2013 Bmw X6 M on 2040-cars

Auto blog

Why are all US-bound BMW i3 EVs with range extenders stuck at port?

The first BMW i3 EVs have been delivered in the US, but in a quirk of the rules, none of them have been the range-extended versions. Long-time BMW electric vehicle driver Tom Moloughney discovered this fact the hard way. His i3 REx has been sitting at a New Jersey port for over a week and he's getting impatient. The problem is something Moloughney calls a "Monroney Hold." So, instead of sitting there fuming, Moloughney did a bit of research and discovered that the problem is something he calls a "Monroney Hold." He says that "the EPA certification has not been completed so BMW doesn't have a Monroney label (window sticker) to post in the window before the car leaves the port, which is required by law. The range extender option changes (shortens) the car's electric range, and also requires an official MPG rating so BMW couldn't use the same Monroney label as they did for the all electric i3." You can read more on his website, but it turns out that the story isn't so simple. For one thing, the EPA testing has been finished. Washington State representative Chad Magendaz told Moloughney that he asked the EPA for an official statement and got the following from Linc Wehrly, Director of the Light-Duty Vehicle Center Compliance Division: "EPA tested the i3 REx and provided the results of that testing to BMW on May 13th. EPA is not aware of anything that would prevent BMW from importing the vehicles since May 13th." Then there's the official word from BMW. Spokesman Dave Buchko told AutoblogGreen that: We are moving as quickly as possible to release the first BMW i3 Range-Extender models to BMW i Centers. Receipt of test data from the EPA is one step, but not the final step, in the process of receiving certification from the EPA. Rules do not permit the release of vehicles for sale until EPA labels are finalized, produced and affixed to any vehicle. Barring any unforeseen delays, we expect that to happen by the end of this week. We have never certified a vehicle like this before. We are taking every precaution to make sure that everything is done in a timely, but more importantly correct manner. In that Monroney labels cannot be produced until the EPA certification process is complete, the characterization [of a "Monroney Hold"] is not technically incorrect, but there is more to it than that, as is often true in life. On a lighter note, BMW donated a loaded i3 to Brad Pitt's Make It Right charity foundation as a fundraiser. Read about that below.

BMW builds its 2 millionth 1 Series on eve of new model's launch

Hard as it may be to believe, it's been over ten years since BMW launched the first 1 Series, taking the Bavarian automaker into more accessible territory for the first time. Later this month, the first examples of the new model will arrive at dealers, but before it does, the littlest BMW has another reason to celebrate as the 2 millionth unit has rolled off the line. The landmark example is a 120i five-door equipped with the M Sport package and painted in Estoril Blue, bound for a customer in Japan. The achievement is even more noteworthy when you consider that what started out as the 1 Series has since been split into two lines. The three- and five-door hatchbacks remain part of the 1 Series, while the coupe and convertible we get in the US that were once part of the 1 Series as well have since been spun off as the separate 2 Series. Production of the three-door takes place exclusively at BMW's plant in Regensburg, while the five-door is split between Regensburg and a second plant in Leipzig. Buyers are further able to specify between diesel and gasoline engines ranging from three cylinders all the way up to six. Show full PR text Two reasons to celebrate: BMW 1 Series production hits the two-million mark – New edition writes a fresh chapter in the compact model's success story. Munich. 28 March 2015 sees the curtain raised on the market launch of the new BMW 1 Series. Fans of compact driving pleasure can look forward to an even more striking design, a further refined premium ambiance for the interior, engines that are extremely powerful and even more efficient, and innovative equipment features. Ahead of the launch, news filtered through from BMW Plant Regensburg of another reason to smile as the two-millionth BMW 1 Series rolled off the production line. The landmark car was built just a few days after the start of production for the new version of the compact model and is one of the first examples of the new BMW 1 Series range earmarked for export to Asia. The BMW 120i 5-door, painted in Estoril Blue metallic and equipped with an M Sport package, will be delivered to a customer in Japan. This production landmark at BMW Plant Regensburg represents another milestone in the international success story of the BMW 1 Series. In late summer 2014 the company celebrated the model series' tenth birthday.

AC Schnitzer packs 400-hp, tri-turbo diesel into 1 Series

At first blush, this might look like your run-of-the-mill BMW 1 Series, maybe with a few modifications. What you're actually looking at is a monster hot hatch with 400 horsepower and 590 lb-ft of torque. From a diesel. For this year's Essen Motor Show – Germany's equivalent to SEMA – the Bimmer specialists at AC Schnitzer prepared the ACS1 5.0d concept you see here. Its selling point (if only it were for sale) is the combination of BMW's most powerful diesel engine and its smallest model. It utilizes the 3.0-liter triple-turbocharged inline-six diesel engine from the M50d versions of the 5 Series, X5, and X6 sold in Europe. That engine is normally rated at 376 hp and 545 lb-ft, which is already a ton of muscle. But Schnitzer has bumped up the output on both counts, and slotted it into a 1 Series hatchback. The result is a 0-62 time of just 4.5 seconds, leaving the M135i and M235i in a cloud of diesel soot. Of course, Schnitzer has plenty more to showcase at Essen this year, including modifications for the 3 Series, X6 M, and Mini JCW. And you can bet all the other major European tuners will be on hand at the expo to show their wares, too. But as far as outlandish creations go, this monster diesel hot hatch is what's caught our attention. Compact and incredibly powerful The 1-series by AC Schnitzer with impressive motorsport quality At first sight, you do not expect brute force from the BMW 1-series. So the performance of the compact Bavarian after the AC Schnitzer tuning experts have equipped it with the M50d power plant and impressive performance upgrade, is even more incredible. Originally designed for the 5-series, the "Diesel M-Technik" pack propels the 1-series a long way forward. The smallest BMW series now has an impressive drive concept from AC Schnitzer. After the performance upgrade, the concept engine of the ACS1 5.0d delivers 294 kW/400 hp and 800 Nm torque for generous thrust. Equipped in this way, it takes just 4.5 seconds to sprint from 0-100 km/h. The acceleration from 80-180 km/h is even more impressive: the ACS1 5.0d takes just 7.9 second for this. The smallest of the compacts, the 114i, is already impressive thanks to a power increase by 52 hp to 154 hp. The four-cylinder petrol engine of the 116i, thanks to motorsport technology, now delivers 204 hp instead of 136 hp. The same figure is also achieved by the 118i, which previously had 170 horses under the bonnet.