Black W/ Gray Interior-6,896 Miles/1 Owner-stored In Az-now Garaged In Ny on 2040-cars

Auto blog

First new Bentley Blower built since 1930 is now being tested

Just over a year after announcing the program, Bentley has finished building its first Blower car since 1930. It's called "Car Zero" since it's not one of the 12 customer cars. Instead, this first car is a prototype that will undergo testing before the customer cars begin production. Bentley says this car took 40,000 hours to complete. The company figured out how to build it based on existing tooling and blueprints, as well as laser scans of the components in the company's 1929 race car on which the continuation models will be based. The company collaborated with a variety of outside companies for help with the frame, radiator shroud and leaf springs. The frame was built by a company that builds and restores boilers for steam engines. Bentley itself also built a custom stand so it could hook up the recreated 4.5-liter supercharged four-cylinder to its modern-day engine dynamometers for break-in. Now that this prototype has been completed, Bentley will begin testing it for durability. The planned testing should recreate just under 22,000 miles of regular driving and nearly 5,000 miles of track driving. The company will also do a top speed run with it. Once testing is complete, Bentley will start building the 12 customer cars, all of which have been sold and specified. While many are likely excited about this new Bentley, there are a handful of car enthusiasts that probably don't share the excitement. Earlier this year, several of these wealthy enthusiasts, including fashion mogul Ralph Lauren, sent a letter to Bentley expressing concerns that these continuation cars will reduce the value, both monetary and intrinsic, of the original cars. The complaint obviously hasn't had an effect on Bentley's plans. Related Video:

Bathurst 12-hour gallery is GT3 heaven [w/video]

The 2015 Liqui-Moly Bathurst 12-Hour race was run this weekend at the Mt. Panorama Circuit in Bathurst, Australia. Race photographer Joel Strickland sent us a huge batch of photos, all of which make us salivate for the switch to GT3 rules in the United SportsCar Championship; the top seven finishers at Bathurst were of seven different makes: Nissan GT-R NISMO GT3, Audi R8-LMS Ultra, Aston Martin Vantage GT3, Bentley Continental GT3, Mercedes SLS AMG GT3, Ferrari F458 Italia and Lamborghini Gallardo. It was a sweet victory for the No. 35 car driven by the NISMO Athlete Global Team after it crashed in Saturday qualifying, and then was only in third place on the penultimate lap. The three-man driving team included two GT Academy winners, one of whom, Florian Strauss, has only been a professional race car driver for 18 months. It's the first time the GT-R has won at Panorama since the original R32 "Godzilla" took back-to-back wins in 1991 and 1992. Second place went to the No. 15 Phoenix Racing Audi R8-LMS Ultra, 2.4 seconds behind the winners, third to the Craft Bamboo Racing Aston Martin Vantage not even half a second behind the Audi. The Bentley Motorsport team, in its first Bathurst 12-Hour with two cars, had its No. 10 Continental GT3 in the lead until the penultimate lap and in second place until the final corner, but crossed the line in fourth after some rubbin'-is-racin' action from chasers. And if pictures aren't enough, as of writing you can still watch the live stream of the entire race at the Bathurst 12-Hour site. Or, if you don't have the time, at least be sure to check out the last five minutes, below. Enjoy. Featured Gallery 2015 Liqui-Moly Bathurst 12-Hour View 118 Photos Image Credit: Copyright 2015 Joel Strickland / AOL Motorsports Aston Martin Audi Bentley Nissan Coupe Racing Vehicles Videos aston martin vantage gt3

2023 Bentley Flying Spur Speed keeps the W12 alive with 626 horsepower

Bentley has expanded the Flying Spur range with a performance-oriented variant appropriately called Speed. The sedan stands out from other members of the Flying Spur lineup with a powerful W12 engine between its fenders, a firmer chassis setup, and a specific design. The company has traditionally reserved the "Speed" designation for its driver-focused models, and the Flying Spur lives up to this badge with a 6.0-liter W12 engine that's twin-turbocharged to develop 626 horsepower and 664 pound-feet of torque. In comparison, the next model down is the Flying Spur S, which uses a 4.0-liter, twin-turbocharged V8 rated at 542 horsepower and 568 pound-feet of torque. Bentley pegs the Speed's zero-to-60-mph time at 3.7 seconds, and the big sedan doesn't stop accelerating until its speedometer displays 207 mph. An eight-speed automatic transmission transfers the 12-cylinder's output to the four wheels via a rear-biased all-wheel-drive system, and reaching the Speed's top speed requires leaving the gearbox in sixth. Seventh and eighth are overdrive gears used to keep the engine's revolutions relatively low at higher speeds. Four-wheel steering, Torque Vectoring by Brake technology, and the 48-volt Bentley Dynamic Ride system help drivers make the most of the extra power. Massive brakes are found on the list of standard features as well. Visually, the Speed gains black exterior trim, "Speed" emblems on the lower part of the fenders, and model-specific 22-inch wheels. Buyers have several options to choose from, including the Styling Specification and Blackline Specification packages. Inside, the Speed features Dinamica Pure upholstery, a redesigned instrument cluster, sport pedals, 24-way power-adjustable front comfort seats, and 14-way power-adjustable rear seats. Both rows of seats are heated, ventilated, and equipped with a massage function; Bentley argues that performance and comfort aren't mutually exclusive. Piano Black trim comes standard but other types of wood (like Crown Cut Walnut) are no-cost options. Pricing information for the 2023 Bentley Flying Spur Speed hasn't been released yet.