Awd Auto Prem & Sport Pkg Htd Seats Moonroof 17k Must See And Drive Save on 2040-cars

Auto blog

BMW plugs in new X5 xDrive40e PHEV crossover

BMW broke with its own convention when it rolled out the original X5 back in 1999, and did it again when it launched the i3 and i8 plug-in hybrids in 2013. Now it's bringing the two together with the reveal of the new X5 xDrive40e. Based on the third-generation F15 model and previewed by the X5 eDrive concept at the 2013 Frankfurt Motor Show, the X5 xDrive40e is the first PHEV from the core BMW brand. Its hybrid powertrain pairs a 2.0-liter turbo four (itself good for 245 horsepower and 258 pound-feet of torque) to an electric motor integrated into the eight-speed automatic transmission (contributing another 113 hp and 184 lb-ft) for a total combined output of 313 hp and 332 lb-ft. That makes it more powerful by both counts than the six-cylinder X5 xDrive35i (though considerably less so than the V8-powered xDrive50i), giving it a quoted 0-62 time of 6.8 seconds and an electronically limited top speed of 130 mph. But it can travel up to 19 miles on electric power alone, at which top speed is limited to 75 mph. BMW has mounted the 9-kWh lithium-ion battery pack underneath the luggage floor, limiting cargo capacity to between 17.65 and 60.7 cubic feet, depending on how you set up the rear seats. An adaptive suspension keeps it all on an even keel, with power transmitted to all four wheels through a permanent all-wheel-drive system. An M model it is not, but the Bavarian automaker will offer it with an M Sport package. Full details on pricing and availability have yet to be announced, but the X5 xDrive40e is set to hit European dealers in the fall. The BMW X5 xDrive40e The first plug-in hybrid production car from the BMW core brand is a Sports Activity Vehicle. Permanent all-wheel drive and the BMW EfficientDynamics eDrive technology endow the BMW X5 xDrive40e with sensational sportiness and supreme poise on the one hand and outstanding efficiency on the other. With a total system output of 230 kW/313 hp generated by a four-cylinder petrol engine with BMW TwinPower Turbo technology and a synchronous electric motor, the BMW X5 xDrive40e achieves a combined fuel consumption of 3.4 – 3.3 litres per 100 kilometres (83.1 – 85.6 mpg imp) and a combined electricity consumption of 15.4 – 15.3 kWh over the same distance. CO2 emissions come in at 78 – 77 grams per kilometre (figures according to EU test cycle for plug-in hybrid vehicles, may vary depending on the tyre format specified).

BMW i8 Spyder production could still be years away

BMW will still build a convertible version of the i8, but production of the droptop hybrid sports car won't happen for at least a couple more years. That's according to an anonymous BMW insider speaking to Motoring. "There will be no new i models in 2016. Not even the convertible," the insider told the Australian publication. While the i8 Spyder might not arrive for a while, the company still sees a place for it in the model range. "The i8 is selling well enough now, so the lineup doesn't strictly need it," another unnamed BMW insider told Motoring. "We are doing it, we are just doing it slowly because it's not all we are doing." The automaker sold 2,265 examples of the i8 in the US in 2015, which was up from 555 in 2014. BMW first imagined the convertible i8 with the Spyder concept way back in 2012, and a report in 2013 hinted that it was near production, which never happened. The company then sliced off the sports car's doors and roof for the orange I Vision Future (pictured above) at the recent 2016 Consumer Electronics Show. The concept's open design gave BMW an easy place to show off the AirTouch gesture control system at the tech event. These insider claims are a complete reversal from BMW CEO Harald Kruger's assertion in December that the company would soon unveil the production i8 Spyder. The boss didn't indicate the debut's exact timing, but it seemed a lot sooner than at least a year from now. We'll have to wait and see. Related Video:

BMW to offer carbon fiber wheels in a year or two

The Citroën SM sat on the first set of production glass fiber and resin wheels in 1972 when parent company Michelin developed the exotic hoops in order to take the SM rallying. It wasn't until 2008 that we got the first all-carbon-fiber wheel for passenger cars in the form of a prototype model from Weds Sports in Japan that remained a prototype. Australian company Carbon Revolution followed that a year later with its CR-9 all-CF wheel, first introduced on the Shelby Ultimate Aero and now available for independent purchase for about $15,000 per set. BMW could be the first OEM to offer entire wheels in carbon fiber reinforced plastic in two years.
The wheels - either all-CFRP or using a CFRP rim and alloy spokes - were shown off during BMW's Innovation Days in Munich and are products of the development work done on its i-branded cars. The full-CFRP wheel is 35-percent lighter than a forged alloy wheel, the hybrid alloy and CFRP wheel is 25-percent lighter, making for a decent drop in unsprung rotating weight. As demonstrators during a tech day the wheels aren't yet in the pipeline for production and EU approval, but an article in Auto Express claims that they could be on the market as soon as two years from now.
Other possible parts include a full carbon fiber steering wheel and propeller shaft, the latter of which is coming as a single-piece component on the new M3 and M4. BMW is also talking up its use of secondary carbon fiber - waste material from i3 and i8 production - that can be used for items like IP support structures, seat frames and spare wheels in place of traditional metals like aluminum and magnesium. There's an excerpt of the Innovation Day press release below with more details.