1993 Bentley Brooklands on 2040-cars

Auto blog

First new Bentley Blower built since 1930 is now being tested

Just over a year after announcing the program, Bentley has finished building its first Blower car since 1930. It's called "Car Zero" since it's not one of the 12 customer cars. Instead, this first car is a prototype that will undergo testing before the customer cars begin production. Bentley says this car took 40,000 hours to complete. The company figured out how to build it based on existing tooling and blueprints, as well as laser scans of the components in the company's 1929 race car on which the continuation models will be based. The company collaborated with a variety of outside companies for help with the frame, radiator shroud and leaf springs. The frame was built by a company that builds and restores boilers for steam engines. Bentley itself also built a custom stand so it could hook up the recreated 4.5-liter supercharged four-cylinder to its modern-day engine dynamometers for break-in. Now that this prototype has been completed, Bentley will begin testing it for durability. The planned testing should recreate just under 22,000 miles of regular driving and nearly 5,000 miles of track driving. The company will also do a top speed run with it. Once testing is complete, Bentley will start building the 12 customer cars, all of which have been sold and specified. While many are likely excited about this new Bentley, there are a handful of car enthusiasts that probably don't share the excitement. Earlier this year, several of these wealthy enthusiasts, including fashion mogul Ralph Lauren, sent a letter to Bentley expressing concerns that these continuation cars will reduce the value, both monetary and intrinsic, of the original cars. The complaint obviously hasn't had an effect on Bentley's plans. Related Video:

2023 Bentley Flying Spur Speed keeps the W12 alive with 626 horsepower

Bentley has expanded the Flying Spur range with a performance-oriented variant appropriately called Speed. The sedan stands out from other members of the Flying Spur lineup with a powerful W12 engine between its fenders, a firmer chassis setup, and a specific design. The company has traditionally reserved the "Speed" designation for its driver-focused models, and the Flying Spur lives up to this badge with a 6.0-liter W12 engine that's twin-turbocharged to develop 626 horsepower and 664 pound-feet of torque. In comparison, the next model down is the Flying Spur S, which uses a 4.0-liter, twin-turbocharged V8 rated at 542 horsepower and 568 pound-feet of torque. Bentley pegs the Speed's zero-to-60-mph time at 3.7 seconds, and the big sedan doesn't stop accelerating until its speedometer displays 207 mph. An eight-speed automatic transmission transfers the 12-cylinder's output to the four wheels via a rear-biased all-wheel-drive system, and reaching the Speed's top speed requires leaving the gearbox in sixth. Seventh and eighth are overdrive gears used to keep the engine's revolutions relatively low at higher speeds. Four-wheel steering, Torque Vectoring by Brake technology, and the 48-volt Bentley Dynamic Ride system help drivers make the most of the extra power. Massive brakes are found on the list of standard features as well. Visually, the Speed gains black exterior trim, "Speed" emblems on the lower part of the fenders, and model-specific 22-inch wheels. Buyers have several options to choose from, including the Styling Specification and Blackline Specification packages. Inside, the Speed features Dinamica Pure upholstery, a redesigned instrument cluster, sport pedals, 24-way power-adjustable front comfort seats, and 14-way power-adjustable rear seats. Both rows of seats are heated, ventilated, and equipped with a massage function; Bentley argues that performance and comfort aren't mutually exclusive. Piano Black trim comes standard but other types of wood (like Crown Cut Walnut) are no-cost options. Pricing information for the 2023 Bentley Flying Spur Speed hasn't been released yet.   

BMW makes the M4 extra special with a huge wing

BMW has all of the bases covered in its lineup, especially when it comes to its 4 Series models. Don't like going to the track? There's the BMW 430i and 440i, which are available as a coupe and gran coupe. Drivers looking for a track-friendly car that can also be used on the road will be steered toward the M4. BMW even built the hardcore M4 GTS for drivers that spend all of their time on a track. Now, it looks like BMW is trying to bridge the gap between the M4 and the M4 GTS with a special-edition model. Our photographers caught BMW testing an M4 with some extreme aerodynamic components around the Nurburgring. With its aggressive front end, massive wing, and sporty rear diffuser, the prototype M4 appears to be similar to the special-edition M4 Competition Sport that BMW released in Spain. The Spain-only special edition was marketed as a softer version of the M4 GTS with less power and usable rear seats. With a similar look and visible rear seats, this prototype indicates a similar track-focused special edition model. Since the M4 is only a few years old, it's unlikely that BMW is testing a new model, but the automaker could be testing aerodynamic components for a refreshed model down the road. A cheaper, more usable M4 GTS, though, would be the perfect car to round out BMW's current lineup. Related Video: