1996 Bmw Z3 Convertible 1.9l 4 Cylinder 5 Speed Manual 1 Owner Low Mileage on 2040-cars

Auto blog

BMW recalls 6,073 units of i3 and Minis to replace airbag

BMW is replacing the passenger's side front airbag module on 6,073 vehicles in the US because of a supplier's manufacturing issue with the part. The affected models include the: 2014-2015 i3; 2014-2016 Mini Hardtop 2 Door Cooper and Cooper S; 2015-2016 Hardtop 2 Door John Cooper Works; and 2015-2016 Hardtop 4 Door Cooper and Cooper S. Because the airbag components aren't made correctly, they might not deploy with enough restraint in a low-speed collision. BMW isn't aware of any accidents or injuries from the problem, but this is still obviously a safety concern. According to company spokesperson David Buchko to Autoblog, customers will be notified about the issue by mail in November. As always, dealers will perform the replacements at no cost to owners. Related Video: RECALL Subject : Passenger Frontal Air Bag May not Deploy Properly Report Receipt Date: OCT 07, 2015 NHTSA Campaign Number: 15V628000 Component(s): AIR BAGS Potential Number of Units Affected: 6,073 All Products Associated with this Recall Vehicle Make Model Model Year(s) BMW I3 2014-2015 MINI COOPER 2014-2016 MINI COOPER S 2014-2016 MINI JOHN COOPER WORKS 2015-2016 Details Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2014-2016 MINI Cooper S and MINI Cooper two-door vehicles, 2015-2016 MINI John Cooper Works and MINI Cooper S and MINI Cooper four-door vehicles and 2014-2015 BMW i3 vehicles. Due to a manufacturing error, the passenger frontal air bag may not deploy properly in a low speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection." CONSEQUENCE: In the event of a vehicle crash, an air bag that does not deploy properly increases the risk of injury to the front seat passenger. REMEDY: MINI and BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall is expected to begin on November 20, 2015. Owners may contact MINI customer service at 1-866-825-1525 and BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. BMW Statement: BMW has informed NHTSA of its intention to voluntarily recall approximately 923 BMW i3 vehicles to replace the passenger-side front airbag module.

BMW recalling 40k+ motorcycles to replace rear wheel flange

A problem with the rear wheels on a wide array of its motorcycles has prompted BMW and the National Highway Traffic Safety Administration to issue a recall for 43,426 vehicles. In the affected units, the mounting flange on the rear wheel is at risk of cracking if the bolts are over-tightened. If that flange cracks, "the rear wheel may not remain secured to the motorcycle," which is kind of important considering there are only two wheels on a motorcycle to start with. The recall affects certain model-year 1200 and 1300 models – including the R1200GS, R1200RT, R1200GS, R1200R, R1200S, R1200ST, K1200S, K1200R, K1200R Sport, K1200GT, K1300S, K1300R and K1300GT – as well as the HP2 Megamoto, HP2 Enduro and HP2 Sport. Owners of the affects units can expect to head from the manufacturer to arrange having the aluminum flange replaced with a steel one. Related Video: RECALL Subject : Rear Wheel Mounting Flange may Crack Report Receipt Date: MAR 11, 2015 NHTSA Campaign Number: 15V141000 Component(s): WHEELS Potential Number of Units Affected: 43,426 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. CONSEQUENCE: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall is expected to begin April 21, 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Featured Gallery BMW HP2 Sport View 13 Photos News Source: National Highway Traffic Safety AdministrationImage Credit: BMW Recalls BMW Motorcycle bmw motorrad

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.