Bentley Continental Flying Spur on 2040-cars

Auto blog

Bentley debuts the first Bentayga Hybrid in Geneva

Transcript: Bentley unveils the "world's first" luxury hybrid. Bentley revealed the Bentayga Hybrid at the 2018 Geneva International Motor Show. This is Bentley's first step toward eventually going fully electric. The Bentley Bentayga Plug-in Hybrid will include a turbocharged 3.0-liter V6 engine and the "E Motor." The E Motor acts as a generator and electric motor with 3 E Modes: EV Drive, Hybrid Mode, and Hold Mode. It has an electric range of 31 miles with a charge time of 2.5 hours using an industrial connection. Or 7.5 hours using domestic household sockets. The Bentayga Hybrid will also include: traffic sign recognition, rear crossing traffic warning, top view, a 360 view of your surroundings, and park assist detection. What do you think of Bentley entering the electric world? The luxury automaker Bentley unveiled its first ever Bentayga Hybrid SUV at the 2018 Geneva International Motor Show. It's Bentley's first step into going fully electric. The 'E Motor' in the vehicle will provide an electric range of 31 miles with a charging time of 2.5 hours using an industrial connection. Want more coverage of the 2018 Geneva International Motor Show? Head over to www.autoblog.com/geneva-motor-show Green Geneva Motor Show Bentley Hybrid Autoblog Minute Videos Original Video

Bentley W12 engine production will officially end in April 2024

We knew the Bentley W12 engine had an expiration date before, but it’s going to come up even quicker than expected. Revealed today, Bentley says the last W12 engine it produces will be in April 2024. ThatÂ’s only one year and a couple of months away! Previously, Bentley made it clear that it would only sell PHEVs and EVs by 2026, implying the W12 was done for. It wonÂ’t last long enough to bump into that 2026 limit now that the 2024 production end is set. By the time its end date rolls around, Bentley will have made over 105,000 W12 engines since the 6.0-liter twin-turbocharged unit was introduced for 2003. Each of those engines was hand-built by a team of craftspeople — Bentley says each engine takes approximately 6.5 hours to complete. Which Bentley models are going to be made available with these final W12s, you ask? The real celebration for Bentley is happening with the Batur, a small run of Mulliner coach-built coupes based on the Continental GT. Final validation just wrapped up for the Batur version of the W12, and itÂ’s the most powerful yet at 740 horsepower and 737 pound-feet of torque. Versus the W12 found in other Bentley models, the Batur features reworked intake, exhaust and cooling systems along with a revised engine calibration. Unfortunately, all 18 Baturs (pic below) are already spoken for. If you still want a W12, Bentley says it has limited order slots left for the Continental GT Speed, Bentayga Speed and Flying Spur Speed. Additionally, Bentley will allow you to spec it in either the Continental GT Mulliner or Flying Spur Mulliner. No other new Bentley orders will be W12-compatible between now and production completion. The company warns that there are only a limited number of build slots left, so anyone still on the fence should act quickly if they want the W12.  Over the years, Bentley says the W12 has seen a 37% increase in power, 54% increase in torque and 25% reduction in emissions. The biggest changes came in 2015 when Bentley redesigned the engine “from the sump up” for the launch of the Bentayga SUV. As of today, there are 30 people involved in the engine assembly process. Bentley says it aims to retrain and redeploy all 30 into different positions once W12 production ceases Related video: 2024 Maserati GranTurismo walkaround

2024 Bentley Edition 8 models signal time's up for the gas-only V8

Bentley might still be bidding its W12 engine goodbye with various swansong vehicles, but now it’s the 4.0-liter twin-turbo V8Â’s turn to say adieu. At least in the Continental and Flying Spur models – the Bentayga will continue on with this powertrain for an unspecified amount of time. We donÂ’t have a hard cutoff in North America for the V8, but Bentley says production of its final 4.0-liter twin-turbo V8 cars in Europe, the UK and the Middle East is to be completed soon with final deliveries in June. North America “will follow later.” Before you hop straight to the comments, know this doesnÂ’t mean Bentley is abandoning the V8 entirely. It announced alongside this news that an “all-new” V8 plug-in hybrid powertrain is on the horizon and will serve as the companyÂ’s flagship offering, technically replacing the W12. Output is pegged at 740 horsepower with this model, and all-electric range from the battery pack is estimated at 50 miles on the WLTP drive cycle – expect notably fewer miles of range in EPA testing. ThatÂ’s all we know today, but Bentley says more will be revealed in time As for what will replace the soon-to-be-retired gas-only V8 option, Bentley suggests hybrid powertrains would be used and that all of its model lines would offer a hybrid variant by 2024. The only model without a hybrid available yet is the Continental, so expect an announcement concerning that car imminently.  To celebrate the end of the current V8Â’s era, Bentley put together “Edition 8” versions of its Flying Spur, Continental GT and Continental GTC. ItÂ’s a North America-special and comes with lots of Mulliner options as standard equipment. The Continental models feature Edition 8 badges on their fenders, while the Flying Spur wears it on its D pillar. An Edition 8 motif can be seen embroidered on the seat backs and engraved on the treadplates, too. One particularly notable luxury touch is the Palm Fluting pattern (seen in the photo above) on its sumptuous seats, which Bentley says it has never offered on any of its core/mainstream models before. Deliveries of the Edition 8 will begin “imminently,” so if youÂ’re a particularly big fan of BentleyÂ’s current V8 and have money to spend, now is the time. Related Video