1 Owner; Save $52,000 Off Msrp; Original Msrp $252,705; Rear Seat Entertainment on 2040-cars

Auto blog

Bentley Grand Convertible is grand, is a convertible

What you see above is the Bentley Grand Convertible, live from the Los Angeles Auto Show. It's basically a droptop version of the Mulsanne Speed, which would seem to be a foregone conclusion for production, but apparently isn't, according to Bentley Chairman and CEO, Wolfgang Dürheimer.
"We are eagerly awaiting the response of our customers to this car. We will ensure that this car - if it reaches the roads - will be a highly exclusive, extremely limited collector's piece."
With its production possibilities out of the way, and with the image gallery you see above proving that it is, indeed, a convertible, we can move on to what makes this Grand Convertible so grand. Equipped with the same 6.75-liter engine with 530 horsepower and 811 pound-feet of torque as its hardtop brethren, it certainly won't be lacking for power. The Grand Convertible has been "fashioned entirely by hand from the very finest materials," says Bentley, and the tonneau is made from the largest piece of wood veneer ever applied by the automaker.

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Bentley Continental GT3 Pikes Peak car's wheel can be used for games

As video games become ever more realistic, the lines between driving real cars and their virtual counterparts gets blurrier. And that line is at its blurriest with the steering wheel used in the Bentley Continental GT3 Pikes Peak race car. Not only is it a wheel for the race car, but it can be used for playing racing simulators, too. Bentley collaborated with video game steering wheel manufacturer Fanatec to make the unit for the Pikes Peak racer. It's impressive simply as a car wheel, as it's made from magnesium and carbon fiber. The grips are covered in Alcantara, including the removable lower section designed to give the driver more leverage around hairpins. The rotary switches are CNC-machined aluminum with Bentley's knurling design. In the middle of it all are LED rpm indicators and a 3.4-inch circular display that shows current gear selection and driver settings. But a quick disconnect from the Bentley's steering column, and wheel can be carried over to a Fanatec steering wheel base and reconnected for virtual fun. In this setup, the screen can show various in-game telemetry and information, and the buttons can be programmed for various functions. Though availability and pricing haven't been announced, you'll be able to purchase your own example of this wheel. Considering the materials and functionality, it will probably be quite pricey, but certainly one of the more unique and usable automotive collectibles ever created. Even if you don't want to use it for video games, it comes with a stand that turns it into a display piece, and the center screen can act as a watch or show map and telemetry from laps of race tracks. We suspect you could also use it as an actual steering wheel in a car, assuming you have a compatible quick release. Though, depending on the car, you might not be able to use all the switches, paddles or even the screen. Still, it would be cool and probably a quality piece. Related Video: