stopper and a pair of flutes with bases designed to evoke the shape of the wheels outside. It all fits in behind frosted glass trimmed in chrome, just in case it wasn't blingy enough for the hip-hop set, and takes Bentley's craftsmen 15 hours to make. No wonder the company charges $10,135 for each one installed, which comes within a Bentley buyer's pocket change of a new Nissan Versa. The manufacturer does not typically "disclose to the public prices for bespoke features," Bentley spokesperson Erin Bronner told Autoblog, "as these are private commissions" and pricing varies from region to region. But the options list, as you might have guessed, does not start and end with the wine cooler. It also includes specially painted veneer panels, quilted stitching, scent atomizers in Stirling silver, and a leather-trimmed storage compartment for jewelry. Related Video: BESPOKE MULLINER FEATURES MAKE DEBUT IN FLYING SPUR - New range of Mulliner bespoke features available in Flying Spur - Refrigerated bottle cooler, sterling silver atomisers and painted veneers now offered - Mulliner specialist coach-building division brings Bentley customers' visions to life - Bentley Flying Spur combines class-leading refinement with effortless performance (Crewe, 01 February 2016) Mulliner, Bentley's in-house coach-building division, is revealing its latest range of bespoke creations for the Flying Spur, enabling customers to personalise the four-door luxury sedan to an even higher level. For the first time, the Flying Spur can now be specified with a refrigerated bottle cooler between the rear seats, painted veneers, Mulliner quilted leather, sterling silver atomisers and hide-trimmed stowage boxes.