2005 Bmw X5 on 2040-cars

Auto blog

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.

BMW considering North American engine plant?

BMW may be set to expand its US operations with a new engine plant, Bloomberg reports. The Bavarian automaker already has its Spartanburg, SC factory which builds the company's X3, X5 and X6 crossovers. According to the story, Mexico is also under consideration for the BMW engine factory, with the report claiming a final decision will be made in 2014.
"Establishing local motor manufacturing abroad is more complex than assembling cars, but it's a logical step for them to eventually start making engines in markets where they're expanding vehicle production," Juergen Pieper, an analyst for Bankhaus Metzler tells Bloomberg. Building engines in the US or Mexico would save BMW from having to ship engines for some of its most popular models across the Atlantic.
BMW, for its part, hasn't said anything concrete. Spokesman Mathias Schmidt is quoted in the story saying, "As part of our long-term growth strategy, we're frequently looking at different countries for possible locations of future production facilities. No decisions have been made yet, though, for an additional plant."

BMW 4 Series Convertible basks in the sun

The BMW 4 Series Convertible will show its non-camouflaged face sometime later this year, but our spies recently caught this nearly naked prototype out getting some sun. As you'll recall, the droptop 4 Series replaces the 3 Series Convertible in the BMW range, and if our recent stint behind the wheel of the new 435i Coupe is anything to go on, this topless 4er should be quite a fun runabout for sun-drenched motoring.
To no one's surprise, the 4 Series Convertible shares all of its design with the 4 Series coupe, save, of course, the obvious roofectomy. Beyond that, the topless 2+2 will use the same engines and transmissions as the coupe, meaning it should arrive in the US in both 428i and 435i guises, powered by a 2.0-liter turbocharged inline-four and 3.0-liter turbocharged inline-six, respectively. Both six-speed manual and eight-speed automatic transmissions will be available.
The car spied this time around has the full M Sport visual treatment, with the revised (and better-looking) front fascia, larger 19-inch wheels, and attractive Melbourne Red paint. Interestingly, it appears this prototype has the standard xenon headlamp setup, rather than the full-LED option that's also available.