2006 Bentley Continental Flying Spur, Great Service History, Carfax Cert! on 2040-cars

Auto blog

Pebble Beach Concept Car Lawn adds class to the grass

While Pebble Beach is traditionally thought of as the refuge of the pristine and pricey vintage vehicles of the world, there's no shortage of newer vehicles on display. And when we say "new," we mean really new. As in, not even in production new. This is the concept car lawn, and it's home to an eclectic group of vehicles from past and present.
Of course, calling it the "concept car lawn" is a bit of a misnomer this year (as it has been in previous years, too). Production models like the Alfa Romeo 4C were on display, alongside known quantities like the Hennessy Venom GT and modified versions of already-on-sale models, like the Rolls-Royce Phantom Drophead Waterspeed Collection.
There were a few concepts on display, though. Toyota debuted the critically acclaimed FT-1 Concept in a new shade, while BMW's Beijing Motor Show stunner, the Vision Future Luxury, was also parked on the expensive grass. Also appearing were the Nissan GT-R in sheep's clothing, the Infiniti Q50 Eau Rouge, and the recently debuted McLaren P1 GTR.

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

2021 Bentley Flying Spur V8 returns with less weight, equipment than W12

Following up on the launch of the W12 version, the 2021 Bentley Flying Spur is once again getting an "entry-level" variant with a V8. It's not as powerful as the W12, and a couple fancy features aren't included. But it's lighter, more fuel efficient, and we expect it will be cheaper. Like past V8 Spurs, this new model has a twin-turbocharged 4.0-liter V8. It's more powerful than its predecessors, though, making 542 horsepower and 568 pound-feet of torque. The previous-generation V8 S made 521 horsepower and 502 pound-feet of torque. The W12's 626 horsepower still towers over the V8, but the V8 boasts a weight savings of 220 pounds. Combined with cylinder deactivation, Bentley claims a 16% improvement in fuel economy, though doesn't give specific numbers. Applying that increase to the W12's combined fuel economy number, we'd expect around 17 mpg for the V8 versus 15 for the W12. There's one other key mechanical change to the Flying Spur V8, and that's the lack of standard electronic adjustable anti-roll bars and four-wheel steering. Both features are part of an option package now, whereas they're included on the W12. The adjustable anti-roll bars are automatically controlled to optimize ride quality while reducing body roll, and the steering allows the Flying Spur to more easily negotiate tight corners and spaces. Otherwise, the V8 Flying Spur is nearly identical to the W12 version, save for the standard 20-inch wheels and quad exhaust tips. It's available in either four- or five-seat configurations. First Edition and Blackline trims are available that include extra options and unique visual tweaks. And among some of the more opulent upgrades are the rear-seat refrigerator, illuminated Flying B hood ornament and rotating center stack display. Pricing for the Flying Spur V8 starts at $200,725 with destination, a healthy discount to the W12's nearly $215,000 price tag. It's also more affordable than the the Continental GT V8's price of around $204,000. The V8 Flying Spur will be available early next year. Related Video: