2000 Bmw Z3 2.8l Convertible 37k Miles 1 Owner Heated Seats Beautiful Fl Car on 2040-cars

Auto blog

BMW M boss denies supercar collaboration with McLaren

The first time there was a McLaren Honda Formula 1 team, McLaren did some moonlighting with BMW on a supercar for all time, the F1. It just so happens that McLaren Honda is a thing again, and Car magazine recently ran a piece saying McLaren and BMW would get back together on another hopped-up coupe with roughly the same working agreement as before: BMW supplies a screaming V8, McLaren builds the body to go around it. Only this time the car would be a BMW model, not a McLaren, and be BMW's version of the next-generation McLaren 650S. The Car piece said that BMW head of R&D Klaus Frolich first got in touch with McLaren nine months ago, however, the head of BMW's M division, Frank van Meel, said he doesn't know anything about it. Mentioning every BMW exec referred to in the story, van Meel told Australia's Motoring, "I haven't had a phone call, [CEO] Harald Kruger hasn't had a phone call, and Klaus Frohlich hasn't had a phone call." The Car story said the reason BMW hasn't done a conventionally powered exotic recently is that former CEO Norbert Reithofer didn't want anything to eclipse the i8, the i brand, and the eco credentials the brand is charged with promoting. Changes in the executive suite – new CEO, new M boss, new R&D chief – were thought to meant changes in approach. Not according to van Meel, who gave those same i brand reasons to Motoring as then reasons BMW has no interest in a 750-horsepower, quad-turbo coupe. On top of that, after spending billions to move the game forward with in-house carbon fiber technology, van Meel asked, "I don't understand why we would need to work with McLaren for a supercar anyway. All of the technologies the story suggested are technologies that are core competences here at BMW and at M. Nobody in the world is more advanced with carbon-fibre than we are." The extent of the denial is so detailed that we're inclined to believe BMW on this one; cover stories usually stop at curt phrases like "We have no knowledge of that" or "We don't comment on future product." So you can put away your dreams of a McLaren F1 Part Two. For now. Related Video:

BMW 1 Series prototype packs direct water injection

Just a few months ago, BMW showcased an M4 that was modified to serve as the safety car for the MotoGP racing series. The flashing lights and emergency equipment, however, weren't the only modifications BMW made to the performance coupe. It also packed an innovative new water injection system. And now it's furthering the development of that system by running it in a 1 Series hatchback as well. Revealed at the BMW Group Innovation Days 2015 event, this five-door 1 Series packs a three-cylinder gasoline engine – like the one found in a Mini or i8 – but fitted with the direct water injection system. In this application, the system sprays a fine mist of water – yep, regular old H2O – right into the combustion chamber. While mixing water with gasoline normally wouldn't be recommended, in this case it evaporates immediately and helps cool the engine from the inside, allowing it to run at higher efficiency. That cooler running engine brings with it several benefits. It delivers improved fuel economy and lower emissions, to start. It also allows for an earlier ignition point, higher compression ratio, and higher boost pressure in turbocharged engines, delivering increased output. It even cuts down on engine knocking (where combustion occurs spontaneously), reduces wear and tear on the engine, and makes better use of lower octane levels. If that sounds like a win-win-win... win (we're losing count of all the wins here), it's because BMW just may be on to something. Of course it does require a water tank to be fitted on board, which means added weight, but instead of requiring the driver fill up the water tank, BMW has fitted this prototype with a system that replenishes the water level from the air conditioning system when the vehicle is switched off. So unless it's being driven in a particularly extreme climate, it doesn't even need topping up. Add one more "win" to the list, then. Extra power, improved real-world fuel economy: Direct water injection enhances efficiency. With direct water injection for turbocharged petrol engines, the BMW Group has again succeeded in enhancing the capabilities of conventional engine technology through an ongoing process of refinement and improvement. The precisely controlled injection of water into the engine cylinders produces a cooling effect that boosts power and torque, particularly when operating at or near full throttle, while at the same time reducing fuel consumption and emissions.

BMW looking to save billions with cost cuts

BMW is planning a fairly extensive overhaul in a bid to recoup some its annual costs, with CEO Norbert Reithofer (pictured above) aiming to save three to four billion euro ($4 to $5.4 billion) per year to help keep the company's profit margins between eight and 10 percent, while also maintaining investments in production expansion and new tech. BMW's profit margins sat at 9.4 percent in 2013.
According to Automotive News Europe, Reithofer is none too pleased about costs at Mini and on the 1 Series, although neither AN nor its source story, from Germany's Manager Magazin, elaborate on what steps could be taken to improve losses on either project. That makes it hard to figure out just where the fat will be trimmed from.
What may happen, though, is that BMW attempts to trim 100 million euros ($135 million) from its German labor costs each year; a solution hinted at a few weeks ago by Germany newspaper Muenchner Merkur. While a dramatic cost reduction, 100 million euros still doesn't begin to even approach the savings envisioned by Reithofer.