Clean Carfax & Autocheck!! Tech Pkg, Conv Pkg, Heated Seats, Pano Roof, Sirius on 2040-cars

Auto blog

Ex-Rolls-Royce design chief Ian Cameron killed at home

Former Rolls-Royce design chief Ian Cameron, the man who oversaw the automaker's design renaissance with the Phantom and Ghost ranges, was stabbed to death at his home in Bavaria (translated) on July 12. German newspaper reports have identified a suspect via surveillance camera (translated) whom police say is the killer. Apparently, the man went shopping at a store less than a mile from Cameron's house, then changed clothes and showed up at Cameron's door. A surveillance image before the suspect gets to the house shows him wearing the items that neighbors described, notably light pants, a dark blue hoodie, a red backpack and "yellow-green gloves." Someone reportedly cut the wires on the home security system, the suggestion being that the suspect or someone else involved had cased the house for at least a few days. It's said the killer rang the doorbell, attacking as soon as Cameron opened the front door, stabbing the designer to death. Verena Kloos, Cameron's wife, escaped to a neighbor's house and called police. This is a bizarre incident. Reports have floated the motivation that the killer wanted one of the vehicles in Cameron's car collection at the Bavarian property. Instead of going after a car, though, the killer ran off in his distinctive outfit, staying in the open long enough for neighbors to give a detailed description. He then changed clothes and ditched the backpack on a lakeside promenade not far from Cameron's house. Strangest of all, the man apparently left the clothes near the backpack, and the backpack contained items the man had bought during his shopping trip before the murder.  At the time of writing, police are searching throughout Germany but haven't caught the suspect. With a clear picture and a likely trove of DNA evidence, authorities have excellent leads. Anyone who can help is asked to get in touch with the Furstenfeldbruck Criminal Investigation Department at (+49) 8.14.16.120. Cameron's career started at Pininfarina in 1975, culminating in a greatest hits of designs while at BMW. He has exterior design of the third-generation Range Rover on his resume, as well as the BMW Z8. It was Cameron's Phantom, though, that helped create an entirely new Rolls-Royce after BMW bought the brand. CEO Chris Brownridge wrote on LinkedIn that "Ian played a significant role in shaping Rolls-Royce from when it was first acquired by BMW Group and moved to its home at Goodwood, West Sussex.

Cadillac CT5 vs. BMW 3 Series | How they compare on paper

Cadillac just introduced the CT5 sedan at the 2019 New York Auto Show, and it's set to replace both the larger CTS and smaller ATS in the brand's lineup. We have all the details and features for you, in addition to a deep dive with the car's chief engineer, but now it's time to see how it stacks up to the long-time standard bearer in this class: the BMW 3 Series. Now, the car is a bit larger than the completely new 2019 3 Series, but Cadillac says the 3 and the rest of the compact luxury sedan class is its target for this car. We'll dive further into this little conundrum later. This comparison will look at how these vehicles measure up on paper, as we haven't driven the CT5 yet. That will come later, but we're expecting it to be a proper sport sedan competitor with the 3 Series, since Cadillac is building it off GM's dynamically superb Alpha platform. Now let's get on with the comparison. Powertrains and performance Both of these sedans come standard with 2.0-liter turbocharged four-cylinder engines. The BMW four-pot is a bit more potent, coming in with 18 more horsepower and 37 pound-feet of torque more than the Cadillac. Here's our driving review of the BMW. The only upgrade engine for both available initially are turbocharged six-cylinders. BMW offers up its revised inline-six, while Cadillac offers a V6. These six-cylinders are both 3.0 liters. Cadillac bests the BMW in brute torque by 31 pound-feet, but BMW takes the horsepower prize, making 47 more ponies. It's hard to say which car will actually be faster to 60 mph — they'll probably end up being about the same once official numbers are out. This segment used to be one guaranteed to offer a manual transmission, but that's not the case anymore. Neither Cadillac nor BMW will offer a manual to start, but expect to see the stick shift return to higher performance models of each car. For now, they both get torque-converter-style automatic transmissions. One dimension that isn't going away from either anytime soon is rear-wheel drive. Both cars offer rear-wheel and all-wheel drive in every spec available. Fuel economy for the 3 Series is impressive at 30 mpg combined with the four-cylinder. We'll have to wait and see if Cadillac can challenge that figure with its less powerful engine. Size and practicality Here's where a lot of the confusion about the Cadillac CT5 sets in. The CT5 is a tad larger than the 3 Series in its exterior dimensions, but the interior specs are nearly identical.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.