2010 Bmw X6 on 2040-cars

Auto blog

BMW recalls 6,073 units of i3 and Minis to replace airbag

BMW is replacing the passenger's side front airbag module on 6,073 vehicles in the US because of a supplier's manufacturing issue with the part. The affected models include the: 2014-2015 i3; 2014-2016 Mini Hardtop 2 Door Cooper and Cooper S; 2015-2016 Hardtop 2 Door John Cooper Works; and 2015-2016 Hardtop 4 Door Cooper and Cooper S. Because the airbag components aren't made correctly, they might not deploy with enough restraint in a low-speed collision. BMW isn't aware of any accidents or injuries from the problem, but this is still obviously a safety concern. According to company spokesperson David Buchko to Autoblog, customers will be notified about the issue by mail in November. As always, dealers will perform the replacements at no cost to owners. Related Video: RECALL Subject : Passenger Frontal Air Bag May not Deploy Properly Report Receipt Date: OCT 07, 2015 NHTSA Campaign Number: 15V628000 Component(s): AIR BAGS Potential Number of Units Affected: 6,073 All Products Associated with this Recall Vehicle Make Model Model Year(s) BMW I3 2014-2015 MINI COOPER 2014-2016 MINI COOPER S 2014-2016 MINI JOHN COOPER WORKS 2015-2016 Details Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2014-2016 MINI Cooper S and MINI Cooper two-door vehicles, 2015-2016 MINI John Cooper Works and MINI Cooper S and MINI Cooper four-door vehicles and 2014-2015 BMW i3 vehicles. Due to a manufacturing error, the passenger frontal air bag may not deploy properly in a low speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection." CONSEQUENCE: In the event of a vehicle crash, an air bag that does not deploy properly increases the risk of injury to the front seat passenger. REMEDY: MINI and BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall is expected to begin on November 20, 2015. Owners may contact MINI customer service at 1-866-825-1525 and BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. BMW Statement: BMW has informed NHTSA of its intention to voluntarily recall approximately 923 BMW i3 vehicles to replace the passenger-side front airbag module.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

2016 BMW X1 First Drive [w/video]

Perhaps more than any other model, the X1 exemplifies the shift going on at BMW. That the X1 is the first front-drive-based car to wear the BMW badge in the US is both remarkable and doesn't matter at all. Some background: The first X1, sold here for the latter half of its six-year run, was an Old BMW. Based on E90 3 Series underpinnings, it was basically a tall, last-gen 3 wagon, a car on short stilts. We loved it. It drove almost exactly like a good 3 Series at a time when that 3 Series was no longer available. It sold in okay numbers. It's gone now. This new X1, the 2016 model, is a sort of about face, or at least a right-hand turn in the engine compartment. This is New BMW. The base engine is again a 2.0-liter four-cylinder, a new design based on the company's modular engine architecture that can spit out threes, fours, and sixes using the same component set. It's mounted transversely, not longitudinally like in the rest of BMW's US offerings. It loses some horsepower to the last X1's 2.0 (228 hp versus 240) and a bit of torque (258 lb-ft down from 260). Again, few will notice. The optional 3.0-liter turbocharged six from the last generation is gone. Not many customers chose it, and the six likely wouldn't fit under the hood of this rearranged X1. EPA fuel-economy numbers match those from the 2015 xDrive28i exactly – 22 mpg city, 32 highway – so no gains there. So packaging won. There's really no other explanation for the longitudinal-transverse swap, except that maybe it's less expensive to build this way. EPA fuel-economy numbers match those from the 2015 xDrive28i exactly – 22 mpg city, 32 highway – so no gains there. But the packaging advantages are abundant. The interior is somewhat narrow, but it's opened up a bit by the lack of a transmission tunnel that would normally eat space between the front occupants. Instead, the center console is set low, with a tall shift lever rising practically from the floor up to meet your hand. There's storage forward of the shifter and a folding center armrest that opens for small items. The original X1 was sold here with rear-wheel as well as all-wheel drive. For obvious reasons, that won't be the case this time around. BMW also won't sell a front-drive model here (although one is offered in Europe and elsewhere) likely because it would involve the admission that this is not your average BMW, but instead a New BMW, one designed for more people and fewer enthusiasts.