20 Chrome Wheels Super Clean Car Loaded Black/black Low Miles on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

2017 Bentley Mulsanne Speed First Drive

You can hear it loud and clear – that is, the sound of nearly nothing at all – when hurtling along at 160 mph. The quiet part isn't surprising; after all, this is a $300,000 ubersedan. But the speed? The sensation is disarming and utterly intriguing. It's safe to say that three tons of mass have no right to move through space so effortlessly. Welcome to the latest ultraluxe, four-wheeled hyperloop from Bentley. In case you missed the engraved announcement, the Mulsanne is the higher-priced, handcrafted flagship that plays big brother to the Flying Spur, the (relatively) more ubiquitous sedan that shares a good amount of parts with the Continental GT. Imagine the snooty older sibling that studied at Wharton, wears tailored suits to breakfast and an ascot to supper, and dangles a pipe from the corner of his mouth, and you've got a good idea of what distinguishes the more finely finished Mulsanne from its stablemate. Not only does a base Mulsanne command a $100,000 premium over the Spur, it's a more laboriously assembled specimen that takes a staggering 400 man-hours to build. Unlike the Spur, whose top model boasts a W12, the Mulsanne is powered by a 6.75-liter pushrod (!) V8. Less is usually less in this stratospheric segment, but this humungous eight-cylinder has a history stretching back six decades – precisely the sort of tweedy legacy stuff that appeals to old money. This is the last Bentley to use this engine, and it will be replaced by a new twelve-cylinder. For 2017, the big, bad platform reaps its first significant series of updates since its 2009 debut (the Speed variant was introduced 18 months ago). Upgrades to the Mulsanne were focused on refinement, among them a smoother ride, revised styling, an updated interior, and yes, a quieter cabin. Despite its undercurrents of old-world opulence, the Mulsanne's face has been modernized with flusher features, LED headlamps, and a wider grille. Though it retains the delightfully anachronistic Flying B hood ornament, the winged capital letter can now be ordered in a refreshingly modern smoked black hue. Mean. Revisions at the rear include a redesigned bumper and subtle Bs incorporated into the tail lamps. Inside, new seats with revised foam offer greater comfiness. Perhaps more notably, the infotainment system gains a much-needed upgrade with an 8-inch touchscreen, a 4G LTE WiFi hotspot, and Apple Carplay functionality (for front passengers).

Check out King Charles III's $17.6 million car collection

King Charles III's coronation will take place in England on May 6, and being crowned a monarch comes with a long list of perks with four wheels. He will gain full access to the Royal Family's fleet of cars, which is valued at about GBP14 million (approximately $17.6 million). The two most expensive cars in the collection are nearly identical: they're a pair of Bentley State Limousine models (pictured) built for Queen Elizabeth II, King Charles III's mother, in 2002. Only two units were made, and they're both part of the Royal Family's fleet, so they're difficult to put a value on; it's not like one is going to end up listed on your favorite auction site anytime soon. British company Nationwide Vehicle Contracts, which compiled the list, estimates that each armored, 245-inch long sedan is worth at least GBP10,000,000 (roughly $12.6 million). Dropping below the eight-digit threshold, the second-most-valuable car in the Royal Family's fleet isn't really a car. It's the Gold State Coach, which Matchbox recently released a 1/64-scale replica of, and its value is estimated at GBP1.6 million (about $2 million). At 275 inches long it's even bigger than the Bentley limousine and it weighs about 9,000 pounds. It's 261 years old and designed to be pulled by eight horses, and has been part of every coronation since 1831. The rest of the Royal Family's vehicles are relatively mundane. There's a 1965 Aston Martin DB6 Volante that Queen Elizabeth II and her husband, Prince Phillip, bought for King Charles III on his 21st birthday. It's worth GBP1 million (about $1.2 million). The collection also includes a Rolls-Royce Phantom VI (about $627,000), a Bentley Bentayga (about $201,000), a Land Rover Range Rover long-wheelbase Landaulet ($133,000), a Jaguar XE (about $41,000), and a Land Rover Defender ($38,000). "Luxury cars have long been associated with the monarch and King Charles III, in particular, is known for his fondness of motor vehicles. His impressive collection features sentimental value with motors passed down from his late mother, Queen Elizabeth II, to cars bought for him by his parents," explained Keith Hawes, the director of Nationwide Vehicle Contracts, in an interview with CBS News. Being at the head of a car-making nation's royal family also comes with drawbacks: Every vehicle in King Charles III's fleet is British.