Florida Flawless-only 42k Miles-chrome Wheels-nicest 1999 Arnage On The Planet on 2040-cars

Auto blog

Bentley Continental GT3-R is a limited-edition racer for the street

Limited to just 300 examples worldwide, Bentley's new GT3-R is set to bring a bit of the brand's motorsports pedigree to the street. After all, the Flying B recently took the win at the Blancpain Endurance Series at Silverstone with its new Continental GT3, less than one year after the big racer's debut.
Like the road-going Conti GT, the GT3-R uses a twin-turbocharged 4.0-liter V8, tuned in this application to 572 horsepower and 516 pound-feet of torque - increases of 51 hp and 14 lb-ft from the already potent GT V8 S. That's enough to get the 4,839-pound Bentley to 60 miles per hour in just 3.6 seconds, on its way to a top end of 170 mph.
To make the GT3-R more hardcore than standard Continentals, the air suspension has been retuned, the brakes have been upgraded with carbon silicon discs, and there's a titanium exhaust that's good for 15 pounds of weight-savings - in all, the GT3-R is some 200 pounds lighter than a comparable GT V8 S.

Bentley Mulsanne EWB China Edition ironically celebrates London

Bentley's versed in special editions for China, although it's been a while since we last saw one. In 2010, the English automaker released the Continental GT Design Series China and Flying Spur Speed China, following that up a year later with the Linley Continental Flying Spur that was limited to a mere 10 units. This time around, 15 Chinese buyers get the chance to order the Bentley Mulsanne Extended Wheelbase China Edition in any color they want so long as it's black. This being a product of Bentley's Mulliner bespoke division, though, buyers do get a choice of two special blacks. Onyx black imbues the abyssal shade with "a hint of dark blue" as well as darker tones, resulting in the "deepest black finish offered by Bentley." Mulsanne shoppers who like their blacks a bit more uplifting should opt for Black Velvet, said to be "a richer black-based finish" shot through with red pigments, creating a color recalling black cherries. Both hues are hand-applied, as is the gold fine line running along the Mulsanne's shoulder. Further exterior highlights comprise the chrome Serenity grille with a double-diamond quilt pattern, a Union Jack on the C-pillar, 21-inch and 14-spoke polished Radiance wheels, exclusive welcome lamps, and polished, stainless steel Mulliner sill plates.  Three vogue, two-tone interiors will be available, in either Fireglow with Imperial Blue, Newmarket Tan with Burnt Oak, or Shortbread with Redwood. Crewe artists embroidered the hide covering each seat with "an expressive interpretation" of London's skyline that includes widely recognizable sights: Tower Bridge, the London Eye Ferris wheel, the Shard and Gherkin towers, and The O2 arena. The same design is inlaid into the chosen veneer on the passenger's side.   The 6.75-liter turbocharged V8 with 506 hp and 752 pound-feet of torque goes untouched. Bentley will share pricing only with the 15 souls ready to purchase, but the standard sedan starts at more than 5 million yuan, or almost $750,000 American. Buyers would be advised to have a Bentayga on hand to convey the funds to the dealership.

The 2020 Bentley Flying Spur has 3-D wood now, and it looks spectacular

This is the coolest wood you’re going to see today. We promise. Bentley is now manufacturing something it calls “Three-Dimensional Wood.” And yes, all wood we come into contact with is 3-D, but this stuff pops out at you like people and items do in a 3-D movie. YouÂ’ll find it in the rear door inserts of the Bentley Flying Spur, assuming the owner checked the box. One look at the photos will have you going, “how the Â… ?” Yes, itÂ’s pretty wild to see, and we can imagine the effect it has in person is even stronger. Bentley did explain how it made wood look like the diamond-quilted leather it uses in its seats, though. As one would expect from Bentley, itÂ’s a hell of a process.  Each rear door and quarter panel is crafted out of a single block of wood. Bentley uses either American Walnut or American Cherry timber. They start by machining the back of the log to match a die-cast aluminum door panel template. ItÂ’s bonded to the template, and then the difficult work begins. Skilled craftspeople carve the wood to its three-dimensional surface with a multi-axis routing machine to a tolerance of 0.1 mm. They then hand finish the cuts to achieve perfect results. Finally, a lacquer is applied to attain the color and texture that Bentley desires. Left: EXP 10 Speed 6 Concept; Right: Production Flying Spur pattern This design of wood was first seen in a Bentley concept from 2015. It was called the Bentley EXP 10 Speed 6 (shown above, left). After the positive reaction to that design, Bentley says it felt a production adaptation was in order.  “Three-Dimensional Wood is the next interior design element weÂ’ve taken from concept car idea to production reality,” Brett Boydell, Head of Interior Design for the Flying Spur said. “It works in perfect harmony with the three-dimensional leather quilting across the cabin of the Flying Spur and creates an even more special environment for those being driven.” If you were to count the number of carved diamonds in the wood, youÂ’d come to a total of 150 in the Flying Spur. As of now, the big sedan is the only Bentley this option is available in. We wouldnÂ’t be surprised if it expanded to others in the future. In addition to that, this is a design that could be translated into lesser luxury cars using cheaper processes and 3-D printing. Bring on the 3-D wood. Related Video: