98 Bentley Azure Only 22k Miles Chrome Wheels Walnut Veneer Trim Lct In Az on 2040-cars

Auto blog

Bentley plotting rear-drive Continental GT3-R?

Coupe, convertible or Flying Spur sedan: no matter what body-style you get, or what engine you specify, the Bentley Continental comes with all-wheel drive. It's been that way since the model line was first introduced a dozen years ago. But that looks poised to change... at least for one notable exception. According to Autocar, Bentley is all but certain to launch a rear-drive version of the Continental GT3-R sometime next year, ditching the front half of the drivetrain to cut a good 440 pounds off the curb weight to make it the lightest Conti yet. The Continental GT3-R launched last year with less weight and more power, along with a stiffer suspension, upgraded brakes and a titanium exhaust. It drew its inspiration from the Continental GT3 racer, but unlike the competition version, kept the AWD drivetrain in place. "A lot of people expected the GT3-R to be a proper rear-wheel-drive sports car," Bentley's chief engineer Rolf Frech said to Autocar, "but the problem was timing. We needed the car at the end of the first season of our GT3 racing car, and to do a proper change of the complete powertrain needed longer than we had. But we have the concept in our mind, so why not?" Denuded of its all-wheel drive, the Conti GT3-RS – assuming Porsche doesn't mind lending the name to its sister company – would be the most hardcore version of the go-to luxury coupe, and would promise to cut its already blitzkreig 3.6-second 0-60 time down even further. Especially if the 4.0-liter twin-turbo V8 were tuned to deliver even more than the 572 horsepower and 516 pound-feet of torque it already kicks out in the existing GT3-R. Chances are it'd be even less accessible, though: the 99 examples of the Conti GT3-R that are coming to the States out of the 300 total to be made already carry a $337k sticker price, and the rear-drive model would likely push the production:price see-saw even higher to the right.

Bentley Flying Spur pictures leaked early

We can imagine that automakers are among the groups salivating at the prospect of a colony on Mars - perhaps a photo studio on the red planet will be far enough away from the terrestrial Internet to keep everything they've got from leaking all over the web. In the midst of Bentley's teasing for the next-generation Flying Spur, someone got in early on a set of photos and decided to share them with us.
The transformation is all about character, the super sedan's lines getting injected with a whole lot more of it. The family face of the Continental line is evident, the new Spur getting a more upright grille than before and a Mulsanne-esque undivided lower grille. The front fenders get narrow, horizontal vents, and behind that the character line that starts with at the hood shutline runs in a long arc to the rear door, then rolls up into haunches that terminate at the very back. Lower down, a character line cuts up the bulk up the sides. In profile there is a definite hint of this being a junior Mulsanne.
The only item we see at the moment that could take some getting used to are the horizontal taillights. Housing a large single element topped by curved red brows, our initial impression is that they lack the flow of the rest of the car. Inside, it's what you'd expect from a Bentley.

Ducati Diavel for Bentley is the first collaboration between the brands

Sister companies Ducati and Bentley have joined forces for the first time to create a limited-edition version of the Diavel motorcycle. Inspired by the Batur, which is also a limited-edition model, the bike stands out with an elegant design that incorporates several Bentley styling cues. Although this is the first time Bentley's winged logo appears on a Ducati, it's not the first car-themed Diavel to come out of the Italian brand's design studio; it collaborated with Lamborghini on a Sian FKP 37-inspired 1260 Diavel in November 2020. Drawing inspiration from the sold-out Batur, designers added mesh inserts and red accents to the side air intakes, edition-specific fairing made with carbon fiber, and forged wheels shaped like the ones Bentley put on its limited-edition coupe. Scarab Green paint from the Bentley palette completes the look. The rider sits on an Alcantara-upholstered seat with red accents that echoes the Batur's interior and faces a redesigned instrument cluster. Ducati notes that buyers will receive the bike in a personalized wood case along with a certificate of authenticity, a motorcycle cover, and a passenger seat. The two companies also collaborated on a range of accessories that includes a helmet and a limited-edition jacket. Fitting the Diavel with Bentley's 6.0-liter twin-turbocharged W12 engine seemingly wasn't an option, so power comes from a stock, 1.2-liter V4 rated at 168 horsepower and 93 pound-feet of torque. If neither figure sounds impressive, keep in mind the standard Diavel weighs 520 pounds. Put another way, its power-to-weight ratio approaches that of a Bugatti Chiron. It's the two-wheel equivalent of a supercar. Ducati will build 500 units of the Diavel for Bentley. If that's not rare enough, it will make 50 additional examples of a version named Diavel for Bentley Mulliner that's reserved for Bentley customers. They'll notably have a broader scope of customization options to choose from. Featured Gallery Ducati Diavel for Bentley View 29 Photos Design/Style Bentley Motorcycle Luxury Performance