*** 2008 Bmw X5 Sport 4.8i Fully Loaded *** 22" Lexani Staggered Rims on 2040-cars

Auto blog

BMW offers M Performance Power Kit for 2012 335i sedan

BMW has let loose a new M Performance Power Kit for its F30-generation 335i and 335i xDrive sedans. Starting at $1,100 for the kit - installation is extra - your car will be fitted with a new ECU and air intake on the functional side and an M Performance engine cover and rocker panel stickers on the decorative side. The Power Kit raises the 3.0-liter inline six-cylinder's horsepower rating from 300 to 320, and on automatic models, torque gets a boost from 300 pound-feet to 332 lb-ft - manual transmission models get a smaller bump to 317 lb-ft.
According to the Bavarian automaker, you'll be able to hear the change in the overrun exhaust note, and 0-60 mile-per-hour times drop by 0.2 seconds. The package is available now at all BMW Centers in the US, and if you get it installed when you purchase the car new, it will get the same four-year, 50,000-mile warranty as the vehicle. Have it done after the fact and the kit will be warranted for two years and unlimited miles. There's a press release below with some more details.

2015 BMW i8 Prototype

M Meets Edison
The real telling moment for the new BMW i division will be seeing how the recently tested 2014 i3 sells in its various markets, since that is the car that changes how we perceive our expectations of the brand. But this 2015 BMW i8 green supercar has all the earmarks of a slam-dunk project, we just needed to drive it and make sure for ourselves.
BMW has a spectacular test facility in southern France, called Miramas, and that's where we just had our first brief go behind the wheel of the i8. There were three cars for us there and they were dressed up in exactly the same paisley camo that we've all seen in the spy photos published everywhere for the past year. The interiors, though swathed in masking to hide all the details, varied in their color.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.