07 Bentley Continental Flying Spur Turbo 6l W12 60v Automatic Awd Sedan Premium on 2040-cars

Auto blog

2021 Bentley Bentayga V8 First Drive | Not messing with success

The 2021 Bentley Bentayga V8 marks the first refresh for Bentley’s first and rather successful SUV. The company has sold more than 20,000 of them worldwide since its introduction just a few years ago. As such, Bentley didnÂ’t need to do much to keep it updated, nor did it. The refresh boils down to exterior and interior updates, and after spending some time with the updated Bentayga, it continues to be a brilliantly luxurious machine with impressive capability. The most obvious and significant changes are to the exterior styling, which has hardly been the Bentayga's strong point. There are new round headlights with a cut crystal design like on other recent Bentleys. The grille has been enlarged, and the front bumper has a sportier design with an integrated spoiler. On the side, the fender vent has been lengthened and mounted higher, while the rear now has slim oval taillights and oval exhaust outlets. Those taillights have the same kind of cut crystal design as the headlights. The changes are subtle but effective at sprucing up the Bentayga, but they also donÂ’t make existing Bentaygas look out of date. ItÂ’s a similar situation inside. The biggest changes are in the center of the dashboard. The upper air vents are thin and horizontal instead of circles, and they've been relocated with the dash clock to sit mostly on top of the dash instead of nestled into it. Below them is a larger, 10.9-inch infotainment system that spans the whole width of the center stack and looks better integrated than the old version. The back seats can be configured to have nearly 4 inches more legroom, and thereÂ’s a larger touchscreen remote and available rear air vents for the bench seat configuration. Beyond that, the interior is mostly the same, which is hardly a complaint. This is a Bentley, after all. Essentially every surface is wrapped in soft leather, adorned with rich wood trim or made of weighty knurled metal. And customers have access to a vast variety of colors and combinations to create a genuinely custom cabin. There are a few low-ish points. The infotainment system isnÂ’t the most responsive, and it can be a little tricky to find the menu you want. Also, and this is a bit of a car journalist nitpick, you can spot some bits pilfered from the Audi parts bin: the turn signal and washer stalks, the headlight knob, and the underlying menus and layout of the instrument panel.

Bentley releases new details on Continental GT3 racer

Porsche's new LMP1 Prototype isn't the only motorsports news coming out of Volkswagen AG this week. After unveiling its new Continental GT3 at the Paris Motor Show last year, Bentley has released some new images and details as this racecar continues its development. Similar to the Porsche announcement, Bentley's new GT3 marks a significant return to motorsports, only in this case, Bentley hasn't raced a car since 2003 - a winning effort at the 24 Hours of Le Mans.
From street to race form, the Continental has dropped about 2,200 pounds by shedding many of the luxury and tech features that make the street-legal Continental GT the car that it is - including 50(!) electronic control units. The Continental GT3 uses the same 4.0-liter, twin-turbo V8 as the road car, but we're guessing output has been tweaked a bit from the standard 500 horsepower. Except for the carbon fiber hood, decklid and doors, Bentley says that the body of the GT3 is a direct carryover from the Continental GT.
Inside, even a stripped interior and full roll cage won't stop Bentley from being Bentley as it gives this racecar the same attention to detail as its road cars - the seats, steering wheel and door pulls all receiving the hand-crafted treatment from the factory in Crewe. There is no word as to when the Continental GT3 will make its racing debut, but more details about the car can be found below in the official press release.

The 2020 Bentley Flying Spur has 3-D wood now, and it looks spectacular

This is the coolest wood you’re going to see today. We promise. Bentley is now manufacturing something it calls “Three-Dimensional Wood.” And yes, all wood we come into contact with is 3-D, but this stuff pops out at you like people and items do in a 3-D movie. YouÂ’ll find it in the rear door inserts of the Bentley Flying Spur, assuming the owner checked the box. One look at the photos will have you going, “how the Â… ?” Yes, itÂ’s pretty wild to see, and we can imagine the effect it has in person is even stronger. Bentley did explain how it made wood look like the diamond-quilted leather it uses in its seats, though. As one would expect from Bentley, itÂ’s a hell of a process.  Each rear door and quarter panel is crafted out of a single block of wood. Bentley uses either American Walnut or American Cherry timber. They start by machining the back of the log to match a die-cast aluminum door panel template. ItÂ’s bonded to the template, and then the difficult work begins. Skilled craftspeople carve the wood to its three-dimensional surface with a multi-axis routing machine to a tolerance of 0.1 mm. They then hand finish the cuts to achieve perfect results. Finally, a lacquer is applied to attain the color and texture that Bentley desires. Left: EXP 10 Speed 6 Concept; Right: Production Flying Spur pattern This design of wood was first seen in a Bentley concept from 2015. It was called the Bentley EXP 10 Speed 6 (shown above, left). After the positive reaction to that design, Bentley says it felt a production adaptation was in order.  “Three-Dimensional Wood is the next interior design element weÂ’ve taken from concept car idea to production reality,” Brett Boydell, Head of Interior Design for the Flying Spur said. “It works in perfect harmony with the three-dimensional leather quilting across the cabin of the Flying Spur and creates an even more special environment for those being driven.” If you were to count the number of carved diamonds in the wood, youÂ’d come to a total of 150 in the Flying Spur. As of now, the big sedan is the only Bentley this option is available in. We wouldnÂ’t be surprised if it expanded to others in the future. In addition to that, this is a design that could be translated into lesser luxury cars using cheaper processes and 3-D printing. Bring on the 3-D wood. Related Video: