2001 Bentley Arnage Red Label on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Bentley celebrates its founder with the Mulsanne W.O. Edition by Mulliner

July 10, 2018, marked the beginning of Bentley's centenary celebration. We can look forward to a year of commemorations, starting with the Mulsanne W.O. Edition by Mulliner, limited to 100 units. The sedan, available in standard, long-wheelbase, and Speed versions, celebrates founder Walter Owen Bentley and his 1930 8 Litre. The founder's personal car, the last vehicle he designed for his company and the second example off the production line, wore a coachbuilt body from Henry Jervis Mulliner & Co. That's the same Mulliner firm that personalizes Bentleys to this day. Walter Owen didn't get to enjoy his "ultimate expression of automotive engineering" for long; financial troubles forced him to sell it in 1931. Bentley bought the 8-Litre in 2006, and part of the "sympathetic" restoration meant replacing the crankshaft. That crank is the central feature of the W.O. Edition Mulsanne: Bentley cut the crankshaft into 100 pieces, and will place each piece inside a custom, illuminated cocktail cabinet in the rear quarters of the 100 special Mulsannes. Four different woods and aluminum create a marquetry scene that frames a glass display with the emblematic crankshaft. Around that, the show vehicle gets Heritage Hides in Fireglow, with Beluga details and stitching, Dark Stain Burr Walnute veneers, and Fireglow lambswool carpets. The exterior's drenched in Onyx, with Beluga Black wheels, accessorized by a chrome hood strip, optional chrome grille and surround, and discrete special edition badging. Customers can, naturally, option their own W.O. Edition Mulsannes any way they wish. Bentley's chosen to skip Goodwood as the reveal of this particular treat. The public unveiling comes on our shores, at next month's Monterey Car Week, on Aug. 24. Related Video:

Bentley seasons the Continental GT and Bentayga with carbon fiber pack

Because Bentley is Bentley, and nothing it offers is "regular," it has a different name for select features available on its vehicles. Rather than calling these options or packages, they are called "specifications." One of the specifications available on the Continental GT, Continental GT Convertible and the Bentayga is called the Styling Specification, and it brings gloss carbon fiber elements to these cars' exteriors.  Both the Bentayga and the Continental GT have numerous Specifications available for extra purchase. The Bentayga is available with a Blackline Specification, All Terrain Specification, City Specification, Event Specification, Smoker's Specification, Sunshine Specification and the Touring Specification. In addition to the Smoker's, City and Touring Specs, the Continental GT also offers the Diamond Knurling Specification, Mood Lighting Specification and Front Seat Comfort Specification. The Styling Specification, though developed to align with the vehicles' aerodynamics, are intended to create a visual impact, as the name suggests. This package uses high-gloss carbon fiber to shape a front bumper splitter, side skirts with metallic Bentley badges, a rear diffuser and the trunk spoiler. The Bentayga is slightly different from the Continental GT package, as it also features a bi-plane tailgate spoiler and rear screen strakes. Further options include carbon fiber front air blades, wing vents and mirror caps. The carbon fiber in the Styling Specification uses a 2x2 twill pattern with matching directional weave across every part. It is also hand-crafted in a way that the carbon fiber is mirrored at the center of the vehicle to create a balanced look that will please perfectionist minds. Bentley says the Bentley badges on the side skirts were created through 3D electroforming, which could generally be described as a more precise version of 3D printing. The badges were specifically designed to "minimize the risk of air bubbles forming in the lacquer overcoat" while introducing a textured look. The Styling Specification can be ordered for a new car or retrofitted on an old car. It will also soon be available on the Bentley Mulsanne. Related Video: