2019 Bmw X6 Xdrive35i on 2040-cars

Auto blog

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.

BMW invests in carbon fiber for use beyond i and M models

The immense amount of resources BMW has poured into its i brand program hasn't stopped, and recent developments indicate it's likely to pay off for BMW and BMW buyers outside the i brand. The i8 has already sold out its first year run, the i3 racked up 10,000 orders before it even went on sale and is already the subject of public discussion about being stretched into an i5, and a new investment in carbon fiber production has the automaker talking about CFRP use in non-i and non-M models.
BMW and SGL Group got together to form SGL Automotive Carbon Fibers (ACF), and the joint venture produces all of the CFRP for the i3 and i8 on two production lines at its plant in Moses Lake, Washington. After already investing $100 million to increase capacity, BMW has announced that another $200 million will add four more production lines, tripling production from 3,000 tons per year to 9,000 tons. When the expansion is complete in 2015, BMW says the Moses Lake facility will be the world's largest carbon fiber plant.
That's a lot of weave and the long view is that it will find its way into core models, with BMW exec Dr. Klaus Draeger saying, "As part of an intelligent mix of materials, we will apply carbon also beyond our BMW i and BMW M models in the future," and be able to do so "at competitive costs and in large quantities."

BMW recalling nearly 570,000 1 Series, 3 Series and Z4 models over electrical issue

BMW is recalling roughly 570,000 vehicles in the United States and Canada due to faulty battery cable connectors that can fail, causing the engines in these cars to stall. Of the nearly 570,000 affected vehicles, just over 504,000 are here in the US.
The affected vehicles include 1 Series coupes and convertibles (both 128i and 135i) from the 2008 to 2011 model years; 3 Series sedans, coupes, convertibles and sport wagons (both 328i and 335i) from the 2007 to 2011 model years; and Z4 roadsters from the 2009 to 2011 model years.
According to the National Highway Traffic Safety Administration, "the connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time," which can eventually lead to a break in the electrical connection and a loss of power in the vehicle. If the car loses power, the engine can stall, which could possibly lead to a crash. The Detroit News reports that BMW knows of one minor collision in Canada as a result of this problem, but no injuries.